Effect of ZrC particle distribution on the ablation resistance of C/C-SiC-ZrC composites fabricated using precursor infiltration pyrolysis

[1]  Xiaodong Wang,et al.  The effect of sol-gel process on the microstructure and particle size of ZrC–SiC composite powders , 2020 .

[2]  Yongchang Liu,et al.  W-Y2O3 composite nanopowders prepared by freeze-drying method and its sintering characteristics , 2019, Journal of Alloys and Compounds.

[3]  Hong Wang,et al.  Effect of ZrC amount and distribution on the thermomechanical properties of C f /SiC‐ZrC composites , 2019, International Journal of Applied Ceramic Technology.

[4]  Yi Zeng,et al.  Bubble phenomenon of ZrB2 based composites at high temperatures , 2019, Ceramics International.

[5]  K. He,et al.  Microstructure and ablation properties of La2O3 modified C/C-SiC composites prepared via precursor infiltration pyrolysis , 2019, Journal of the European Ceramic Society.

[6]  Jianfeng Huang,et al.  Microstructure and ablation properties of C/C-Zr-Si-O composites prepared by carbothermal reduction of hydrothermal co-deposited oxides , 2018, Materials & Design.

[7]  Mehdi Shahedi Asl,et al.  Effects of carbon additives on the properties of ZrB2–based composites: A review , 2018 .

[8]  Yiguang Wang,et al.  Comparative ablation behaviors of C/SiC-HfC composites prepared by reactive melt infiltration and precursor infiltration and pyrolysis routes , 2017 .

[9]  Xiaohong Shi,et al.  Effects of low-temperature thermal cycling treatment on the microstructures, mechanical properties and oxidation resistance of C/C-ZrC-SiC composites , 2017 .

[10]  Hejun Li,et al.  Effects of high-temperature annealing on the microstructures and mechanical properties of C/C–ZrC–SiC composites prepared by precursor infiltration and pyrolysis , 2016 .

[11]  Hejun Li,et al.  Effect of ZrO2 morphology on the ablation resistance of carbon/carbon composites containing ZrC prepared by the carbothermal reduction reaction , 2016 .

[12]  Liping Wang,et al.  Ablation mechanism of C/C–ZrB2–ZrC–SiC composite fabricated by polymer infiltration and pyrolysis with preform of Cf/ZrB2 , 2015 .

[13]  Qizhong Huang,et al.  Microstructure and ablation behavior of C/C–HfC composites prepared by precursor infiltration and pyrolysis , 2015 .

[14]  K. Sharp.  The Fabrication and Performance of High Temperature Carbon-Carbon Composites Containing Tantalum Filler , 2015 .

[15]  Xiaohong Shi,et al.  Effect of ZrB2 and SiC distributions on the ablation of modified carbon/carbon composites , 2015 .

[16]  Rongjun Liu,et al.  Ablation behavior and mechanism of C/ZrC, C/ZrC–SiC and C/SiC composites fabricated by polymer infiltration and pyrolysis process , 2014 .

[17]  Aijun Li,et al.  Microstructure and ablation mechanism of C/C–SiC composites , 2014 .

[18]  Qizhong Huang,et al.  Microstructure and ablation behavior of SiC coated C/C–SiC–ZrC composites prepared by a hybrid infiltration process , 2013 .

[19]  W. Li,et al.  Residual compressive and thermophysical properties of 4D carbon/carbon composites after repeated ablation under oxyacetylene flame of 3000 °C , 2013 .

[20]  Yu Zhou,et al.  Effect of ZrC particle size on microstructure and room temperature mechanical properties of ZrCp/W composites , 2010 .

[21]  X. Xi,et al.  Preparation and performance of LiFePO4 and LiFePO4/C cathodes by freeze-drying , 2010 .

[22]  X. Xi,et al.  Synthesis and characterization of ultrafine WC–Co by freeze-drying and spark plasma sintering , 2009 .

[23]  Guobing Zhang,et al.  Effect of ZrB2 on the ablation properties of carbon composites , 2006 .

[24]  Donghwan Cho,et al.  Microstructural interpretation of the effect of various matrices on the ablation properties of carbon-fiber-reinforced composites , 2001 .