Characteristics of residual products in HF gas-phase etching of sacrificial oxides for silicon micromachining

We employed a newly developed HF gas-phase etching (GPE) process for the removal of sacrificial oxides. The structural layers are P-doped multi-stacked polysilicon and silicon epi-layer of SOI substrates and sacrificial layers are TEOS, LTO, PSG, and thermal oxides on silicon nitride or polysilicon substrates. The characteristics of residual products on polysilicon or silicon nitride were scrutinized by using SEM and AES. After GPE of TEOS, LTO, and PSG on the silicon nitride substrate, the polysilicon microstructures are stuck to the underlying substrate because neither the SiOxNy layers nor the H3PO4(H2O) layer vaporize. We found that the etching of TEOS, LTO, and thermal oxide on a polysilicon substrate shows no residual product and no stiction.

[1]  J. J. Sniegowski,et al.  Advances in processing techniques for silicon micromechanical devices with smooth surfaces , 1989, IEEE Micro Electro Mechanical Systems, , Proceedings, 'An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots'.

[2]  Hyung Joun Yoo,et al.  Modeling and Characterization of Gas‐Phase Etching of Thermal Oxide and TEOS Oxide Using Anhydrous HF and CH 3 OH , 1996 .

[3]  H. Watanabe,et al.  Influence of Water Adsorption/Desorption Processes on the Selectivity of Vapor HF Etching , 1995 .

[4]  S.-L. L. Chang,et al.  Anhydrous HF etch reduces processing steps for DRAM capacitors , 1998 .

[5]  Jong Duk Lee,et al.  Polysilicon Surface Modification Technique To Reduce Sticking Of Microstructures , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[6]  Roger T. Howe,et al.  Ammonium Fluoride Anti-stiction Treatments For Polysilicon Microstructures , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[7]  Jong Hyun Lee,et al.  Characterization of anhydrous HF gas-phase etching with CH3OH for sacrificial oxide removal , 1998 .

[8]  S. Ohnishi,et al.  Selective Etching of Phosphosilicate Glass with Low Pressure Vapor HF , 1995 .

[9]  Chih-Ming Ho,et al.  In situ monitoring and universal modelling of sacrificial PSG etching using hydrofluoric acid , 1993, [1993] Proceedings IEEE Micro Electro Mechanical Systems.

[10]  H. Tilmans,et al.  Stiction of surface micromachined structures after rinsing and drying: model and investigation of adhesion mechanisms , 1994 .

[11]  C. Hsu,et al.  Mechanical stability and adhesion of microstructures under capillary forces. I. Basic theory , 1993 .

[12]  T. Ohmi,et al.  Gas-phase selective etching of native oxide , 1990 .