Closure of circular arc cracks under general loading: effects on stress intensity factors

The two-dimensional circular arc crack solution of Muskhelishvili (Some basic problems of the mathematical theory of elasticity, P. Noordhoff Ltd, Groningen, Holland, 1953) has been used widely to study curved crack behavior in an infinite, homogeneous and isotropic elastic material. However, for certain orientations and magnitudes of the remotely applied loads, portions of the crack will close. Since the analytical solution is incorrect once the crack walls come into contact, the displacement discontinuity method is combined with a complementarity algorithm to solve this problem. This study uses stress intensity factors (SIFs) and displacement discontinuities along the crack to define when the analytical solution is not applicable and to better understand the mechanism that causes partial closure under various loading conditions, including uniaxial tension and pure shear. Closure is mainly due to material from the concave side of the crack moving toward the outer crack surface. Solutions that allow interpenetration of the crack tips yield non-zero mode I SIFs, while crack tip closure under proper contact boundary conditions produce mode I SIFs that are identically zero. Partial closure of a circular arc crack will alter both mode I and II SIFs at the crack tips, regardless of the positioning or length of the closed section along the crack. Friction on the crack surfaces in contact changes the total length and positioning of closure, as well as generally decreases the magnitude of opening along the portions of the crack that are not closed.

[1]  P. C. Paris,et al.  The Stress Analysis of Cracks Handbook, Third Edition , 2000 .

[2]  D. Bernoulli,et al.  Listric Normal Faults , 1981 .

[3]  G. England.  Steady-state stresses in concrete structures subjected to sustained temperatures and loads: Part II. cases of three dimensional stress: Hollow cylinder and hollow sphere☆ , 1966 .

[4]  B. Lawn.  Fracture of Brittle Solids by Brian Lawn , 1993 .

[5]  S. L. Crouch,et al.  Boundary element methods in solid mechanics , 1983 .

[6]  J. Olson.  Fracture aperture, length and pattern geometry development under biaxial loading: a numerical study with applications to natural, cross-jointed systems , 2007 .

[7]  J. Rice,et al.  Slightly curved or kinked cracks , 1980 .

[8]  John R. Lister,et al.  Calculation of dike trajectories from volcanic centers , 2002 .

[9]  G. C. Sih,et al.  Elastostatic problems of curvilinear cracks in bonded dissimilar materials , 1967 .

[10]  N. Muskhelishvili.  Some basic problems of the mathematical theory of elasticity , 1953 .

[11]  F. Erdogan,et al.  On the numerical solution of singular integral equations , 1972 .

[12]  H. Gerçek,et al.  Poisson's ratio values for rocks , 2007 .

[13]  David D. Pollard,et al.  On the patterns of wing cracks along an outcrop scale flaw: A numerical modeling approach using complementarity , 2008 .

[14]  M. Williams.  The stresses around a fault or crack in dissimilar media , 1959 .

[15]  L. Lonergan,et al.  The control of stress history and flaw distribution on the evolution of polygonal fracture networks , 2003 .

[16]  Kjell Eriksson,et al.  A path independent integral for the crack extension force of the circular arc crack , 2000 .

[17]  G. Ravichandran,et al.  Crack initiation in brittle solids under multiaxial compression , 2003 .

[18]  G. England.  Steady-state stresses in concrete structures subjected to sustained temperatures and loads: Part I. Cases of uniaxial stress , 1966 .

[19]  Gao Huajian,et al.  Slightly curved or kinked cracks in anisotropic elastic solids , 1992 .

[20]  Michael C. Ferris,et al.  Compressional fractures considered as contact problems and mixed complementarity problems , 2000 .

[21]  Michael C. Ferris,et al.  Interfaces to PATH 3.0: Design, Implementation and Usage , 1999, Comput. Optim. Appl..

[22]  A. Bobet,et al.  Stress and displacement discontinuity element method for undrained analysis , 2005 .

[23]  Christopher K.Y. Leung,et al.  A fast iterative boundary element method for solving closed crack problems , 1999 .

[24]  J. Arora,et al.  Review of formulations for elastostatic frictional contact problems , 2000 .

[25]  Debashis Khan,et al.  Circular arc crack under dynamic load: a generalized approach for energy release rate , 2006 .

[26]  Experimental study on Young’s modulus of concrete , 2000 .

[27]  C. Cramez,et al.  Allochthonous salt, structure and stratigraphy of the north-eastern Gulf of Mexico. Part II: Structure , 1990 .

[28]  M. Ferris,et al.  Numerical models of shear fracture propagation , 2004 .

[29]  S. Dirkse,et al.  The path solver: a nommonotone stabilization scheme for mixed complementarity problems , 1995 .

[30]  M. Comninou.  On the frictional contact in crack analysis , 1979 .

[31]  J. W. Shelton.  Listric Normal Faults: An Illustrated Summary , 1984 .

[32]  K. Broberg.  Cracks and Fracture , 1999 .

[33]  N. Laws,et al.  CLOSURE OF AN ARC CRACK IN AN ISOTROPIC HOMOGENEOUS MATERIAL DUE TO UNIAXIAL LOADING , 1992 .

[34]  S. Matysiak,et al.  On crack problems in periodic two-layered elastic composites , 1988 .

[35]  M. Toya,et al.  A crack along the interface of a circular inclusion embedded in an infinite solid , 1974 .

[36]  Dugdale model solution for an infinite plate with a circular arc crack , 1993 .

[37]  C. E. Freese,et al.  On the “overlapping” problem in crack analysis , 1976 .

[38]  Semi-inverse method for solving circular arc crack problems , 2004 .

[39]  David D. Pollard,et al.  The geometry of echelon fractures in rock: implications from laboratory and numerical experiments , 1993 .

[40]  C. Chao,et al.  Thermal problem of curvilinear cracks in bonded dissimilar materials , 1993 .

[41]  Hiroshi Tada,et al.  The stress analysis of cracks handbook , 2000 .

[42]  Maria Comninou,et al.  Interface Crack With Friction in the Contact Zone , 1977 .

[43]  Maria Comninou,et al.  Can two solids slide without slipping , 1978 .

[44]  Mark Hoffman,et al.  Curved crack propagation in homogeneous and graded materials , 2005 .

[45]  Richard A. Schultz,et al.  Stress intensity factors for curved cracks obtained with the displacement discontinuity method , 1988, International Journal of Fracture.

[46]  S. L. Crouch.  Solution of plane elasticity problems by the displacement discontinuity method. I. Infinite body solution , 1976 .

[47]  J. Cole,et al.  Calderas and caldera structures: a review , 2005 .