The development of in-process monitoring and control techniques for aerospace applications of Friction Stir Welding

............................................................................................................... 15

[1]  J. A. Schneider,et al.  Characterization of plastic flow and resulting microtextures in a friction stir weld , 2004 .

[2]  Wenya Li,et al.  Mechanical properties and fatigue crack growth rates in friction stir welded nugget of 2198-T8 Al–Li alloy joints , 2013 .

[3]  Jeroen De Backer,et al.  Robotic Friction Stir Welding for Automotive and Aviation Applications Robotic Friction Stir Welding for Automotive and Aviation Applications Robotic Friction Stir Welding for Automotive and Aviation Applications , 2022 .

[4]  Lawrence E Murr,et al.  Tool wear in the friction-stir welding of aluminum alloy 6061 + 20% Al2O3: A preliminary study , 2001 .

[5]  T. Prater,et al.  Predictive Process Modeling of Tool Wear in Friction Stir Welding of Metal Matrix Composites , 2012 .

[6]  Alvin M. Strauss,et al.  Exploiting robotic link deflection for low-cost force measurement in manufacturing , 2012 .

[7]  M. Skinner,et al.  Improvements to the FSW Process Using the Self-Reacting Technology , 2003 .

[8]  George E. Cook,et al.  Robotic Arc Welding: Research in Sensory Feedback Control , 1983, IEEE Transactions on Industrial Electronics.

[9]  Paul A. Colegrove,et al.  Development of the Trivex friction stir welding tool for making lap welds , 2004 .

[10]  I. Eberl,et al.  Friction stir welding dissimilar alloys for tailoring properties of aerospace parts , 2010 .

[11]  Jeroen De Backer,et al.  A local model for online path corrections in friction stir welding , 2010 .

[12]  A. Echeverría,et al.  Mechanical and Microstructural Properties of FSW Lap Joints , 2013 .

[13]  Alvin M. Strauss,et al.  Robotic friction stir welding , 2004, Ind. Robot.

[14]  X. Li,et al.  Effect of tool geometry and process condition on static strength of a magnesium friction stir lap linear weld , 2011 .

[15]  Antonino Squillace,et al.  On the Critical Technological Issues of Friction Stir Welding T-Joints of Dissimilar Aluminum Alloys , 2012, Journal of Materials Engineering and Performance.

[16]  David H. Lammlein,et al.  The application of shoulderless conical tools in friction stir welding: An experimental and theoretical study , 2009 .

[17]  A. Squillace,et al.  2198 Al―Li plates joined by Friction Stir Welding: Mechanical and microstructural behavior , 2009 .

[18]  A. De,et al.  Durability Maps for Friction Stir Welding of an Aluminum Alloy , 2012 .

[19]  Alvin M. Strauss,et al.  Automatic seam-tracking of friction stir welded T-joints , 2009 .

[20]  Neil A. Duffie,et al.  Toward Automation of Friction Stir Welding Through Temperature Measurement and Closed-Loop Control , 2011 .

[21]  E. D. Nicholas,et al.  Feasibility of friction stir welding steel , 1999 .

[22]  Zhihan Zhang,et al.  Effect of Rotation Speed to Welding Speed Ratio on Microstructure and Mechanical Behavior of Friction Stir Welded Aluminum–Lithium Alloy Joints , 2013 .

[23]  Alvin M. Strauss,et al.  The Identification of the Key Enablers for Force Control of Robotic Friction Stir Welding , 2011 .

[24]  Mel Schwartz.  Innovations in Materials Manufacturing, Fabrication, and Environmental Safety , 2010 .

[25]  A. Scialpi,et al.  Influence of shoulder geometry on microstructure and mechanical properties of friction stir welded 6082 aluminium alloy , 2007 .

[26]  Arthur C. Nunes,et al.  Interfacial sticking and slipping in the friction stir welding process , 2006 .

[27]  Alvin M. Strauss,et al.  Controlling robotic friction stir welding , 2003 .

[28]  John Liu,et al.  Advanced Aluminium and Hybrid Aerostructures for Future Aircraft , 2006 .

[29]  V. Balasubramanian,et al.  Influences of tool pin profile and tool shoulder diameter on the formation of friction stir processing zone in AA6061 aluminium alloy , 2008 .

[30]  Alvin M. Strauss,et al.  Seam-Tracking for Friction Stir Welded Lap Joints , 2010 .

[31]  C. Kang,et al.  Dissimilar Friction Stir Welding of Aluminum Alloys , 2009 .

[32]  弗朗克·帕尔姆.  Laser supported friction stir welding method , 2001 .

[33]  Alvin M. Strauss,et al.  Experimental defect analysis and force prediction simulation of high weld pitch friction stir welding , 2006 .

[35]  Gunnar Bolmsjö,et al.  Investigation of path compensation methods for robotic friction stir welding , 2012, Ind. Robot.

[36]  Anthony P. Reynolds,et al.  Visualisation of material flow in autogenous friction stir welds , 2000 .

[37]  Radovan Kovacevic,et al.  Numerical and Experimental Investigations on the Loads Carried by the Tool During Friction Stir Welding , 2009, Journal of Materials Engineering and Performance.

[38]  Antonino Squillace,et al.  Friction stir welding of AA2198-T3 butt joints for aeronautical applications , 2010 .

[39]  R. Nandan,et al.  Dimensionless correlation to estimate peak temperature during friction stir welding , 2006 .

[40]  W. M. Thomas,et al.  Friction Stir Welding - Process Developments and Variant Techniques , 2005 .

[41]  P. Koseeyaporn,et al.  Adaptive voltage control in fusion arc welding , 1999, Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370).

[42]  Phil E. Irving,et al.  Residual Stress Effects and Fatigue Behavior of Friction-Stir-Welded 2198-T8 Al-Li Alloy Joints , 2011 .

[43]  H. Bhadeshia,et al.  Recent advances in friction-stir welding : Process, weldment structure and properties , 2008 .

[44]  Constantinos Soutis,et al.  Recent developments in advanced aircraft aluminium alloys , 2014 .

[45]  Antonino Squillace,et al.  Mechanical response of 2024-7075 aluminium alloys joined by Friction Stir Welding , 2005 .

[46]  A. C. Nunes,et al.  The Influence of Friction Stir Weld Tool Form and Welding Parameters on Weld Structure and Properties: Nugget Bulge in Self-Reacting Friction Stir Welds , 2010 .

[47]  Lawrence E Murr,et al.  Characterization of tool wear and weld optimization in the friction-stir welding of cast aluminum 359+20% SiC metal-matrix composite , 2004 .

[48]  L. Fratini,et al.  Friction stir welding of lap joints: Influence of process parameters on the metallurgical and mechanical properties , 2009 .

[49]  Alvin M. Strauss,et al.  Modelling of friction stir welding for robotic implementation , 2006, Int. J. Model. Identif. Control..

[50]  Pasquale Buonadonna,et al.  Friction-stir welding of AA 2198 butt joints: mechanical characterization of the process and of the welds through DOE analysis , 2011 .

[51]  Xin Lin,et al.  Periodic variation of torque and its relations to interfacial sticking and slipping during friction stir welding , 2012 .

[52]  Y. H. Zhao,et al.  Influence of pin geometry on material flow in friction stir welding process , 2006 .

[53]  Kenneth Doering.  Fatigue of friction stir welded lap joints with sealants , 2009 .

[54]  A. Izenman.  Linear Discriminant Analysis , 2013 .

[55]  R. Miranda,et al.  Process Developments and Materials Characterization in FSW/P , 2022 .

[56]  G. Grant,et al.  Effect of Tool Feature on the Joint Strength of Dissimilar Friction Stir Lap Welds , 2011 .

[57]  William J. Arbegast,et al.  A flow-partitioned deformation zone model for defect formation during friction stir welding , 2008 .

[58]  Naoki Yamamoto,et al.  On Pre-heating Effect for Friction Stir Welding of Aluminum Alloy , 2006 .

[59]  Michael A. Sutton,et al.  Banded Microstructure in AA2024-T351 and AA2524-T351 Aluminum Friction Stir Welds: Part I. Metallurgical Studies , 2004 .

[60]  R. Rioja,et al.  The Evolution of Al-Li Base Products for Aerospace and Space Applications , 2012, Metallurgical and Materials Transactions A.

[61]  M. N. James,et al.  Friction stir weld process evaluation by multi-axial transducer , 2008 .

[62]  Antonino Squillace,et al.  Mechanical and microstructural behaviour of 2024–7075 aluminium alloy sheets joined by friction stir welding , 2006 .

[63]  J. Defalco,et al.  Friction stir welding vs. fusion welding , 2006 .

[64]  Arthur G.O. Mutambara,et al.  Design and analysis of control systems , 1999 .

[65]  Carolyn Russell,et al.  A Decade of Friction Stir Welding R and D at NASA's Marshall Space Flight Center and a Glance into the Future , 2006 .

[66]  Antonette M. Logar,et al.  The use of neural network and discrete Fourier transform for real-time evaluation of friction stir welding , 2011, Appl. Soft Comput..

[67]  Alvin M. Strauss,et al.  Heated Friction Stir Welding: An Experimental and Theoretical Investigation into How Preheating Influences Process Forces , 2010 .

[68]  Jeremy Micah Brown.  The effects of sealants and surface treatments on the faying surface of swept friction stir spot welds , 2008 .

[69]  V. Balasubramanian,et al.  Effect of pulsed current welding on mechanical properties of high strength aluminum alloy , 2008 .

[70]  G. Eggeler,et al.  Where Does the Lithium Go? – A Study of the Precipitates in the Stir Zone of a Friction Stir Weld in a Li‐containing 2xxx Series Al Alloy , 2010 .

[71]  P. L. Threadgill,et al.  Terminology in friction stir welding , 2007 .

[72]  David H. Lammlein.  Friction stir welding of spheres, cylinders, and T-joints: Design, experiment, modelling, and analysis , 2010 .

[73]  Michael McCoy,et al.  Analysis of Tool Feedback Forces and Material Flow during Friction Stir Welding , 2013 .

[74]  B. B. Grimmett,et al.  Friction stir welding studies on mild steel , 2003 .

[75]  Alexander Von Strombeck,et al.  Friction stir welding of an AA6061/Al2O3/20p reinforced alloy , 2006 .

[77]  Christopher B. Smith,et al.  Robotic Friction Stir Welding using a Standard Industrial Robot , 2002 .

[78]  Lawrence E Murr,et al.  Tool Forces Developed During Friction Stir Welding , 2013 .

[79]  Joseph Querin.  Deconvoluting the link between weld tool geometry and process parameters , 2010 .

[80]  Matthew T. Bement,et al.  In‐process gap detection in friction stir welding , 2008 .

[81]  P. Wanjara,et al.  Review of tools for friction stir welding and processing , 2012 .

[82]  W. Thomas,et al.  Friction Stir Welding – Recent Developments in Tool and Process Technologies , 2003 .

[83]  H. Schmidt,et al.  A local model for the thermomechanical conditions in friction stir welding , 2004 .

[84]  William Russell Longhurst.  Force control of friction stir welding , 2009 .

[85]  Ann F. Whitaker,et al.  Wiping Metal Transfer in Friction Stir Welding , 2001 .

[86]  Z. Ma,et al.  Influence of Tool Dimension and Welding Parameters on Microstructure and Mechanical Properties of Friction-Stir-Welded 6061-T651 Aluminum Alloy , 2008 .

[87]  I. Kalaykov,et al.  Generation of continuous tool paths based on CAD models for Friction Stir Welding in 3D , 2007, 2007 Mediterranean Conference on Control & Automation.

[88]  John J. Craig,et al.  Introduction to Robotics Mechanics and Control , 1986 .

[89]  W. M. Thomas,et al.  Friction Stir Welding Tools and Developments , 2003 .

[90]  H. Bhadeshia,et al.  Review: Friction stir welding tools , 2011 .

[91]  R. Cojocaru,et al.  Research on Friction Stir Welding and Tungsten Inert Gas assisted Friction Stir Welding of Copper , 2011 .

[92]  B. Xiao,et al.  Effect of microstructural evolution on mechanical properties of friction stir welded AA2009/SiCp composite , 2008 .

[93]  Chunlei Zhang,et al.  Extremum-Seeking Control and Applications: A Numerical Optimization-Based Approach , 2011 .

[94]  T. Morgeneyer,et al.  Effect of welding defects on plastic behaviour and fatigue lifetime of friction stir welded Al-Cu-Li alloy , 2013 .

[95]  J. Martin,et al.  Novel Techniques for Corner Joints Using Friction Stir Welding , 2011 .

[96]  Brian T. Gibson.  Low-Cost Wireless Force Sensor Design with Applications in Friction Stir Welding , 2012 .

[97]  Kai-Uwe Schröder,et al.  Local postbuckling of hat-stringer-stiffened composite laminated plates under transverse compression , 2010 .

[98]  Paul A. Colegrove,et al.  Model for predicting heat generation and temperature in friction stir welding from the material properties , 2007 .

[99]  Alvin M. Strauss,et al.  Misalignment detection and enabling of seam tracking for friction stir welding , 2009 .

[100]  L. Dubourg,et al.  Process optimisation and mechanical properties of friction stir lap welds of 7075-T6 stringers on 2024-T3 skin , 2010 .

[101]  Alvin M. Strauss,et al.  Investigation of force-controlled friction stir welding for manufacturing and automation , 2010 .

[102]  C. Giummarra,et al.  NEW ALUMINUM LITHIUM ALLOYS FOR AEROSPACE APPLICATIONS , 2007 .

[103]  W. Thomas.  Friction Stir Welding - Recent Developments , 2003 .

[104]  K. Colligan.  Material flow behavior during friction stir welding of aluminum , 1999 .

[105]  T. Prater,et al.  An Investigation into the Friction Stir Welding of Al 6061 and Al 6061/SiC/17.5p using Diamond Coatings , 2008 .

[106]  K. N. Krishnan,et al.  On the formation of onion rings in friction stir welds , 2002 .

[107]  Anthony P. Reynolds,et al.  Factors affecting the properties of friction stir welded aluminum lap joints , 2001 .

[108]  Alvin M. Strauss,et al.  Applied torque control of friction stir welding using motor current as feedback , 2014 .

[109]  Patrick Ulysse,et al.  Three-dimensional modeling of the friction stir-welding process , 2002 .

[110]  Alvin M. Strauss,et al.  Torque control of friction stir welding for manufacturing and automation , 2010 .

[111]  Zhu Ming-han,et al.  Fisher linear discriminant analysis algorithm based on vector muster , 2011 .

[112]  William J. Arbegast,et al.  Friction stir welding after a decade of development , 2006 .

[113]  W. M. Thomas,et al.  Friction Stir Welding – Process Variants and Developments in the Automotive Industry , 2006 .

[114]  Yu E Ma,et al.  Effect of welding parameters on mechanical and fatigue properties of friction stir welded 2198 T8 aluminum–lithium alloy joints , 2013 .

[115]  Pasquale Cavaliere,et al.  Effect of anisotropy on Fatigue properties of AA2198 Al-Li plates joined by Friction Stir Welding , 2009 .

[116]  R. M. Leal,et al.  Material flow in Friction Stir Welding , 2008, Microscopy and Microanalysis.

[117]  Claude Perron,et al.  Simulation of friction stir welding using industrial robots , 2010, Ind. Robot.

[118]  Chase D. Cox,et al.  The friction stir welding of small-diameter pipe: an experimental and numerical proof of concept for automation and manufacturing , 2012 .