Thermal performance of cascaded thermal storage with phase-change materials (PCMs). Part I: Steady cases

Cascaded latent thermal storage can find its applications in renewable thermal energies with time-dependent temperatures. This paper presents thermal performance of cascaded heat storage with unsteady inlet temperature of heat transfer fluid (HTF). The optimization of temperatures of HTF and phase-change materials (PCMs) is performed based on exergy, entropy, and entransy. Corresponding analytical/numerical solutions with these concepts are obtained. The qualifications for existence of optimization solutions are proposed. The optimization result of unsteady case is compared with that of steady case. The fluctuation of HTF temperature is transferred along the HTF flow path. The HTF temperatures in different stages exhibit similar fluctuating trend, but the fluctuating amplitude is diminished along the HTF flow path. With an increase in stage number, the difference between temperatures of outlet HTF and environment is gradually decreased with obviously improved thermal performance. As NTU increases, thermal performance is gradually increased, but with decreased increasing amplitude. The optimization result with entransy is also compared with that of entropy. The optimal exergy efficiency based on entropy is greater than that based on entransy, while the optimal thermal efficiency based on entransy is superior to that based on entropy. The optimization can be applied to select PCMs for unsteady cascaded thermal storage.

[1]  Joel Martinez-Frias,et al.  Optimization of a Class of Latent Thermal Energy Storage Systems With Multiple Phase-Change Materials , 1998 .

[2]  Guangming Chen,et al.  Experimental study on charging processes of a cylindrical heat storage capsule employing multiple‐phase‐change materials , 2001 .

[3]  Wei Wang,et al.  Numerical analysis and parameters optimization of shell-and-tube heat storage unit using three phase change materials , 2013 .

[4]  R. Pitz-Paal,et al.  Cascaded latent heat storage for parabolic trough solar power plants , 2007 .

[5]  Rangan Banerjee,et al.  A review of solar thermochemical processes , 2016 .

[6]  Arun S. Mujumdar,et al.  Application of phase change materials in thermal management of electronics , 2007 .

[7]  A. Bejan.  Advanced Engineering Thermodynamics , 1988 .

[8]  T. L. Bergman,et al.  High temperature latent heat thermal energy storage using heat pipes , 2010 .

[9]  XinGang Liang,et al.  Entransy—A physical quantity describing heat transfer ability , 2007 .

[10]  Zhifeng Wang,et al.  Exergy analysis of two phase change materials storage system for solar thermal power with finite-time thermodynamics , 2012 .

[11]  Ya-Ling He,et al.  Numerical study on thermal energy storage performance of phase change material under non-steady-state inlet boundary , 2011 .

[12]  Zhuo Li,et al.  Analysis of HTFs, PCMs and fins effects on the thermal performance of shell–tube thermal energy storage units , 2015 .

[13]  Changying Zhao,et al.  A review of solar collectors and thermal energy storage in solar thermal applications , 2013 .

[14]  Noel León,et al.  High temperature latent heat thermal energy storage: Phase change materials, design considerations and performance enhancement techniques , 2013 .

[15]  Changying Zhao,et al.  Thermodynamic analysis and optimization of cascaded latent heat storage system for energy efficient utilization , 2015 .

[16]  Luisa F. Cabeza,et al.  Experimental evaluation at pilot plant scale of multiple PCMs (cascaded) vs. single PCM configuration for thermal energy storage , 2015 .

[17]  M. Farid,et al.  Thermal Performance of a Heat Storage Module Using PCM’s With Different Melting Temperature: Experimental , 1990 .

[18]  Gang Li.  Sensible heat thermal storage energy and exergy performance evaluations , 2016 .

[19]  M. Kenisarin.  High-temperature phase change materials for thermal energy storage , 2010 .

[20]  Adrian Bejan,et al.  Method of entropy generation minimization, or modeling and optimization based on combined heat transfer and thermodynamics , 1996 .

[21]  Xinhai Xu,et al.  Heat transfer fluids for concentrating solar power systems – A review , 2015 .

[22]  Changying Zhao,et al.  Thermo-mechanical analysis of ceramic encapsulated phase-change-material (PCM) particles , 2011 .

[23]  S. Himran,et al.  Characterization of Alkanes and Paraffin Waxes for Application as Phase Change Energy Storage Medium , 1994 .

[24]  Nicholas R. Jankowski,et al.  A review of phase change materials for vehicle component thermal buffering , 2014 .

[25]  Yuan Hu,et al.  The influence of expanded graphite on thermal properties for paraffin/high density polyethylene/chlorinated paraffin/antimony trioxide as a flame retardant phase change material , 2010 .

[26]  M. Farid,et al.  Thermal Performance of a Heat Storage Module Using PCM’s With Different Melting Temperatures: Mathematical Modeling , 1989 .

[27]  R. Ruoff,et al.  Enhanced thermal conductivity of phase change materials with ultrathin-graphite foams for thermal energy storage , 2014 .

[28]  Changying Zhao,et al.  Review on microencapsulated phase change materials (MEPCMs): Fabrication, characterization and applications , 2011 .

[29]  Muhammad M. Rahman,et al.  Comparison between the single-PCM and multi-PCM thermal energy storage design , 2014 .

[30]  S. D. Pohekar,et al.  Performance enhancement in latent heat thermal storage system: A review , 2009 .

[31]  Saffa Riffat,et al.  The latest advancements on thermochemical heat storage systems , 2015 .

[32]  Luisa F. Cabeza,et al.  Review on thermal energy storage with phase change: materials, heat transfer analysis and applications , 2003 .

[33]  Changying Zhao,et al.  Thermal and exergetic analysis of Metal Foam-enhanced Cascaded Thermal Energy Storage (MF-CTES) , 2013 .

[34]  Xiaosong Zhang,et al.  Thermal performance of a solar storage packed bed using spherical capsules filled with PCM having different melting points , 2014 .

[35]  C. Majorana,et al.  Thermal storage of sensible heat using concrete modules in solar power plants , 2014 .

[36]  A. Mujumdar,et al.  Thermodynamic optimization of the thermal process in energy storage using multiple phase change materials , 1997 .

[37]  Dan Zhou,et al.  Review on thermal energy storage with phase change materials (PCMs) in building applications , 2012 .

[38]  Guangming Chen,et al.  Study on phase change temperature distributions of composite PCMs in thermal energy storage systems , 1999 .

[39]  Viktoria Martin,et al.  Multistage latent heat cold thermal energy storage design analysis , 2013 .

[40]  Luisa F. Cabeza,et al.  19 – Thermal energy storage (TES) systems using heat from waste , 2015 .

[41]  Yanzhong Li,et al.  Experimental study on liquid/solid phase change for cold energy storage of Liquefied Natural Gas (LNG) refrigerated vehicle , 2010 .

[42]  Francis Agyenim,et al.  A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS) , 2010 .

[43]  R. Seeniraj,et al.  Performance enhancement of a solar dynamic LHTS module having both fins and multiple PCMs , 2008 .

[44]  W. Tao,et al.  Performance optimization of two-stage latent heat storage unit based on entransy theory , 2014 .

[45]  M. Demirbas.  Thermal Energy Storage and Phase Change Materials: An Overview , 2006 .

[46]  Marc A. Rosen,et al.  Thermal performance of a multiple PCM thermal storage unit for free cooling , 2013 .

[47]  G. Sacchi.  Lagrange Multiplier Methods for Optimization with Constraints , 1985 .

[48]  Seyed Ali Ghoreishi-Madiseh,et al.  Study of effective solar energy storage using a double pipe geothermal heat exchanger , 2016 .

[49]  Liu Jing,et al.  Liquid metal cooling in thermal management of computer chips , 2007 .

[50]  Adrian Bejan,et al.  Thermodynamic Optimization of Phase-Change Energy Storage Using Two or More Materials , 1992 .

[51]  Haisheng Chen,et al.  Progress in electrical energy storage system: A critical review , 2009 .

[52]  Changying Zhao,et al.  Thermal efficiency analysis of the cascaded latent heat/cold storage with multi-stage heat engine model , 2016 .

[53]  E. Halawa,et al.  Thermal performance analysis of a phase change thermal storage unit for space heating , 2011 .