Cu(II) and Zn(II) based phthalocyanines as hole selective layers for perovskite solar cells

Recently, significant progress has been achieved in the fabrication of highly efficient perovskite solar cells, while major challenges, such as the commercial viability of exotic materials and their instability, remain an obstacle. Hole transporting materials (HTMs) represent a tricky choice for the fabrication of efficient solar cells and cost ineffective Spiro-OMeTAD continues to be so far the most obvious candidate. Organometallic complexes, such as phthalocyanine metal complexes, appeared as a promising class of p-type material, since they are less expensive and more stable. Herein, we report the synthesis of a novel Cu(II)-based phthalocyanine [(tOctPhO)8CuPc 1] with 4-tert-octylphenoxy-substituted functional groups that possesses a very good solubility in a wide range of organic solvents, and thus can be applied using solution processing in a wide range of electro-optical devices. In the present work (tOctPhO)8CuPc 1 and its analogous Zn(II) phthalocyanine [represented as (tOctPhO)8ZnPc 2] were tested in mixed perovskites (FAPbBr3)0.85(MAPbI3)0.15 for the fabrication of perovskite solar cells. These phthalocyanine based HTMs exhibited competitive power conversion efficiencies and demonstrated superior stability when compared to classical HTMs.

[1]  M. Deepa,et al.  Cesium power: low Cs+ levels impart stability to perovskite solar cells. , 2017, Physical chemistry chemical physics : PCCP.

[2]  R. Berger,et al.  Influence of the mixed organic cation ratio in lead iodide based perovskite on the performance of solar cells. , 2016, Physical chemistry chemical physics : PCCP.

[3]  M. Ozaki,et al.  Efficiency enhancement in perovskite solar cell utilizing solution-processable phthalocyanine hole transport layer with thermal annealing , 2017 .

[4]  Amador Pérez-Tomás,et al.  Performance and stability of mixed FAPbI3(0.85)MAPbBr3(0.15) halide perovskite solar cells under outdoor conditions and the effect of low light irradiation , 2016 .

[5]  Mohammad Khaja Nazeeruddin,et al.  Perovskite as light harvester: a game changer in photovoltaics. , 2014, Angewandte Chemie.

[6]  Michael Grätzel,et al.  Nanostructured TiO2/CH3NH3PbI3 heterojunction solar cells employing spiro-OMeTAD/Co-complex as hole-transporting material , 2013 .

[7]  Tsutomu Miyasaka,et al.  Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. , 2009, Journal of the American Chemical Society.

[8]  Peng Gao,et al.  Efficient luminescent solar cells based on tailored mixed-cation perovskites , 2016, Science Advances.

[9]  M. Grätzel,et al.  An efficient perovskite solar cell with symmetrical Zn(ii) phthalocyanine infiltrated buffering porous Al2O3 as the hybrid interfacial hole-transporting layer. , 2016, Physical chemistry chemical physics : PCCP.

[10]  Fei Zhang,et al.  A novel asymmetric phthalocyanine-based hole transporting material for perovskite solar cells with an open-circuit voltage above 1.0 V , 2016 .

[11]  M. Nazeeruddin,et al.  Molecularly Engineered Phthalocyanines as Hole‐Transporting Materials in Perovskite Solar Cells Reaching Power Conversion Efficiency of 17.5% , 2017 .

[12]  Licheng Sun,et al.  Recent Progress on Hole‐Transporting Materials for Emerging Organometal Halide Perovskite Solar Cells , 2015 .

[13]  H. Shan,et al.  Tetra-alkyl-substituted copper (II) phthalocyanines as dopant-free hole-transport layers for planar perovskite solar cells with enhanced open circuit voltage and stability , 2017 .

[14]  Y. Murata,et al.  Hole-Transporting Materials with a Two-Dimensionally Expanded π-System around an Azulene Core for Efficient Perovskite Solar Cells. , 2015, Journal of the American Chemical Society.

[15]  V. Jankauskas,et al.  Carbazole-based enamine: Low-cost and efficient hole transporting material for perovskite solar cells , 2017 .

[16]  Peng Gao,et al.  Facile synthesized organic hole transporting material for perovskite solar cell with efficiency of 19.8 , 2016 .

[17]  Peng Gao,et al.  A molecularly engineered hole-transporting material for efficient perovskite solar cells , 2016, Nature Energy.

[18]  Licheng Sun,et al.  Interfacial Engineering of Perovskite Solar Cells by Employing a Hydrophobic Copper Phthalocyanine Derivative as Hole-Transporting Material with Improved Performance and Stability. , 2017, ChemSusChem.

[19]  M. Grätzel,et al.  Hole-Transport Materials for Perovskite Solar Cells. , 2016, Angewandte Chemie.

[20]  H. Shan,et al.  A facile molecularly engineered copper (II) phthalocyanine as hole transport material for planar perovskite solar cells with enhanced performance and stability , 2017 .

[21]  G. Vitiello,et al.  Protic ionic liquids as p-dopant for organic hole transporting materials and their application in high efficiency hybrid solar cells. , 2013, Journal of the American Chemical Society.

[22]  Zongxiang Xu,et al.  Introduction of Graphene Oxide as Buffer Layer in Perovskite Solar Cells and the Promotion of Soluble n-Butyl-substituted Copper Phthalocyanine as Efficient Hole Transporting Material , 2017 .

[23]  P. Heremans,et al.  Dopant-Free Hole-Transporting Material with a C3h Symmetrical Truxene Core for Highly Efficient Perovskite Solar Cells. , 2016, Journal of the American Chemical Society.

[24]  K. Ohkubo,et al.  Supramolecular zinc phthalocyanine-imidazolyl perylenediimide dyad and triad: synthesis, complexation, and photophysical studies. , 2011, Chemistry, an Asian journal.

[25]  J. Teuscher,et al.  Lithium salts as "redox active" p-type dopants for organic semiconductors and their impact in solid-state dye-sensitized solar cells. , 2013, Physical chemistry chemical physics : PCCP.