Active liquid degassing in microfluidic systems.

We present a method for efficient air bubble removal in microfluidic applications. Air bubbles are extracted from a liquid chamber into a vacuum chamber through a semipermeable membrane, consisting of PDMS coated with amorphous Teflon(®) AF 1600. Whereas air is efficiently extracted through the membrane, water loss is greatly reduced by the Teflon even at elevated temperatures. We present the water loss and permeability change with the amount of added Teflon AF to the membrane. Also, we demonstrate bubble-free, multiplex DNA amplification using PCR in a PDMS microfluidic device.

[1]  Jong Hwan Sung,et al.  Prevention of air bubble formation in a microfluidic perfusion cell culture system using a microscale bubble trap , 2009, Biomedical microdevices.

[2]  Yuzuru Takamura,et al.  Circumventing air bubbles in microfluidic systems and quantitative continuous-flow PCR applications , 2006, Analytical and bioanalytical chemistry.

[3]  R. Zengerle,et al.  Self-regulating passive fuel supply for small direct methanol fuel cells operating in all orientations , 2009 .

[4]  Joel Voldman,et al.  An active bubble trap and debubbler for microfluidic systems. , 2008, Lab on a chip.

[5]  R. Maxwell,et al.  Thermodynamic study on dynamic water vapor sorption in Sylgard-184. , 2012, The journal of physical chemistry. B.

[6]  Xiaoshan Zhu,et al.  Micro/nanoporous membrane based gas–water separation in microchannel , 2009 .

[7]  Chang-Jin Kim,et al.  A degassing plate with hydrophobic bubble capture and distributed venting for microfluidic devices , 2006 .

[8]  Jie Xu,et al.  Use of a porous membrane for gas bubble removal in microfluidic channels: physical mechanisms and design criteria , 2010, 1005.0107.

[9]  Joo H. Kang,et al.  Analysis of pressure-driven air bubble elimination in a microfluidic device. , 2008, Lab on a chip.

[10]  Axel Günther,et al.  Bubbles no more: in-plane trapping and removal of bubbles in microfluidic devices. , 2012, Lab on a chip.

[11]  Dong-Chul Han,et al.  PDMS-based micro PCR chip with Parylene coating , 2003 .

[12]  Ryutaro Maeda,et al.  A prototype of ultrasonic micro-degassing device for portable dialysis system , 2002 .

[13]  Hai-Qing Gong,et al.  Micro air bubble formation and its control during polymerase chain reaction (PCR) in polydimethylsiloxane (PDMS) microreactors , 2007, Journal of Micromechanics and Microengineering.

[14]  W. Koros,et al.  Carbon composite membranes: A solution to adverse humidity effects , 1995 .

[15]  Feng-Ming Chang,et al.  Tiny bubble removal by gas flow through porous superhydrophobic surfaces: Ostwald ripening , 2008 .

[16]  Y. Lo,et al.  Optofluidic Waveguides in Teflon AF-Coated PDMS Microfluidic Channels , 2009, IEEE Photonics Technology Letters.

[17]  Bill Bynum,et al.  Lancet , 2015, The Lancet.

[18]  Bruce K. Gale,et al.  Bubble inclusion and removal using PDMS membrane-based gas permeation for applications in pumping, valving and mixing in microfluidic devices , 2009 .

[19]  Haim H Bau,et al.  A membrane-based, high-efficiency, microfluidic debubbler. , 2011, Lab on a chip.

[20]  Xingyu Jiang,et al.  A simple PDMS-based microfluidic channel design that removes bubbles for long-term on-chip culture of mammalian cells. , 2010, Lab on a chip.

[21]  H. Piiparinen,et al.  Rapid identification of bacterial pathogens using a PCR- and microarray-based assay , 2009, BMC Microbiology.

[22]  S. Quake,et al.  Monolithic microfabricated valves and pumps by multilayer soft lithography. , 2000, Science.

[23]  Bruce K. Gale,et al.  A PDMS-based gas permeation pump for on-chip fluid handling in microfluidic devices , 2006 .

[24]  Won Mook Choi,et al.  A soft-imprint technique for direct fabrication of submicron scale patterns using a surface-modified PDMS mold , 2003 .

[25]  S. Morishita,et al.  Improved fuel use efficiency in microchannel direct methanol fuel cells using a hydrophilic macroporous layer , 2009 .

[26]  Shu Yang,et al.  Self-Actuated, Thermo-Responsive Hydrogel Valves for Lab on a Chip , 2005, Biomedical microdevices.

[27]  M. Tokeshi,et al.  Surface modification method of microchannels for gas-liquid two-phase flow in microchips. , 2005, Analytical chemistry.

[28]  Patrick M. Pilarski,et al.  Small volume PCR in PDMS biochips with integrated fluid control and vapour barrier , 2006 .

[29]  B. Freeman,et al.  Transport of Gases and Vapors in Glassy and Rubbery Polymers , 2006 .