Influence of residual gases on cathode spot behavior

A residual gas in a vacuum arc chamber influences the behavior of the arc by two effects: it changes the state of the cathode surface, in particular the surface cleanness, and it influences the interelectrode plasma. Experiments are summarized dealing with the influence of the residual gas on the arc parameters in a pressure range of 10/sup -6/-10/sup -5/ Pa. With increasing pressure, general tendencies are a decrease in the fluctuations of the burning voltage, in the chopping current, and in the current density, and an increase in the arc lifetime, spot velocity, and spot diameter. The conditions at the cathode surface are decisive for the spot behavior and not the pressure. Surface contaminations render the arc more stable. The transition between the so-called cathode spot type 1 (on contaminated surfaces) and type 2 (on clean surfaces) was found to be smooth rather than abrupt. >

[1]  P. D. Swift,et al.  Cathode spot phenomena in titanium vacuum arcs , 1989 .

[2]  R.P.P. Smeets,et al.  The origin of current chopping in vacuum arcs , 1989 .

[3]  J. Meunier,et al.  Experimental Study of the Effect of Gas Pressure on Arc Cathode Erosion and Redeposition in He, Ar, and SF6 from Vacuum to Atmospheric Pressure , 1987, IEEE Transactions on Plasma Science.

[4]  B. Juttner.  On the plasma density of metal vapour arcs , 1985 .

[5]  J. Halbritter,et al.  On Contamination on Electrode Surfaces and Electric Field Limitations , 1985, IEEE Transactions on Electrical Insulation.

[6]  L. Pietronero,et al.  Stochastic model for dielectric breakdown , 1984 .

[7]  S. Anders,et al.  On the current density at the cathode of vacuum arcs , 1984 .

[8]  L. Pietronero,et al.  Fractal Dimension of Dielectric Breakdown , 1984 .

[9]  Benoit B. Mandelbrot,et al.  Fractal Geometry of Nature , 1984 .

[10]  B. Juttner,et al.  On the random walk of arc cathode spots in vacuum , 1983 .

[11]  J E Daalder,et al.  Random walk of cathode arc spots in vacuum , 1983 .

[12]  C. Kimblin,et al.  Experimental observations of cathode‐spot surface phenomena in the transition from a vacuum metal‐vapor arc to a nitrogen arc , 1982 .

[13]  M. Drouet.  The Physics of the Retrograde Motion of the Electric Arc , 1981, IEEE Transactions on Plasma Science.

[14]  A. E. Robson.  The motion of a low-pressure arc in a strong magnetic field , 1978 .

[15]  A. Guile,et al.  The erosion of copper cathodes from vacuum to atmospheric‐pressure arcs , 1978 .

[16]  R. Hurley,et al.  Vacuum breakdown from electroluminescent impurities on metallic cathode surfaces , 1978 .

[17]  P. R. Emtage.  Interaction of the cathode spot with low pressures of ambient gas , 1975 .

[18]  W. Reif,et al.  Einfluß von umgebungsdruck und elektrodenabstand auf den abreißstrom des vakuumbogens , 1975 .

[19]  C. Kimblin.  Cathode spot erosion and ionization phenomena in the transition from vacuum to atmospheric pressure arcs , 1974 .

[20]  J. Daalder.  Diameter and Current Density of Single and Multiple Cathode Discharges in Vacuum , 1974 .

[21]  B. Djakov,et al.  Cathode spot structure and dynamics in low-current vacuum arcs , 1974 .

[22]  D. Murphree,et al.  Arc motion reversal in crossed electric and magnetic fields in an argon atomosphere from 200 to 900 Torr , 1973 .

[23]  N. P. Kozlov,et al.  Cathode Processes in Electric Arcs. I. , 1972 .

[24]  L. Sena.  Fission of the Cathode Spot of a Low-Pressure Arc , 1971 .

[25]  A. E. Robson,et al.  Motion of a Short Arc in a Magnetic Field , 1956 .

[26]  N. Vogel.  Burning voltage in atmospheric and vacuum short arcs of vanishing length , 1989 .

[27]  S. Anders,et al.  Arc cathode processes in the transition region between vacuum arcs and gaseous arcs , 1987 .

[28]  P. Siemroth,et al.  Investigations of the Current Density in the Cathode Spot of a Vacuum Arc , 1985 .

[29]  G. Härtler,et al.  Statistische Methode für die Zuverlässigkeitsanalyse , 1983 .

[30]  R. V. Latham,et al.  High voltage vacuum insulation: the physical basis , 1981 .

[31]  Yu. Yankelevitch.  The thin film metal-insulator-metal system used as a non-heated source of electrons , 1980 .

[32]  B. Juttner,et al.  Erosion Craters and Arc Cathode Spots in Vacuum , 1979 .

[33]  H. Pursch,et al.  On the nature and the motion of arc cathode spots in UHV , 1979 .

[34]  B. Jüttner,et al.  Über die Lebensdauer von elektrischen Gleichstrombögen im Ultrahochvakuum , 1975 .

[35]  G. Ecker.  Das Chopping‐Phänomen , 1974 .

[36]  A. Eberhagen.  Die Änderung der Austrittsarbeit von Metallen durch eine Gasadsorption , 1960 .