Passive heat transfer enhancement review in corrugation

The heat transfer is a very interesting field for economical, functional and environmental reasons; it is almost related to each aspect of human lives. Therefor, the enhancement of such field is quite essential. Passive heat transfer represents is the soul of heat transfer enhancement due to the merits of simplicity, cheap and good enhancement with acceptable pressure drop. Corrugation is a method involved within the passive techniques of enhancement, it is important and being adopted in a wide range of applications like a nuclear reactor cooling, refrigeration, heat exchangers, and other industrial applications. The current article presents an extensive review of numerical and experimental studies on heat transfer enhancement, which covers the laminar and turbulent flow regions in the corrugations, especially in corrugated tubes. This paper dealt with 95.74% of papers published in corrugated tubes for different applications to offer one article representing a database stop for the designers and authors whom concerning and dealing with heat transfer enhancement in corrugated tubes.

[1]  Soo Whan Ahn,et al.  Experimental studies on heat transfer in the annuli with corrugated inner tubes , 2003 .

[2]  Chong-fang Ma,et al.  Experimental investigation on enhanced heat transfer in transversally corrugated tube with molten salt , 2013 .

[3]  Huaizhi Han,et al.  RST model for turbulent flow and heat transfer mechanism in an outward convex corrugated tube , 2014 .

[4]  Rahman Saidur,et al.  Prediction of heat transfer performance of CuO/water nanofluids flow in spirally corrugated helically coiled heat exchanger using fuzzy logic technique , 2014 .

[5]  Kiyoshi Saito,et al.  Heat transfer and pressure drop characteristics of enhanced titanium tubes , 2003 .

[6]  P. G. Vicente,et al.  Experimental investigation on heat transfer and frictional characteristics of spirally corrugated tubes in turbulent flow at different Prandtl numbers , 2004 .

[7]  S. Wongwises,et al.  Evaporation heat transfer and friction characteristics of R-134a flowing downward in a vertical corrugated tube , 2011 .

[8]  Josua P. Meyer,et al.  In-tube passive heat transfer enhancement in the process industry , 2006 .

[9]  Huixiong Li,et al.  Pressure drop, heat transfer and performance of single-phase turbulent flow in spirally corrugated tubes , 2001 .

[10]  M. Jaafar,et al.  Heat transfer enhancement in spirally corrugated tube , 2014 .

[11]  Fabio Bozzoli,et al.  Compound convective heat transfer enhancement in helically coiled wall corrugated tubes , 2013 .

[12]  J. San,et al.  Heat transfer enhancement of transverse ribs in circular tubes with consideration of entrance effect , 2006 .

[13]  V. Zimparov,et al.  Prediction of friction factors and heat transfer coefficients for turbulent flow in corrugated tubes combined with twisted tape inserts. Part 1: friction factors , 2004 .

[14]  V. Zimparov,et al.  Enhancement of heat transfer by a combination of three-start spirally corrugated tubes with a twisted tape , 2001 .

[15]  S. Garimella,et al.  Performance Evaluation of Spirally Fluted Annuli: Geometry and Flow Regime Effects , 1997 .

[16]  S. Garimella,et al.  Experimental investigation of heat transfer and pressure drop characteristics of annuli with spirally-fluted inner tubes / , 1990 .

[17]  Shuli Liu,et al.  A comprehensive review on passive heat transfer enhancements in pipe exchangers , 2013 .

[18]  Jianhua Wu,et al.  Fluid Flow and Heat Transfer Characteristics in Helical Tubes Cooperating with Spiral Corrugation , 2012 .

[19]  Sara Rainieri,et al.  Convective heat transfer to temperature dependent property fluids in the entry region of corrugated tubes , 2002 .

[20]  S. Saha.  Thermohydraulics of laminar flow of viscous oil through a circular tube having axial corrugations and fitted with centre-cleared twisted-tape , 2012 .

[21]  M. Farhadi,et al.  Experimental investigation of convective heat transfer and friction factor of Al2o3/water nanofluid in helically corrugated tube , 2014 .

[22]  A. S. Dalkılıç,et al.  Classification of in-tube boiling R134a data belonging to the smooth and corrugated tubes☆ , 2014 .

[23]  A. S. Dalkılıç,et al.  Correlations for evaporation heat transfer coefficient and two-phase friction factor for R-134a flowing through horizontal corrugated tubes☆ , 2011 .

[24]  Chuen-Sen Lin,et al.  Numerical study of an exhaust heat recovery system using corrugated tube heat exchanger with twisted tape inserts , 2014 .

[25]  J. Fernández-Seara,et al.  Heat transfer and friction characteristics of spirally corrugated tubes for outer ammonia condensation. , 2012 .

[26]  Energy losses and heat transfer enhancement in transversally corrugated pipes , 2011 .

[27]  S. Wongwises,et al.  Condensation heat transfer and flow characteristics of R-134a flowing through corrugated tubes , 2011 .

[28]  Ali Habibi Khalaj,et al.  Heat Transfer Coefficient and Friction Factor Prediction of Corrugated Tubes Combined With Twisted Tape Inserts Using Artificial Neural Network , 2010 .

[29]  V. Zimparov,et al.  Heat transfer and friction characteristics of spirally corrugated tubes for power plant condensers—2. A mixing-length model for predicting fluid friction and heat transfer , 1991 .

[30]  Ya-Ling He,et al.  Experimental study on friction factor and numerical simulation on flow and heat transfer in an alternating elliptical axis tube , 2006 .

[31]  Wei Liu,et al.  3D numerical study on shell side heat transfer and flow characteristics of rod-baffle heat exchangers with spirally corrugated tubes , 2015 .

[32]  Smith Eiamsa-ard,et al.  Heat transfer enhancement by using CuO/water nanofluid in corrugated tube equipped with twisted tape ☆ , 2012 .

[33]  V. Zimparov.  Prediction of friction factors and heat transfer coefficients for turbulent flow in corrugated tubes combined with twisted tape inserts. Part 2: heat transfer coefficients , 2004 .

[34]  A. Bergles,et al.  Heat Transfer and Pressure Drop Characteristics of Flow Boiling in a Horizontal Deep Spirally Fluted Tube , 1997 .

[35]  Wenjing Zhou,et al.  NUMERICAL SIMULATION AND OPTIMIZATION OF CONVECTIVE HEAT TRANSFER AND PRESSURE DROP IN CORRUGATED TUBES , 2012 .

[36]  Sujoy Kumar Saha,et al.  Thermohydraulics of turbulent flow through rectangular and square ducts with axial corrugation roughness and twisted-tapes with and without oblique teeth , 2010 .

[37]  S. Saha.  THERMOHYDRAULICS OF LAMINAR FLOW THROUGH A CIRCULAR TUBE HAVING INTEGRAL HELICAL CORRUGATIONS AND FITTED WITH HELICAL SCREW-TAPE INSERT , 2013 .

[38]  Yong Tae Kang,et al.  The effects of inclination angle on flooding in a helically fluted tube with a twisted insert , 1997 .

[39]  Ahmad Saboonchi,et al.  Experimental study of condensation heat transfer of R-134a flow in corrugated tubes with different inclinations , 2012 .

[40]  R. Armstrong,et al.  Calculations of viscoelastic flow through an axisymmetric corrugated tube using the explicitly elliptic momentum equation formulation (EEME) , 1989 .

[41]  P. G. Vicente,et al.  The influence of artificial roughness shape on heat transfer enhancement: Corrugated tubes, dimpled tubes and wire coils , 2012 .

[42]  Richard C. Scrannage,et al.  Scoping assessment of design characteristics for an enhanced calandria tube , 2011 .

[43]  A. Zachár,et al.  Analysis of coiled-tube heat exchangers to improve heat transfer rate with spirally corrugated wall , 2010 .

[44]  Hao Peng,et al.  Analysis on flow and heat transfer characteristics of EGR helical baffled cooler with spiral corrugated tubes , 2013 .

[45]  A. S. Dalkılıç,et al.  Intensive literature review of condensation inside smooth and enhanced tubes , 2009 .

[46]  P. G. Vicente,et al.  MIXED CONVECTION HEAT TRANSFER AND ISOTHERMAL PRESSURE DROP IN CORRUGATED TUBES FOR LAMINAR AND TRANSITION FLOW , 2004 .

[47]  K. Mimura,et al.  Heat transfer and pressure drop of corrugated tubes , 1977 .

[48]  S. Medved,et al.  An experimental heat-transfer study for a heat-recovery unit made of corrugated tubes , 2013 .

[49]  S. Saha.  Thermohydraulics of Laminar Flow Through Rectangular and Square Ducts With Axial Corrugation Roughness and Twisted Tapes With Oblique Teeth , 2010 .

[50]  Huaizhi Han,et al.  Numerical study of flow and heat transfer characteristics in outward convex corrugated tubes , 2012 .

[51]  G. P. Greyvenstein,et al.  Detailed Simulation of Fluted Tube Water Heating Condensers , 2003 .

[52]  Pongjet Promvonge,et al.  Turbulent heat transfer enhancement in a heat exchanger using helically corrugated tube , 2011 .

[53]  Fabio Bozzoli,et al.  Experimental investigation on the convective heat transfer in straight and coiled corrugated tubes for highly viscous fluids: Preliminary results , 2012 .

[54]  T. Galal,et al.  Enhanced tubing thermal performance for innovative MSF system , 2011 .

[55]  Marco Spiga,et al.  HEAT TRANSFER ENHANCEMENT IN A CORRUGATED TUBE , 2002 .

[56]  A. Trifirò,et al.  Heat treatment of fluid foods in a shell and tube heat exchanger: Comparison between smooth and helically corrugated wall tubes , 2007 .

[57]  A. Dellil.  Numerical Simulation of a Spiral Wall , 2013 .

[58]  Anil Kumar Patil,et al.  Thermo-hydraulic performance of a heat exchanger tube with discrete corrugations , 2014 .

[59]  N. Gopalan,et al.  Investigation on laminar flow of a suspension in corrugated straight tubes , 1992 .

[60]  Ralph L. Webb,et al.  Heat transfer and friction characteristics of internal helical-rib roughness , 2000 .

[61]  The flow of power-law fluids in axisymmetric corrugated tubes , 2010, 1006.2521.

[62]  O. Mahian,et al.  Heat transfer and single-phase flow in internally grooved tubes☆ , 2013 .

[63]  Mousa Farhadi,et al.  Turbulent heat transfer of Al2O3–water nanofluid inside helically corrugated tubes: Numerical study , 2013 .

[64]  Lixian Zhuang,et al.  Heat transfer characteristics of carbon steel spirally fluted tube for high pressure preheaters , 2000 .

[65]  J. Cieśliński,et al.  Evaporation of R407C/oil mixtures inside corrugated and micro-fin tubes , 2007 .

[66]  A. S. Dalkılıç,et al.  Neural Network Based Analyses for the Determination of Evaporation Heat Transfer Characteristics During Downward Flow of R134a Inside a Vertical Smooth and Corrugated Tube , 2014 .

[67]  J. L. Zakin,et al.  Enhanced heat transfer of drag reducing surfactant solutions with fluted tube-in-tube heat exchanger , 2001 .

[68]  A. Michalak,et al.  Friction factor for transient flow in transverse corrugated pipes , 2013 .

[69]  S. Nguang,et al.  Characterization of the Effect of Corrugation Angles on Hydrodynamic and Heat Transfer Performance of Four-Start Spiral Tubes , 2001 .

[70]  XinGang Liang,et al.  Experimental study on convective heat transfer in alternating elliptical axis tubes , 2005 .

[71]  R. Christensen,et al.  Experimental investigation of heat transfer and pressure drop characteristics of flow through spirally fluted tubes , 1992 .

[72]  Huiying Wu,et al.  Compound Enhanced Heat Transfer Inside Tubes by Combined Use of Spirally Corrugated Tubes and Inlet Axial Vane Swirlers , 2000 .

[73]  M. Farhadi,et al.  Experimental investigation of turbulent heat transfer and flow characteristics of SiO2/water nanofluid within helically corrugated tubes☆ , 2012 .

[74]  Mohd Zamri Yusoff,et al.  Numerical investigations of flow and heat transfer enhancement in a corrugated channel using nanofluid , 2011 .

[75]  M. Akhavan-Behabadi,et al.  Experimental study of evaporation heat transfer of R-134a inside a corrugated tube with different tube inclinations , 2014 .

[76]  Jing Ding,et al.  Transition and turbulent convective heat transfer of molten salt in spirally grooved tube , 2013 .

[77]  S. Saha,et al.  Friction and Thermal Characteristics of Laminar Flow of Viscous Oil Through a Circular Tube Having Axial Corrugations and Fitted With Helical Screw-Tape Inserts , 2012 .

[78]  S. Wongwises,et al.  An experimental study into the evaporation heat transfer and flow characteristics of R-134a refrigerant flowing through corrugated tubes , 2011 .

[79]  V. D. Zimparov,et al.  Heat transfer and friction characteristics of spirally corrugated tubes for power plant condensers—1. Experimental investigation and performance evaluation , 1991 .

[80]  Somchai Wongwises,et al.  The effects of corrugation pitch on the condensation heat transfer coefficient and pressure drop of R-134a inside horizontal corrugated tube , 2010 .

[81]  Ventsislav D. Zimparov,et al.  Enhancement of heat transfer by a combination of a single-start spirally corrugated tubes with a twisted tape , 2002 .

[82]  S. Saha,et al.  Experimental investigation of laminar flow of viscous oil through a circular tube having integral spiral corrugation roughness and fitted with twisted tapes with oblique teeth , 2014 .

[83]  S. C. Solanki,et al.  Heat transfer coefficient and friction factor correlations for the transitional flow regime in rib-roughened rectangular ducts , 1999 .

[84]  O. Mahian,et al.  Prediction of heat transfer coefficients and friction factors for evaporation of R-134a flowing inside corrugated tubes , 2014 .

[85]  H. Cui,et al.  EXPERIMENTAL INVESTIGATION OF HEAT TRANSFER AND PRESSURE DROP CHARACTERISTICS OF W-TYPE SPIRALLY FLUTED TUBES , 2003 .

[86]  N. Phan-Thien,et al.  Flow of an oldroyd-type fluid through a sinusoidally corrugated tube , 1987 .

[87]  H. Honda,et al.  Condensation of refrigerants CFC11 and CFC113 in the annulus of a double-tube coil with an enhanced inner tube , 1995 .

[88]  Yong Tae Kang,et al.  The Effect of Fluid Property Variations on Heat Transfer, in Annulus Side of a Spirally Fluted Tube , 2000 .