Abstract The presented paper describes a method of solving the inverse problems of heat conduction, consisting in solving the Poisson equation for a simply connected region instead of the Laplace equation for a multiply connected one, like a gas-turbine blade provided with cooling channels. The considered method consists in determining unknown values of the source (heat sink) power in the cooling channels for a given external heat transfer situation to achieve as close as possible an isothermal outer surface. Afterwards the temperature and heat flux distributions at the cooling channel walls are determined. Since the unknown source power is sought, the problem is an inverse one. Taking into account the sought values the method is reckoned among the class of the fictitious source methods and presents an optimization scheme. Using an exemplary gas turbine blade cooling configuration, the results of the calculation obtained with this method have been compared to the results achieved with an inverse method using the boundary element method for a multiple connected region. The results obtained with both methods within the optimization scheme approximated each other. Nevertheless, the results for the inverse method shown in the present paper gave nearly no oscillations, which is important in case of the blades with other geometric features of the cooling channels.
[1]
Tadeusz Chmielniak,et al.
Optimization of Cooling Passages Within a Turbine Vane
,
2005
.
[2]
J. Taler,et al.
Determination of local heat transfer coefficient from the solution of the inverse heat conduction problem
,
2007
.
[3]
Physical regularization for inverse problems of stationary heat conduction
,
2007
.
[4]
Jiang Luo,et al.
Conjugate heat transfer analysis of a cooled turbine vane using the V2F turbulence model
,
2007
.
[5]
J. Baumeister.
Stable solution of inverse problems
,
1987
.
[6]
Jens von Wolfersdorf,et al.
Shape Optimization of Cooling Channels Using Genetic Algorithms
,
1997
.
[7]
M. S. Mihelc,et al.
Analytical and Experimental Evaluation of the Heat Transfer Distribution over the Surfaces of Turbine Vanes
,
1983
.