Artificial dielectric polarizing-beamsplitter and isolator for the terahertz region

We demonstrate a simple and effective strategy for implementing a polarizing beamsplitter for the terahertz spectral region, based on an artificial dielectric medium that is scalable to a range of desired frequencies. The artificial dielectric medium consists of a uniformly spaced stack of metal plates, which is electromagnetically equivalent to a stacked array of parallel-plate waveguides. The operation of the device relies on both the lowest-order, transverse-electric and transverse-magnetic modes of the parallel-plate waveguide. This is in contrast to previous work that relied solely on the transverse-electric mode. The fabricated polarizing beamsplitter exhibits extinction ratios as high as 42 dB along with insertion losses as low as 0.18 dB. Building on the same idea, we also demonstrate an isolator with non-reciprocal transmission, providing high isolation and low insertion loss at a select design frequency. The performance of our isolator far exceeds that of other experimentally demonstrated terahertz isolators, and indeed, even rivals that of commercially available isolators for optical wavelengths. Because these waveguide-based artificial dielectrics are low loss, inexpensive, and easy to fabricate, this approach offers a promising new route for polarization control of free-space terahertz beams.

[1]  E. Castro-Camus,et al.  Quasi-Wollaston-Prism for Terahertz Frequencies Fabricated by 3D Printing , 2017 .

[2]  Rajind Mendis,et al.  Comparison of the lowest-order transverse-electric (TE1) and transverse-magnetic (TEM) modes of the parallel-plate waveguide for terahertz pulse applications. , 2009, Optics express.

[3]  Igal Brener,et al.  Metamaterials for THz polarimetric devices. , 2009, Optics express.

[4]  D. Grischkowsky,et al.  Undistorted guided-wave propagation of subpicosecond terahertz pulses. , 2001, Optics letters.

[5]  Susumu Takahashi,et al.  Submegahertz linewidth at 240GHz from an injection-locked free-electron laser , 2007, 0706.1116.

[6]  R. Morandotti,et al.  A magnetic non-reciprocal isolator for broadband terahertz operation , 2013, Nature Communications.

[7]  R. J. Wylde,et al.  Wideband Circulators for Use at Frequencies Above 100 GHz to Beyond 350 GHz , 2009, IEEE Transactions on Microwave Theory and Techniques.

[8]  Harish Krishnaswamy,et al.  Magnetic-free non-reciprocity based on staggered commutation , 2016, Nature Communications.

[9]  Hartmut Bartelt,et al.  Diffractive optical isolator made of high-efficiency dielectric gratings only. , 2002, Applied optics.

[10]  D. Mittleman,et al.  A 2-D Artificial Dielectric With ${0 \leq n < 1}$ for the Terahertz Region , 2010, IEEE Transactions on Microwave Theory and Techniques.

[11]  Christopher W. Berry,et al.  Broadband Terahertz Polarizing Beam Splitter on a Polymer Substrate , 2012 .

[12]  W. E. Kock,et al.  Metal-Lens Antennas , 1946, Proceedings of the IRE.

[13]  Daniel M. Mittleman,et al.  Terahertz Artificial Dielectric Lens , 2016, Scientific Reports.

[14]  Julien Perruisseau-Carrier,et al.  Near optimal graphene terahertz non-reciprocal isolator , 2016, Nature Communications.

[15]  Degang Xu,et al.  Compact terahertz wave polarizing beam splitter. , 2010, Applied optics.

[16]  S. Jones,et al.  Metallic Delay Lenses , 1949, Nature.

[17]  E. Black.  An introduction to Pound–Drever–Hall laser frequency stabilization , 2001 .

[18]  J. Brown,et al.  Artificial dielectrics having refractive indices less than unity , 1953 .

[19]  Daniel M. Mittleman,et al.  Study of the impedance mismatch at the output end of a THz parallel-plate waveguide , 2012 .

[20]  B. Maffei,et al.  Alignment Verification of the PLANCK Reflector Configuration by RCS Measurements at 320 GHz , 2008, European Microwave Conference.