Three-dimensional patterning in polymer optical waveguides using focused ion beam milling

Abstract. Waveguide (WG) photonic-bridge taper modules are designed for symmetric planar coupling between silicon WGs and single-mode fibers (SMFs) to minimize photonic chip and packaging footprint requirements with improving broadband functionality. Micromachined fabrication and evaluation of polymer WG tapers utilizing high-resolution focused ion beam (FIB) milling is performed and presented. Polymer etch rates utilizing the FIB and optimal methods for milling polymer tapers are identified for three-dimensional patterning. Polymer WG tapers with low sidewall roughness are manufactured utilizing FIB milling and optically tested for fabrication loss. FIB platforms utilize a focused beam of ions (Ga+) to etch submicron patterns into substrates. Fabricating low-loss polymer WG taper prototypes with the FIB before moving on to mass-production techniques provides theoretical understanding of the polymer taper and its feasibility for connectorization devices between silicon WGs and SMFs.

[1]  Feridun Ay,et al.  Focused-Ion-Beam Processing for Photonics , 2007, 2007 9th International Conference on Transparent Optical Networks.

[2]  T. Dillon,et al.  Fabrication and characterization of three-dimensional silicon tapers. , 2003, Optics express.

[3]  M. Despont,et al.  SU-8: a low-cost negative resist for MEMS , 1997 .

[4]  Ampere A. Tseng,et al.  Recent developments in micromilling using focused ion beam technology , 2004 .

[5]  H. Ryssel,et al.  Defects and gallium-contamination during focused ion beam micro machining , 2000, 2000 International Conference on Ion Implantation Technology Proceedings. Ion Implantation Technology - 2000 (Cat. No.00EX432).

[6]  B. Gale,et al.  A monolithic PDMS waveguide system fabricated using soft-lithography techniques , 2005, Journal of Lightwave Technology.

[7]  Larry R. Dalton,et al.  Three Dimensional Integrated Optics Using Polymers , 1999, Organic Thin Films for Photonics Applications.

[8]  George M Whitesides,et al.  Replication of vertical features smaller than 2 nm by soft lithography. , 2003, Journal of the American Chemical Society.

[9]  Carlos Pina-Hernandez,et al.  High-resolution functional epoxysilsesquioxane-based patterning layers for large-area nanoimprinting. , 2010, ACS nano.

[10]  Bernard Choi,et al.  Step and flash imprint lithography: a new approach to high-resolution patterning , 1999, Advanced Lithography.

[11]  D. Van Thourhout,et al.  Focused-Ion-Beam Fabricated Vertical Fiber Couplers on Silicon-on-Insulator Waveguides , 2006, 3rd IEEE International Conference on Group IV Photonics, 2006..

[12]  John A. Rogers,et al.  Polymer Imprint Lithography with Molecular-Scale Resolution , 2004 .

[13]  P. Sanchis,et al.  Low-loss coupling technique between SOI waveguides and standard single-mode fibers , 2008 .

[14]  J. V. Galán,et al.  Polarization insensitive low-loss coupling technique between SOI waveguides and high mode field diameter single-mode fibers. , 2007, Optics express.

[15]  L. Guo,et al.  Ultrasmall structure fabrication via a facile size modification of nanoimprinted functional silsesquioxane features. , 2011, ACS nano.

[16]  C. Middlebrook,et al.  Polymer taper bridge for silicon waveguide to single mode waveguide coupling , 2016 .