A dynamic alarm management strategy for chemical process transitions

Chemical processes frequently operate upon a multitude of steady states and transitions between these states are inevitable. Unfortunately, transitions are exactly where alarm floods often occur. Alarm floods cause critical alarms overwhelmed and thus increase the probability of larger safety issues. Existing techniques for the design of alarm systems mostly focus on one steady state of operation and yet cannot effectively deal with alarm floods during transitions. In this paper, a dynamic alarm management strategy is proposed for controlling alarm floods during transitions of chemical processes. In this strategy, the artificial immune system-based fault diagnosis (AISFD) method and a Bayesian estimation based dynamic alarm management (BEDAM) method are integrated. During transitions, dynamic alarm limits obtained by the BEDAM method can control alarm floods. However, if a process fault occurs during transitions, a flood of alarms could still be yielded. To generate useful alarms in fault situations, an artificial immune system based on dynamic time warping (DTW) is used for fault detection and diagnosis. Finally, in case studies, the dynamic alarm management strategy is applied to the startup stage and a throughput change transition in a pilot-scale distillation column.

[1]  S. Patwardhan,et al.  Online Fault Diagnosis in Nonlinear Systems Using the Multiple Operating Regime Approach , 2008 .

[2]  Masoud Soroush,et al.  Dynamic risk analysis using alarm databases to improve process safety and product quality: Part II—Bayesian analysis , 2012 .

[3]  Eamonn J. Keogh,et al.  An online algorithm for segmenting time series , 2001, Proceedings 2001 IEEE International Conference on Data Mining.

[4]  Rajagopalan Srinivasan,et al.  Online fault diagnosis and state identification during process transitions using dynamic locus analysis , 2006 .

[5]  J. Noyes,et al.  Alarm systems: a guide to design, management and procurement , 1999 .

[6]  Hiranmayee Vedam,et al.  A framework for managing transitions in chemical plants , 2005, Comput. Chem. Eng..

[7]  W. M. Bolstad.  Introduction to Bayesian Statistics , 2004 .

[8]  Zhi-huan Song,et al.  Online monitoring of nonlinear multiple mode processes based on adaptive local model approach , 2008 .

[9]  Zhiqiang Ge,et al.  Robust Online Monitoring for Multimode Processes Based on Nonlinear External Analysis , 2008 .

[10]  Sirish L. Shah,et al.  An Introduction to Alarm Analysis and Design , 2009 .

[11]  Naoki Kimura,et al.  Use of Two-Layer Cause-Effect Model to Select Source of Signal in Plant Alarm System , 2010, KES.

[12]  Rajagopalan Srinivasan,et al.  Multi-linear model-based fault detection during process transitions , 2003 .

[13]  Sirish L. Shah,et al.  A Framework for Optimal Design of Alarm Systems , 2009 .

[14]  S. Sinha.  Introduction to Bayesian Statistics (2nd ed.) , 2008 .

[15]  S. Qin,et al.  Multiway Gaussian Mixture Model Based Multiphase Batch Process Monitoring , 2009 .

[16]  Jialin Liu,et al.  Nonstationary fault detection and diagnosis for multimode processes , 2009 .

[17]  S. Qin,et al.  Multimode process monitoring with Bayesian inference‐based finite Gaussian mixture models , 2008 .

[18]  Xiwei Liu,et al.  Evaluation of plant alarm systems by behavior simulation using a virtual subject , 2010, Comput. Chem. Eng..

[19]  Fan Yang,et al.  Correlation analysis of alarm data and alarm limit design for industrial processes , 2010, Proceedings of the 2010 American Control Conference.

[20]  Zhiqiang Ge,et al.  Multimode process monitoring based on Bayesian method , 2009 .

[21]  Dustin Beebe,et al.  The Connection of peak alarm rates to plant incidents and what you can do to minimize , 2013 .

[22]  Masoud Soroush,et al.  Dynamic risk analysis using alarm databases to improve process safety and product quality: Part I—Data compaction , 2012 .

[23]  Masaru Noda,et al.  Use of Event Correlation Analysis to Reduce Number of Alarms , 2009 .

[24]  Masahiko Hirao,et al.  Design Method of Alarm System for Identifying Possible Malfunctions in a Plant Based on Cause-Effect Model , 2012 .

[25]  Sirish L. Shah,et al.  Graphical tools for routine assessment of industrial alarm systems , 2012, Comput. Chem. Eng..

[26]  Rajagopalan Srinivasan,et al.  Monitoring transitions in chemical plants using enhanced trend analysis , 2003, Comput. Chem. Eng..

[27]  Masoud Soroush,et al.  Incidents Investigation and Dynamic Analysis of Large Alarm Databases in Chemical Plants: A Fluidized-Catalytic-Cracking Unit Case Study† , 2010 .

[28]  Jonathan Timmis,et al.  An interdisciplinary perspective on artificial immune systems , 2008, Evol. Intell..

[29]  Jinsong Zhao,et al.  Fault Diagnosis of Batch Chemical Processes Using a Dynamic Time Warping (DTW)-Based Artificial Immune System , 2011 .