论文信息 - Wykorzystanie techniki GPS do wyznaczenia kątów heading, pitch i roll

Wykorzystanie techniki GPS do wyznaczenia kątów heading, pitch i roll – część I

This article presents an experiment concerning the designation of heading, pitch and roll angles using GPS technology. For this purpose, authorial HPR_GPS software has been created, the code source of which was written in Scilab 5.4.1 language. Operation of application was presented and an algorithm of estimation of heading, pitch, and roll angles was showed. Additionally, final results of angles from HPR_GPS software were compared with raw INS data. Based on comparison, mean difference for heading angle is equal to 0.29° with standard deviation of 5.96°, for pitch angle it is equal to 4.98° with standard deviation of 1.62°, and for roll angle it is about 0.06° with standard deviation of 2.31°, respectively.

Kamil Krasuski | Damian Wierzbicki

[1] J. Keong,et al. Determining heading and pitch using a single difference GPS/GLONASS approach , 1999 .

[2] J. Kolecki. Wykorzystanie jednostki IMU typu MEMS do określenia przybliżonych elementów orientacji zdjęć naziemnych , 2012 .

[3] Jason A. Jarrell. Employ sensor fusion techniques for determining aircraft attitude and position information , 2008 .

[4] Åke Wernersson,et al. Development of an INS/GPS Navigation Loop for an UAV , 2001 .

[5] Chao-heh Cheng. Calculations for positioning with the Global Navigation Satellite System , 1998 .

[6] Yang Gao,et al. Performance Analysis of Precise Point Positioning Using Rea-Time Orbit and Clock Products , 2004 .

[7] Antonio F. Gómez-Skarmeta,et al. Hybridized GPS/DR Positioning System With Unknown Initial Heading For Land Vehicles , 2008, 2008 11th International IEEE Conference on Intelligent Transportation Systems.