Experimental investigation on the effect of mixing length on the performance of two-phase ejector for CO2 refrigeration cycle with and without heat exchanger

[1]  Masafumi Nakagawa,et al.  Experimental analysis on the effect of internal heat exchanger in transcritical CO2 refrigeration cycle with two-phase ejector. , 2011 .

[2]  M. Nakagawa,et al.  Experimental investigation on the effect of mixing length on the performance of two-phase ejector for CO2 refrigeration cycle with and without heat exchangers. , 2010 .

[3]  Bogdan Diaconu,et al.  Influence of geometrical factors on steam ejector performance – A numerical assessment , 2009 .

[4]  Changyun Wen,et al.  Numerical investigation of geometry parameters for design of high performance ejectors , 2009 .

[5]  Predrag Stojan Hrnjak,et al.  Experimental validation of a prototype ejector designed to reduce throttling losses encountered in transcritical R744 system operation , 2008 .

[6]  T. Sriveerakul,et al.  Performance prediction of steam ejector using computational fluid dynamics: Part 2. Flow structure of a steam ejector influenced by operating pressures and geometries , 2007 .

[7]  Somchai Wongwises,et al.  Effect of throat diameters of the ejector on the performance of the refrigeration cycle using a two-phase ejector as an expansion device , 2007 .

[8]  Pei-Xue Jiang,et al.  Particular characteristics of transcritical CO2 refrigeration cycle with an ejector , 2007 .

[9]  Eckhard A. Groll,et al.  Transcritical CO2 refrigeration cycle with ejector-expansion device , 2005 .

[10]  M. Nakagawa,et al.  Subsequent Report on Nozzle Efficiency of Two-Phase Ejector Used in Carbon Dioxide Refrigerator , 2003 .

[11]  M. Nakagawa,et al.  Mixing of Confined Jet of Mist Flow. , 1994 .