Constant Current Ripple On-Time Control Circuit With Native Adaptive Voltage Positioning Design for Voltage Regulators
暂无分享,去创建一个
[1] Jian Sun. Characterization and performance comparison of ripple-based control for voltage regulator modules , 2006 .
[2] Yen-Shin Lai,et al. Digital Pulsewidth Modulation Technique for a Synchronous Buck DC/DC Converter to Reduce Switching Frequency , 2012, IEEE Transactions on Industrial Electronics.
[3] R. Redl,et al. Switched-noise filter for the buck converter using the output ripple as the PWM ramp , 2005, Twentieth Annual IEEE Applied Power Electronics Conference and Exposition, 2005. APEC 2005..
[4] A. Waizman,et al. Resonant free power network design using extended adaptive voltage positioning (EAVP) methodology , 2001 .
[5] Amit Patra,et al. Discontinuous Map Analysis of a DC-DC Converter Governed by Pulse Skipping Modulation , 2010, IEEE Transactions on Circuits and Systems I: Regular Papers.
[6] Peng Xu,et al. Design considerations for VRM transient response based on the output impedance , 2002, APEC. Seventeenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.02CH37335).
[7] Ke-Horng Chen,et al. Quadratic differential and integration technique in V2 control buck converter with small ESR capacitor , 2009, 2009 IEEE Custom Integrated Circuits Conference.
[8] Jian Li,et al. Current-Mode Control: Modeling and its Digital Application , 2009 .
[9] Amit Patra,et al. Design Principles of a Symmetrically Coupled Inductor Structure for Multiphase Synchronous Buck Converters , 2011, IEEE Transactions on Industrial Electronics.
[10] Paolo Mattavelli,et al. Characterization and performance comparison of digital V2-type constant on-time control for buck converters , 2010, 2010 IEEE 12th Workshop on Control and Modeling for Power Electronics (COMPEL).
[11] Nathan O. Sokal,et al. Near-Optimum Dynamic Regulation of DC-DC Converters Using Feed-Forward of Output Current and Input Voltage with Current-Mode Control , 1986, IEEE Transactions on Power Electronics.
[12] A.V. Peterchev,et al. Digital Multimode Buck Converter Control With Loss-Minimizing Synchronous Rectifier Adaptation , 2006, IEEE Transactions on Power Electronics.
[13] Bocheng Bao,et al. Analysis of Pulse Bursting Phenomenon in Constant-On-Time-Controlled Buck Converter , 2011, IEEE Transactions on Industrial Electronics.
[14] Yim-Shu Lee,et al. Interleaved three-phase forward converter using integrated transformer , 2005, IEEE Transactions on Industrial Electronics.
[15] Ke-Horng Chen,et al. A new PWM/PFM control technique for improving efficiency over wide load range , 2008, 2008 15th IEEE International Conference on Electronics, Circuits and Systems.
[16] Dan Chen,et al. Compensator Design for Adaptive Voltage Positioning (AVP) for Multiphase VRMs , 2006 .
[17] J. Abu-Qahouq,et al. Multiphase voltage-mode hysteretic controlled DC-DC converter with novel current sharing , 2004, IEEE Transactions on Power Electronics.
[18] Santanu K. Mishra,et al. Design-Oriented Analysis of Modern Active Droop-Controlled Power Supplies , 2009, IEEE Transactions on Industrial Electronics.
[19] Dan Chen,et al. Native AVP Control Method for Constant Output Impedance of DC Power Converters , 2007, 2007 IEEE Power Electronics Specialists Conference.
[20] Pit-Leong Wong,et al. Performance Improvements of Multi-Channel Interleaving Voltage Regulator Modules with Integrated Coupling Inductors , 2001 .
[21] Ke-Horng Chen,et al. Quadratic Differential and Integration Technique in $V^{2}$ Control Buck Converter With Small ESR Capacitor , 2010, IEEE Transactions on Power Electronics.
[22] Fred C. Lee,et al. Improved light-load efficiency for synchronous rectifier voltage regulator module , 2000 .
[23] Jian Li,et al. New Modeling Approach and Equivalent Circuit Representation for Current-Mode Control , 2010, IEEE Transactions on Power Electronics.
[24] Bocheng Bao,et al. Dynamical Effects of Equivalent Series Resistance of Output Capacitor in Constant On-Time Controlled Buck Converter , 2013, IEEE Transactions on Industrial Electronics.
[25] Jian Sun,et al. Ripple-Based Control of Switching Regulators—An Overview , 2009, IEEE Transactions on Power Electronics.
[26] F.C. Lee,et al. Adaptive voltage position design for voltage regulators , 2004, Nineteenth Annual IEEE Applied Power Electronics Conference and Exposition, 2004. APEC '04..
[27] Philip K. T. Mok,et al. A Constant Frequency Output-Ripple-Voltage-Based Buck Converter Without Using Large ESR Capacitor , 2008, IEEE Transactions on Circuits and Systems II: Express Briefs.
[28] Caisheng Wang,et al. Analysis of Inductor Current Sharing in Nonisolated and Isolated Multiphase dc–dc Converters , 2007, IEEE Transactions on Industrial Electronics.
[29] W. Huang. A new control for multi-phase buck converter with fast transient response , 2001, APEC 2001. Sixteenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.01CH37181).
[30] Jiann-Fuh Chen,et al. Improved transient response using high-frequency feedback control circuit of the constant current ripple constant on-time with native adaptive voltage positioning design for voltage regulators , 2013 .
[31] S. Angkititrakul,et al. Design and analysis of buck converter with pulse-skipping modulation , 2008, 2008 IEEE Power Electronics Specialists Conference.
[32] Jaber A. Abu-Qahouq,et al. Power Converter With Digital Sensorless Adaptive Voltage Positioning Control Scheme , 2011, IEEE Transactions on Industrial Electronics.
[33] Po-Wa Lee,et al. Steady-state analysis of an interleaved boost converter with coupled inductors , 2000, IEEE Trans. Ind. Electron..