A sensitivity study of a hybrid photovoltaic/thermal water-heating system with natural circulation

A flat-box aluminum-alloy photovoltaic and water-heating system designed for natural circulation was constructed. The hybrid photovoltaic/thermal (PV/T) collector was an integration of single-crystalline silicon cells into a solar thermal collector. The product was able to generate electricity and hot water simultaneously. Outdoor tests on an improved prototype were conducted in a moderate climate zone. Then dynamic simulation runs, using a validated numerical model, were performed. These included sensitivity tests with variations of the system water mass, PV cell covering factor, and front glazing transmissivity. The test results showed that the characteristic daily primary-energy saving could reach up to 65% for this system with a PV cell covering factor 0.63 and front glazing transmissivity of 0.83, when the hot water load per unit heat-collecting area exceeded 80Â kg/m2. The simulated results indicated that the higher the PV cell covering factor and the glazing transmissivity, the better the overall system performance. The effects were quantified.

[1]  U. Dehesa-Carrasco,et al.  Photovoltaic solar panel for a hybrid PV/thermal system , 2004 .

[2]  Jie Ji,et al.  Hybrid photovoltaic-thermosyphon water heating system for residential application , 2006 .

[3]  H. P. Garg,et al.  EXPERIMENTAL AND THEORETICAL STUDIES ON A PHOTOVOLTAIC/THERMAL HYBRID SOLAR COLLECTOR WATER HEATER , 1990 .

[4]  Shintaro Yokoyama,et al.  Field experiments and analyses on a hybrid solar collector , 2003 .

[5]  Gunter Rockendorf,et al.  PV-hybrid and thermoelectric collectors , 1999 .

[6]  Bin-Juine Huang,et al.  A performance test method of solar thermosyphon systems , 1991 .

[7]  Tin-Tai Chow,et al.  Hybrid photovoltaic and thermal solar-collector designed for natural circulation of water , 2006 .

[8]  Y. Tripanagnostopoulos,et al.  Hybrid photovoltaic/thermal solar systems , 2002 .

[9]  L. W. Florschuetz Extension of the Hottel-Whillier model to the analysis of combined photovoltaic/thermal flat plate collectors , 1976 .

[10]  T. Bergene,et al.  Model calculations on a flat-plate solar heat collector with integrated solar cells , 1995 .

[11]  Tin-Tai Chow,et al.  Performance analysis of photovoltaic-thermal collector by explicit dynamic model , 2003 .

[12]  Bin-Juine Huang,et al.  PERFORMANCE EVALUATION OF SOLAR PHOTOVOLTAIC / THERMAL SYSTEMS , 2001 .

[13]  Joseph McCabe Optimization of Photovoltaic/Thermal Collectors , 2004 .

[14]  B. Sandnes,et al.  A photovoltaic/thermal (PV/T) collector with a polymer absorber plate. Experimental study and analytical model , 2002 .