Research on drilling CFRP laminate with a thin woven glass fiber surface layer using plane rake–faced twist drill

[1]  Z. Deng,et al.  Morphological characteristics and formation mechanisms of the UD-CFRP drill exit-damages , 2020 .

[2]  Xinggang Jiang,et al.  Delamination formation and suppression during rotary ultrasonic elliptical machining of CFRP , 2020 .

[3]  F. Lachaud,et al.  Effect of adding a woven glass ply at the exit of the hole of CFRP laminates on delamination during drilling , 2020 .

[4]  J. Paulo Davim,et al.  Advanced cutting tools and technologies for drilling carbon fibre reinforced polymer (CFRP) composites: A review , 2019, Composites Part A: Applied Science and Manufacturing.

[5]  Zhenhua Wang,et al.  Novel drill bit based on the step-control scheme for reducing the CFRP delamination , 2018, Journal of Materials Processing Technology.

[6]  F. Sun,et al.  Combined influences of tool shape and as-deposited diamond film on cutting performance of drills for CFRP machining , 2018, Surface and Coatings Technology.

[7]  P. Soares,et al.  Tribocorrosion behavior of low friction TiSiCN nanocomposite coatings deposited on titanium alloy for biomedical applications , 2018, Surface and Coatings Technology.

[8]  M. Uthayakumar,et al.  Review on Machinability of Fiber Reinforced Polymers: A Drilling Approach , 2018, Silicon.

[9]  Tae Jo Ko,et al.  Influence of machining parameters and tool structure on cutting force and hole wall damage in drilling CFRP with stepped drills , 2018, The International Journal of Advanced Manufacturing Technology.

[10]  Wing Kam Liu,et al.  A micro-scale cutting model for UD CFRP composites with thermo-mechanical coupling , 2017 .

[11]  Ming Chen,et al.  An experimental investigation on cutting-induced damage when drilling high-strength T800S/250F carbon fiber–reinforced polymer , 2017 .

[12]  A. B. Abdullah,et al.  Delamination measurement of a laminates composite panel due to hole punching based on the focus variation technique , 2017 .

[13]  Zhenyuan Jia,et al.  Effects of cutting edge radius and fiber cutting angle on the cutting-induced surface damage in machining of unidirectional CFRP composite laminates , 2017 .

[14]  Zhenyuan Jia,et al.  Novel drill structure for damage reduction in drilling CFRP composites , 2016 .

[15]  S. Gururaja,et al.  Machining damage in FRPs: Laser versus conventional drilling , 2016 .

[16]  J. Costes,et al.  CFRP drilling: Fundamental study of local feed force and consequences on hole exit damage , 2015 .

[17]  Z. Aboura,et al.  Experimental investigation of drilling damage and stitching effects on the mechanical behavior of carbon/epoxy composites , 2014 .

[18]  Ming Chen,et al.  A comparative evaluation of polycrystalline diamond drills in drilling high-strength T800S/250F CFRP , 2014 .

[19]  Ming Chen,et al.  Drilling machinability evaluation on new developed high-strength T800S/250F CFRP laminates , 2013 .

[20]  M. Wisnom,et al.  Composites Part A: Applied Science and Manufacturing , 2012 .

[21]  Weilong Cong,et al.  A review of mechanical drilling for composite laminates , 2012 .

[22]  Paul Xirouchakis,et al.  Experimental analysis of drilling fiber reinforced composites , 2011 .

[23]  Jamal Ahmad,et al.  Machining of Polymer Composites , 2008 .

[24]  Jun Wang,et al.  A study of high-performance plane rake faced twist drills.: Part I: Geometrical analysis and experimental investigation , 2008 .

[25]  Constantinos Soutis,et al.  Fibre reinforced composites in aircraft construction , 2005 .

[26]  Liangchi Zhang,et al.  An experimental investigation into the orthogonal cutting of unidirectional fibre reinforced plastics , 2003 .

[27]  V. Tagliaferri,et al.  Drilling Damage of GFRP and Residual Mechanical Behavior—Part I: Drilling Damage Generation , 2001 .

[28]  E.J.A. Armarego,et al.  Drilling wih flat rake face and conventional twist drills—II. Experimental investigation , 1972 .

[29]  E.J.A. Armarego,et al.  Drilling with flat rake face and conventional twist drills—I. Theoretical investigation , 1972 .

[30]  E.J.A. Armarego,et al.  Experiments with controlled-contact tools , 1966 .

[31]  Wolfgang Hintze,et al.  Modeling of Delamination During Milling of Unidirectional CFRP , 2013 .