3.01 – Finite Element Methods for Linear Elastic Fracture Mechanics

[1]  Hideomi Ohtsubo,et al.  STABILITY CONDITIONS FOR PROPAGATION OF A SYSTEM OF CRACKS IN A BRITTLE SOLID , 1977 .

[2]  M. German,et al.  Crack extension modeling with singular quadratic isoparametric elements , 1976 .

[3]  H. Ishikawa,et al.  J INTEGRAL OF A MIXED MODE CRACK AND ITS APPLICATION , 1980 .

[4]  Carl T. Herakovich,et al.  A Normal Stress Criterion for Crack Extension Direction in Orthotropic Composite Materials , 1985 .

[5]  Paul A. Wawrzynek,et al.  Discrete crack growth analysis methodology for through cracks in pressurized fuselage structures , 1995 .

[6]  J. N. Reddy,et al.  The Jacobian derivative method for three‐dimensional fracture mechanics , 1990 .

[7]  J. F. Knott,et al.  The fracture behaviour of PMMA in mixed modes I and II , 1989 .

[8]  T. Fett.  A Green's function for T-stresses in an edge-cracked rectangular plate , 1997 .

[9]  S. Nemat-Nasser,et al.  On crack path stability in a finite body , 1985 .

[10]  I. N. Sneddon.  The distribution of stress in the neighbourhood of a crack in an elastic solid , 1946, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[11]  A. Pineau,et al.  Mixed mode fracture of a brittle orthotropic material—example of strongly textured zinc sheets , 1981 .

[12]  M. Isida.  Effect of width and length on stress intensity factors of internally cracked plates under various boundary conditions , 1971 .

[13]  R. Barsoum.  Triangular quarter‐point elements as elastic and perfectly‐plastic crack tip elements , 1977 .

[14]  T. Sham.  The determination of the elastic T-term using higher order weight functions , 1991 .

[15]  G. Sih,et al.  An approximate three-dimensional theory of plates with application to crack problems☆ , 1970 .

[16]  D. M. Parks.  A stiffness derivative finite element technique for determination of crack tip stress intensity factors , 1974 .

[17]  H. deLorenzi,et al.  On the energy release rate and the J-integral for 3-D crack configurations , 1982 .

[18]  J. W. Hancock,et al.  J-Dominance of short cracks in tension and bending , 1991 .

[19]  Lung-An Ying.  A note on the singularity and the strain energy of singular elements , 1982 .

[20]  L. F. Coffin,et al.  Three dimensional singular element , 1981 .

[21]  Victor E. Saouma,et al.  Numerical evaluation of 3-D SIF for arbitrary finite element meshes , 1997 .

[22]  H. G. Delorenzi.  Energy release rate calculations by the finite element method , 1985 .

[23]  Leslie Banks-Sills,et al.  On singular, nine-noded, distorted, isoparametric elements in linear elastic fracture mechanics , 1987 .

[24]  S. K. Maiti,et al.  Comparison of the criteria for mixed mode brittle fracture based on the preinstability stress-strain field Part I: Slit and elliptical cracks under uniaxial tensile loading , 1983 .

[25]  Z. Bažant,et al.  Stability and post-critical growth of a system of cooling or shrinkage cracks , 1979 .

[26]  Leon M Keer,et al.  A new combined analytical and finite-element solution method for stability analysis of the growth of interacting tension cracks in brittle solids , 1980 .

[27]  Hubertus Anna Joseph Knops,et al.  Numerical simulation of crack growth in pressurized fuselages , 1994 .

[28]  D. Sherman,et al.  On the computation of stress intensity factors for three-dimensional geometries by means of the stiffness derivative and J-integral methods , 1992, International Journal of Fracture.

[29]  Alan T. Zehnder,et al.  Computation of membrane and bending stress intensity factors for thin, cracked plates , 1995 .

[30]  G. Irwin.  Crack-Extension Force for a Part-Through Crack in a Plate , 1962 .

[31]  S. Atluri,et al.  CALCULATION OF FRACTURE MECHANICS PARAMETERS FOR AN ARBITRARY THREE-DIMENSIONAL CRACK, BY THE ‘EQUIVALENT DOMAIN INTEGRAL’ METHOD , 1987 .

[32]  A. J. Carlsson,et al.  Influence of non-singular stress terms and specimen geometry on small-scale yielding at crack tips in elastic-plastic materials , 1973 .

[33]  T. K. Hellen.  On the method of virtual crack extensions , 1975 .

[34]  J. Rice,et al.  Slightly curved or kinked cracks , 1980 .

[35]  M. Isida,et al.  Formulae of stress intensity factors at tips of kinked cracks under various loadings , 1990 .

[36]  Theodore H. H. Pian,et al.  A hybrid‐element approach to crack problems in plane elasticity , 1973 .

[37]  A. Kfouri.  Some evaluations of the elastic T-term using Eshelby's method , 1986 .

[38]  Chuin-Shan Chen,et al.  Numerical assessment of T-stress computation using a p-version finite element method , 2001 .

[39]  Leslie Banks-Sills,et al.  Update: Application of the Finite Element Method to Linear Elastic Fracture Mechanics , 1991 .

[40]  R. E. Worden,et al.  Investigation of Fuselage Structure Subject to Widespread Fatigue Damage , 1996 .

[41]  I. Finnie,et al.  An experimental investigation of crack-path directional stability , 1980 .

[42]  Leon M Keer,et al.  Stress-intensity factors for a semi-infinite plane crack with a wavy front , 1984 .

[43]  P. C. Paris,et al.  On cracks in rectilinearly anisotropic bodies , 1965 .

[44]  J. Knott,et al.  The low temperature brittle fracture behaviour of steel in mixed modes I and II , 1991 .

[45]  J. Rice.  A path-independent integral and the approximate analysis of strain , 1968 .

[46]  Satya N. Atluri,et al.  An assumed displacement hybrid finite element model for linear fracture mechanics , 1975 .

[47]  Paul A. Wawrzynek,et al.  On the virtual crack extension method for calculating the derivatives of energy release rates for a 3D planar crack of arbitrary shape under mode-I loading , 2001 .

[48]  James G. Goree,et al.  T-stress based fracture model for cracks in isotropic materials , 1998 .

[49]  L. Banks‐Sills.  Quarter-point singular elements revisited , 1987 .

[50]  R. S. Dunham,et al.  A contour integral computation of mixed-mode stress intensity factors , 1976, International Journal of Fracture.

[51]  M. Kanninen,et al.  A finite element calculation of stress intensity factors by a modified crack closure integral , 1977 .

[52]  Paul A. Wawrzynek,et al.  Quasi-automatic simulation of crack propagation for 2D LEFM problems , 1996 .

[53]  I. Babuska,et al.  A numerical method with a posteriori error estimation for determining the path taken by a propagating crack , 1998 .

[54]  D. M. Tracey,et al.  Discussion of ‘on the use of isoparametric finite elements in linear fracture mechanics’ by R. S. Barsoum , 1977 .

[55]  Esben Byskov,et al.  The calculation of stress intensity factors ssing the finite element method with cracked elements , 1970 .

[56]  H. Ishikawa,et al.  A finite element analysis of stress intensity factors for combined tensile and shear loading by only a virtual crack extension , 1980 .

[57]  John F. Abel,et al.  Variational approach for a new direct-integration form of the virtual crack extension method , 1988, International Journal of Fracture.

[58]  S. Chan,et al.  On the Finite Element Method in Linear Fracture Mechanics , 1970 .

[59]  D. Sherman,et al.  On quarter-point three-dimensional finite elements in linear elastic fracture mechanics , 1989 .

[60]  H. D. Bui,et al.  Associated path independent J-integrals for separating mixed modes , 1983 .

[61]  S. Benzley.  Representation of singularities with isoparametric finite elements , 1974 .

[62]  Paul A. Wawrzynek,et al.  Simulating Fatigue Crack Growth in Spiral Bevel Gears , 2001 .

[63]  S. Nemat-Nasser,et al.  Unstable growth of tension cracks in brittle solids: Stable and unstable bifurcations, snap-through, and imperfection sensitivity , 1980 .

[64]  C. Manu.  Quarter-point elements for curved crack fronts , 1983 .

[65]  Michael A. Sutton,et al.  Development and application of a crack tip opening displacement-based mixed mode fracture criterion , 2000 .

[66]  Michael A. Sutton,et al.  Prediction of crack growth direction for mode I/II loading using small-scale yielding and void initiation/growth concepts , 1997 .

[67]  F. Erdogan,et al.  Surface crack problems in plates , 1989 .

[68]  E. Reissner,et al.  On bending of elastic plates , 1947 .

[69]  Victor E. Saouma,et al.  Numerical evaluation of the quarter‐point crack tip element , 1984 .

[70]  F. Erdogan,et al.  On the Crack Extension in Plates Under Plane Loading and Transverse Shear , 1963 .

[71]  Iain Finnie,et al.  A note on the angled crack problem and the directional stability of cracks , 1973, International Journal of Fracture.

[72]  A. Ingraffea,et al.  Stress‐intensity factor computation in three dimensions with quarter‐point elements , 1980 .

[73]  C. Hui,et al.  A theory for the fracture of thin plates subjected to bending and twisting moments , 1993 .

[74]  Complete quadratic isoparametric finite elements in fracture mechanics analysis , 1985 .

[75]  P. Theocaris,et al.  A Modified Strain-Energy Density Criterion Applied to Crack Propagation , 1982 .

[76]  M. Williams.  The Bending Stress Distribution at the Base of a Stationary Crack , 1961 .

[77]  A. Hoenig.  Near-tip behavior of a crack in a plane anisotropic elastic body , 1982 .

[78]  Paul A. Wawrzynek,et al.  On the virtual crack extension method for calculation of the rates of energy release rate , 1998 .

[79]  Nguyen Quoc Son.  Normal Dissipativity and Energy Criteria in Fracture , 1980 .

[80]  H. Hibbitt.  Some properties of singular isoparametric elements , 1977 .

[81]  Abubakr A. Bazant,et al.  Instability and Spacing of Cooling or Shrinkage Cracks , 1979 .

[82]  Alan F. Liu.  Crack Growth and Failure of Aluminum Plate under In-Plane Shear , 1973 .

[83]  D. M. Tracey,et al.  The natural isoparametric triangle versus collapsed quadrilateral for elastic crack analysis , 1976, International Journal of Fracture.

[84]  On the problem of a pair of point forces applied to the faces of a semi-infinite plane crack , 1984 .

[85]  John R. Rice,et al.  Somewhat circular tensile cracks , 1987 .

[86]  P. Leevers,et al.  Inherent stress biaxiality in various fracture specimen geometries , 1982 .

[87]  G. P. Cherepanov.  Crack propagation in continuous media , 1967 .

[88]  L. P. Pook,et al.  The effect of crack angle on fracture toughness , 1971 .

[89]  Quoc Son Nguyen,et al.  Bifurcation and stability in dissipative media (plasticity, friction, fracture) , 1994 .

[90]  N. M. Wang.  Twisting of an elastic plate containing a crack , 1970 .

[91]  S. Nemat-Nasser,et al.  Unstable growth of thermally induced interacting cracks in brittle solids: Further results , 1979 .

[92]  Huajian Gao,et al.  Shear Stress Intensity Factors for a Planar Crack With Slightly Curved Front , 1986 .

[93]  S. Nemat-Nasser.  Stability of a system of interacting cracks , 1978 .

[94]  Paul A. Wawrzynek,et al.  Universal crack closure integral for SIF estimation , 1998 .

[95]  William F. Brown,et al.  Stress-Intensity Factors for a Single-Edge-Notch Tension Specimen by Boundary Collocation of a Stress Function , 1964 .

[96]  James K. Knowles,et al.  On the Bending of an Elastic Plate Containing a Crack , 1960 .

[97]  Anthony R. Ingraffea,et al.  A methodology for fatigue crack growth and residual strength prediction with applications to aircraft fuselages , 1997 .

[98]  J. G. Williams,et al.  Fracture under complex stress — The angled crack problem , 1984 .

[99]  R. W. J. Koers,et al.  Use of modified standard 20-node isoparametric brick elements for representing stress/strain fields at a crack tip for elastic and perfectly plastic material , 1989 .

[100]  I. Raju.  Calculation of strain-energy release rates with higher order and singular finite elements , 1987 .

[101]  M. Williams,et al.  On the Stress Distribution at the Base of a Stationary Crack , 1956 .

[102]  D. M. Tracey,et al.  Finite elements for determination of crack tip elastic stress intensity factors , 1971 .

[103]  James R. Rice,et al.  First-Order Variation in Elastic Fields Due to Variation in Location of a Planar Crack Front , 1985 .

[104]  D. S. Dugdale.  Yielding of steel sheets containing slits , 1960 .

[105]  R. D. Henshell,et al.  CRACK TIP FINITE ELEMENTS ARE UNNECESSARY , 1975 .

[106]  Robert B. Haber,et al.  Explicit expressions for energy release rates using virtual crack extensions , 1985 .

[107]  Pericles S. Theocaris,et al.  Variations on the theme of fracture criteria , 1989 .

[108]  S. G. Papaioannou,et al.  A finite element method for calculating stress intensity factors and its application to composites , 1974 .

[109]  Paul A. Wawrzynek,et al.  Residual Strength Prediction of Aircraft Fuselages Using Crack-Tip Opening Angle Criterion , 2002 .

[110]  A. Needleman,et al.  A COMPARISON OF METHODS FOR CALCULATING ENERGY RELEASE RATES , 1985 .

[111]  L. E. Culver,et al.  Notch root radii effects in the fatigue of polymers , 1970 .

[112]  Albert S. Kobayashi,et al.  Dynamic crack curving—A photoelastic evaluation , 1983 .

[113]  Leon M Keer,et al.  Unstable growth of thermally induced interacting cracks in brittle solids , 1978 .

[114]  J. Rice,et al.  Conservation Laws and Energy-Release Rates , 1973 .

[115]  B. Dattaguru,et al.  A general procedure for modified crack closure integral in 3D problems with cracks , 1994 .

[116]  B. Dattaguru,et al.  Modified crack closure integral method with quarter point elements , 1986 .

[117]  Shuodao Wang,et al.  A Mixed-Mode Crack Analysis of Isotropic Solids Using Conservation Laws of Elasticity , 1980 .

[118]  G. Sih.  Strain-energy-density factor applied to mixed mode crack problems , 1974 .

[119]  G. C. Sih,et al.  Effect of Plate Thickness on the Bending Stress Distribution Around Through Cracks , 1968 .

[120]  Leslie Banks-Sills,et al.  Reappraisal of the quarter-point quadrilateral element in linear elastic fracture mechanics , 1984 .

[121]  B. Moran,et al.  A general treatment of crack tip contour integrals , 1987 .

[122]  R. Barsoum.  On the use of isoparametric finite elements in linear fracture mechanics , 1976 .

[123]  John R. Rice,et al.  A first-order perturbation analysis of crack trapping by arrays of obstacles , 1989 .

[124]  Claude Stolz,et al.  Energy methods in fracture mechanics: stability, bifurcation and second variations , 1990 .

[125]  M. James,et al.  A plane stress finite element model for elastic-plastic mode I/II crack growth , 1998 .

[126]  Paul A. Wawrzynek,et al.  Simulating Fatigue Crack Growth in Spiral Bevel Gears Using Computational Fracture Mechanics , 2003 .

[127]  Paul A. Wawrzynek,et al.  Interactive finite element analysis of fracture processes: An integrated approach , 1987 .

[128]  Hussain,et al.  Strain Energy Release Rate for a Crack Under Combined Mode I and Mode II , 1974 .