Eliminating the non-Gaussian spectral response of X-ray absorbers for transition-edge sensors

Transition-edge sensors (TESs) as microcalorimeters for high-energy-resolution X-ray spectroscopy are often fabricated with an absorber made of materials with high Z (for X-ray stopping power) and low heat capacity (for high resolving power). Bismuth represents one of the most compelling options. TESs with evaporated bismuth absorbers have shown spectra with undesirable and unexplained low-energy tails. We have developed TESs with electroplated bismuth absorbers over a gold layer that are not afflicted by this problem and that retain the other positive aspects of this material. To better understand these phenomena, we have studied a series of TESs with gold, gold/evaporated bismuth, and gold/electroplated bismuth absorbers, fabricated on the same die with identical thermal coupling. We show that the bismuth morphology is linked to the spectral response of X-ray TES microcalorimeters.

[1]  G. C. Hilton,et al.  A practical superconducting-microcalorimeter X-ray spectrometer for beamline and laboratory science. , 2017, The Review of scientific instruments.

[2]  T. Ishikawa,et al.  On the size of the secondary electron cloud in crystals irradiated by hard X-ray photons , 2017 .

[3]  T. Cecil,et al.  Development of Thick Electroplated Bismuth Absorbers for Large Collection Area Hard X-ray Transition Edge Sensors , 2017, IEEE Transactions on Applied Superconductivity.

[4]  G. C. Hilton,et al.  A reassessment of absolute energies of the x-ray L lines of lanthanide metals , 2017, 1702.00507.

[5]  G. Hilton,et al.  Absolute Energy Calibration of X-ray TESs with 0.04 eV Uncertainty at 6.4 keV in a Hadron-Beam Environment , 2016, 1601.03293.

[6]  W. B. Doriese,et al.  The Practice of Pulse Processing , 2015, Journal of Low Temperature Physics.

[7]  Stefan Vogt,et al.  Optimizing detector geometry for trace element mapping by X-ray fluorescence. , 2015, Ultramicroscopy.

[8]  R. Harder,et al.  Nanoscale Hard X-Ray Microscopy Methods for Materials Studies* , 2013 .

[9]  S. E. Offerman,et al.  A fast methodology to determine the characteristics of thousands of grains using three‐dimensional X‐ray diffraction. II. Volume, centre‐of‐mass position, crystallographic orientation and strain state of grains , 2012 .

[10]  A. Kozorezov.  Energy Down-Conversion and Thermalization in Metal Absorbers , 2012 .

[11]  M. Miller,et al.  High-energy diffraction microscopy at the advanced photon source , 2011 .

[12]  S. R. Bandler,et al.  Performance of TES X-ray Microcalorimeters with a Novel Absorber Design , 2008 .

[13]  Simon R. Bandler,et al.  High-density arrays of x-ray microcalorimeters for Constellation-X , 2006, SPIE Astronomical Telescopes + Instrumentation.

[14]  Kent D. Irwin,et al.  Optimized transition-edge x-ray microcalorimeter with 2.4eV energy resolution at 5.9keV , 2005 .

[15]  Yu-Ming Lin,et al.  Theoretical investigation of thermoelectric transport properties of cylindrical Bi nanowires , 2000 .

[16]  M. Dresselhaus,et al.  Transport properties of Bi nanowire arrays , 2000 .

[17]  Chien,et al.  Large magnetoresistance of electrodeposited single-crystal bismuth thin films , 1999, Science.

[18]  Moshe Deutsch,et al.  KALPHA 1,2 AND KBETA 1,3 X-RAY EMISSION LINES OF THE 3D TRANSITION METALS , 1997 .

[19]  P. Andreo,et al.  An analytic formula for the extrapolated range of electrons in condensed materials , 1996 .

[20]  D. McCammon,et al.  Thermalization of X-rays in evaporated tin and bismuth films used as the absorbing materials in X-ray calorimeters , 1993 .

[21]  Hoffman,et al.  Semimetal-to-semiconductor transition in bismuth thin films. , 1993, Physical review. B, Condensed matter.

[22]  C. Uher,et al.  Thermal conductivity of tin-doped bismuth between 50 mK and 7K , 1985 .

[23]  G. R. Pickett,et al.  Specific Heat of Antimony and Bismuth between 0.03 and 0.8 K , 1970 .

[24]  A. L. Patterson.  The Scherrer Formula for X-Ray Particle Size Determination , 1939 .