Evaluating Bluetooth Low Energy Suitability for Time-Critical Industrial IoT Applications

In recent years, integration of wireless sensor networks in industrial environments has greatly increased. With this trend, new fields such as industrial IoT have arisen, which in turn have opened the doors to new possibilities that are shaping the future of industrial automation. In contrast to regular wireless networks, however, industrial applications of WSN are characterized for being time-critical systems with highly stringent requirements that challenge all available technologies. Because of its ultra-low energy properties, compatibility with most mobile units, reduced production costs, robustness and high throughput, Bluetooth low energy (BLE) is a potential candidate for these settings. This article explores the potential of BLE of meeting the real-time demands found in the domain of industrial process automation and industrial IoT. In order to evaluate the suitability of the protocol for these scenarios, the effect of adaptations in the retransmission scheme on the reliability and timeliness performance are thoroughly studied. Three retransmission schemes are evaluated and simulation results proved that by optimally modifying the BLE retransmission model, a maximum delay below 46 ms and a packet loss rate in the order of 105 can be obtained, enabling BLE to fulfill the requirements of even the most demanding cases within the considered range of applications.

[1]  Per Ängskog,et al.  Challenges and conditions for wireless machine-to-machine communications in industrial environments , 2013, IEEE Communications Magazine.

[2]  Mikael Gidlund,et al.  Future research challenges in wireless sensor and actuator networks targeting industrial automation , 2011, 2011 9th IEEE International Conference on Industrial Informatics.

[3]  Arzad Alam Kherani,et al.  Power and QoS optimization for BLE-based Accessory-Smartphone communications , 2015, 2015 12th Annual IEEE Consumer Communications and Networking Conference (CCNC).

[4]  Pedro Gonçalves,et al.  Enabling IIoT IP backbones with real-time guarantees , 2015, 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA).

[5]  Jia Liu,et al.  Modeling and performance analysis of device discovery in Bluetooth Low Energy networks , 2012, 2012 IEEE Global Communications Conference (GLOBECOM).

[6]  Francesco De Pellegrini,et al.  On the use of wireless networks at low level of factory automation systems , 2006, IEEE Transactions on Industrial Informatics.

[7]  Lucia Lo Bello,et al.  A Bluetooth Low Energy real-time protocol for Industrial Wireless mesh Networks , 2016, IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society.

[8]  Cengis Hasan,et al.  2013 IEEE 9th International Conference on Wireless and Mobile Computing, Networking and Communications (WiMob) , 2013 .

[9]  Matti Siekkinen,et al.  How low energy is bluetooth low energy? Comparative measurements with ZigBee/802.15.4 , 2012, 2012 IEEE Wireless Communications and Networking Conference Workshops (WCNCW).

[10]  Konstantin Mikhaylov.  Simulation of network-level performance for Bluetooth Low Energy , 2014, 2014 IEEE 25th Annual International Symposium on Personal, Indoor, and Mobile Radio Communication (PIMRC).

[11]  Florin Ciucu,et al.  Performance modelling and analysis of unreliable links with retransmissions using network calculus , 2013, Proceedings of the 2013 25th International Teletraffic Congress (ITC).

[12]  Dr. R. V. Krishnaiah,et al.  Overview and Evaluation of Bluetooth Low Energy: An Emerging Low-Power Wireless Technology , 2013 .

[13]  Konstantin Mikhaylov,et al.  Performance Analysis and Comparison of Bluetooth Low Energy with IEEE 802.15.4 and SimpliciTI , 2013, J. Sens. Actuator Networks.

[14]  Song Han,et al.  RT-WiFi: Real-Time High-Speed Communication Protocol for Wireless Cyber-Physical Control Applications , 2013, 2013 IEEE 34th Real-Time Systems Symposium.

[15]  S. Khan,et al.  On Preamble Detection in Packet-Based Wireless Networks , 2006, 2006 IEEE Ninth International Symposium on Spread Spectrum Techniques and Applications.

[16]  Luiz Affonso Guedes,et al.  Reliability and Availability Evaluation of Wireless Sensor Networks for Industrial Applications , 2012, Sensors.

[17]  Konstantin Mikhaylov.  Accelerated Connection Establishment (ACE) mechanism for Bluetooth Low Energy , 2014, 2014 IEEE 25th Annual International Symposium on Personal, Indoor, and Mobile Radio Communication (PIMRC).

[18]  Qi Hao,et al.  Bluetooth low energy for wearable sensor-based healthcare systems , 2014, 2014 IEEE Healthcare Innovation Conference (HIC).

[19]  W. Marsden.  I and J , 2012 .

[20]  Carles Gomez,et al.  Modeling the Maximum Throughput of Bluetooth Low Energy in an Error-Prone Link , 2011, IEEE Communications Letters.

[21]  Hazem H. Refai,et al.  Bluetooth standard v4.1: Simulating the Bluetooth low energy data channel selection algorithm , 2014, 2014 IEEE Globecom Workshops (GC Wkshps).

[22]  Mikael Gidlund,et al.  An analytical model of the effective delay performance for Bluetooth low energy , 2016, 2016 IEEE 27th Annual International Symposium on Personal, Indoor, and Mobile Radio Communications (PIMRC).