NEST HiLo: Investigating lightweight construction and adaptive energy systems

Abstract This paper presents research on lightweight construction and smart, integrated and adaptive building systems. The research is focused on addressing challenges related to the building industry at large, including most prominently the improvement of energy efficiency, onsite power generation, and the reduction of the quantity of materials required to build. We introduce four innovations in context of the design of an experimental building (NEST HiLo): a lightweight, unreinforced funicular floor system; a flexibly formed, concrete shell sandwich roof; a soft actuated, adaptive solar facade and an automated, occupant-centred control system. We demonstrate novel structural engineering approaches to compression-only concrete elements and shell design using multi-criteria shape optimisation. We explore a building facade concept, which employs robotic actuators for solar shading and on-site generation. In addition, the operational phase of the building will be used as a living laboratory where occupants' locations and needs for comfort are detected and used for the control of the energy innovations. The research provides insight into design topics that will become increasingly relevant for the evolution of improved lifecycle energy buildings.

[1]  Delia D׳Agostino,et al.  Assessment of the progress towards the establishment of definitions of Nearly Zero Energy Buildings (nZEBs) in European Member States , 2015 .

[2]  Rakesh K. Kapania,et al.  Multi-objective vibro-acoustic optimization of stiffened panels , 2015 .

[3]  Arno Schlueter,et al.  Adaptive Distributed Robotics for Environmental Performance, Occupant Comfort and Architectural Expression , 2012 .

[4]  Philippe Block,et al.  Prototype of an ultra-thin, concrete vaulted floor system , 2014 .

[5]  Diederik VEENENDAAL,et al.  Structural design of the cable-net and fabric formed , ferrocement sandwich shell roof of NEST HiLo , 2015 .

[6]  Olga Sorkine-Hornung,et al.  Best-fit thrust network analysis: rationalization of freeform meshes , 2014, Shell Structures for Architecture.

[7]  Philippe Block,et al.  Minimization of sound radiation in doubly curved shallow shell structures by means of stiffness , 2016 .

[8]  Zoltán Nagy,et al.  Experimental Characterization of a 2-DOF Soft Robotic Platform for Architectural Applications , 2014, RSS 2014.

[9]  Josef Hegger,et al.  Textilbewehrter Beton: Tragverhalten, Bemessung und Anwendung , 2007 .

[10]  Arno Schlueter,et al.  Building information model based energy/exergy performance assessment in early design stages , 2009 .

[11]  C. F. Ng,et al.  Low frequency sound insulation using stiffness control with honeycomb panels , 2008 .

[12]  Jim Euchner.  Design , 2014, Catalysis from A to Z.

[13]  Rakesh K. Kapania,et al.  Design Optimization for Minimum Sound Radiation from Point-Excited Curvilinearly Stiffened Panel , 2009 .

[14]  Prageeth Jayathissa,et al.  The Adaptive Solar Facade: From concept to prototypes , 2016 .

[15]  Arno Schlueter,et al.  Balancing operational and embodied emissions for the energy concept of an experimental research and living unit , 2015 .

[16]  Bjarne W. Olesen,et al.  Ten questions about radiant heating and cooling systems , 2017 .

[17]  G. P. Lydon,et al.  High-resolution analysis for the development of TABS in lightweight structures , 2017 .

[18]  Philippe Block,et al.  Design and Construction of the Mapungubwe National Park Interpretive Centre , South Africa , 2010 .

[19]  Z. Nagy,et al.  THERMAL ANALYSIS OF A MULTIFUNCTIONAL FLOOR ELEMENT , 2016 .

[20]  Abel Groenewolt,et al.  Methods for modelling and analysis of bendable photovoltaic modules on irregularly curved surfaces , 2016 .

[21]  Philippe Block,et al.  Design process for prototype concrete shells using a hybrid cable-net and fabric formwork , 2014 .

[22]  Arno Schlueter,et al.  Coupling energy systems with lightweight structures for a net plus energy building , 2017 .

[23]  Zoltán Nagy,et al.  Parametric analysis and systems design of dynamic photovoltaic shading modules , 2015 .

[24]  Anne Grete Hestnes,et al.  Energy use in the life cycle of conventional and low-energy buildings: A review article , 2007 .

[25]  Anastasios I. Dounis,et al.  Advanced control systems engineering for energy and comfort management in a building environment--A review , 2009 .

[26]  Arno Schlueter,et al.  SoRo-Track: A two-axis soft robotic platform for solar tracking and building-integrated photovoltaic applications , 2016, 2016 IEEE International Conference on Robotics and Automation (ICRA).

[27]  Arno Schlueter,et al.  Occupant centered lighting control for comfort and energy efficient building operation , 2015 .

[28]  Arno Schlueter,et al.  Occupant centered lighting control: A user study on balancing comfort, acceptance, and energy consumption , 2016 .

[29]  Michael Hübler,et al.  The EU Decarbonisation Roadmap 2050: What Way to Walk? , 2013 .

[30]  Prageeth Jayathissa,et al.  Energy Performance of PV Modules as Adaptive Building Shading Systems , 2016 .

[31]  Philippe Block,et al.  Thrust Network Analysis : exploring three-dimensional equilibrium , 2009 .

[32]  Philippe Block,et al.  Controlling the geometry and forces of a hybrid cable-net and fabric formwork for thin concrete shells , 2014 .

[33]  Andrew Liew,et al.  Design, fabrication and testing of a prototype, thin-vaulted, unreinforced concrete floor , 2017 .

[34]  Prageeth Jayathissa,et al.  Numerical Simulation of Energy Performance, and Construction of the Adaptive Solar Façade , 2015 .

[35]  Michael Freeman,et al.  Guastavino vaulting : the art of structural tile , 2010 .

[36]  S. Sorrell,et al.  Making the link: climate policy and the reform of the UK construction industry , 2003 .

[37]  Prageeth Jayathissa,et al.  Optimising building net energy demand with dynamic BIPV shading , 2017 .

[38]  Matthew B. Blaschko,et al.  Externally bonded FRP reinforcement for RC structures , 2001 .

[39]  Arno Schlueter,et al.  Illuminating adaptive comfort:dynamic lighting for the active occupant , 2014 .

[40]  Josef Hegger,et al.  Investigations on the bearing behaviour and application potential of textile reinforced concrete , 2008 .

[41]  Luis Pérez-Lombard,et al.  A review on buildings energy consumption information , 2008 .