A Review of Structural and Thermal Analysis of Traction Motors

Traction motors for hybrid electric powertrains have stringent operational requirements including delivering high torque at low speeds and high power at cruising speeds. They require a wide speed range and high efficiency along with high power density and mechanical robustness. Traction motors and their drives are also expected to deliver superior performance throughout the lifetime of the vehicle. Considering the extreme loading conditions, the motors should be designed for very strict thermal requirements. Therefore, all electromagnetic, mechanical, and thermal variables must be thoroughly addressed in motor design. In this review paper, a summary of current structural and thermal simulation methods applicable for traction motors is presented. Prominent design issues along with appropriate analysis methodologies are explained. In addition, briefcase studies of electromagnetic, structural, and thermal analysis performed at Fiat Chrysler Automobiles (FCA) US LLC are highlighted. A detailed list of references and an analysis road map are also provided to aid practicing engineers and researchers involved in electric machine design.

[1]  Donald Alexander Baker.  A Finite Element Study of Stresses in Stepped Splined Shafts, and Partially Splined Shafts Under Bending, Torsion, and Combined Loadings , 1999 .

[2]  Ali Emadi,et al.  Electric Motors in Electrified Transportation: A step toward achieving a sustainable and highly efficient transportation system , 2014, IEEE Power Electronics Magazine.

[3]  Wonho Kim,et al.  Investigation and Experimental Verification of a Novel Spoke-Type Ferrite-Magnet Motor for Electric-Vehicle Traction Drive Applications , 2014, IEEE Transactions on Industrial Electronics.

[4]  Y.K. Chin,et al.  Transient thermal analysis using both lumped-circuit approach and finite element method of a permanent magnet traction motor , 2004, 2004 IEEE Africon. 7th Africon Conference in Africa (IEEE Cat. No.04CH37590).

[5]  Richard A. Hardin,et al.  Integrated Design of Steel Castings : Case Studies , 2009 .

[6]  M. A. Rahman,et al.  Impacts of interior permanent magnet machine technology for electric vehicles , 2012, 2012 IEEE International Electric Vehicle Conference.

[7]  Liwei Song,et al.  3D thermal analysis of water cooling induction motor used for HEV , 2008, 2008 International Conference on Electrical Machines and Systems.

[8]  Stress-life Diagram (s-n Diagram) , .

[9]  Richard A. Hardin,et al.  Prediction of the Fatigue Life of Cast Steel Containing Shrinkage Porosity , 2009 .

[10]  Andrea Cavagnino,et al.  Evolution and Modern Approaches for Thermal Analysis of Electrical Machines , 2009, IEEE Transactions on Industrial Electronics.

[11]  Thomas M. Jahns,et al.  Mechanical design considerations for conventionally laminated, high-speed, interior PM synchronous machine rotors , 2004 .

[12]  D. Gerling,et al.  Design considerations for rotors with embedded V-shape permanent magnets , 2008, 2008 18th International Conference on Electrical Machines.

[13]  A. Boglietti,et al.  Determination of Critical Parameters in Electrical Machine Thermal Models , 2007 .

[14]  Andrea Cavagnino,et al.  A simplified thermal model for variable speed self cooled industrial induction motor , 2002 .

[15]  Juan A. Tapia,et al.  Design of a Traction Motor With Tooth-Coil Windings and Embedded Magnets , 2014, IEEE Transactions on Industrial Electronics.

[16]  Ali Emadi,et al.  Making the Case for Electrified Transportation , 2015, IEEE Transactions on Transportation Electrification.

[17]  Paul E. Allaire,et al.  Introduction to Rotor Dynamics , 2013 .

[18]  E. G. Strangas,et al.  Thermal analysis of water cooled surface mount permanent magnet electric motor for electric vehicle , 2010, 2010 International Conference on Electrical Machines and Systems.

[19]  Souad Harmand,et al.  Study of the thermal behavior of a synchronous motor with permanent magnets , 2009 .

[20]  D. R. Turner,et al.  Lumped parameter thermal model for electrical machines of TEFC design , 1991 .

[21]  Qi Li,et al.  Development of a High Power Density Motor Made of Amorphous Alloy Cores , 2014, IEEE Transactions on Industrial Electronics.

[22]  Jwo Pan,et al.  Fatigue Testing and Analysis: Theory and Practice , 2004 .

[23]  NICOARA DUMITRU,et al.  Study of Rotor-Bearing Systems Using Campbell Diagram , 2009 .

[24]  Andrea Cavagnino,et al.  Solving the more difficult aspects of electric motor thermal analysis in small and medium size industrial induction motors , 2005 .

[25]  Ju Lee,et al.  Multiobjective Optimal Design for Interior Permanent Magnet Synchronous Motor , 2009 .

[26]  S. H. Loewenthal,et al.  Design of power-transmitting shifts , 1984 .

[27]  Matteo Luca FACCHINETTI,et al.  Taking into account the forming process in fatigue design computations , 2007 .

[28]  Aimeng Wang,et al.  Comparison of Five Topologies for an Interior Permanent-Magnet Machine for a Hybrid Electric Vehicle , 2011, IEEE Transactions on Magnetics.