Cathode–anode side interaction in SOFC hybrid systems

Cathode–anode interaction, mainly based on cathode versus anode volume influence, recirculation performance, and turbomachinery integration, is an important issue for pressurised SOFC hybrid systems, and this aspect must be carefully considered to prevent fuel cell ceramic material failures through a reliable control system. Over the last 10years, several theoretical analyses of this issue have been carried out at the University of Genoa. These interaction studies have been analysed and an experimental approach (for model validation, system development and prototype design activities) has been applied using emulator facilities or real plants. In particular, general hybrid system layouts based on the coupling of pressurized SOFC stacks of different geometries (planar, tubular, etc.) with a gas turbine bottoming cycle have been investigated using the hybrid system emulator facility of the University of Genoa. The experimental results are focused on the interaction between gas turbine and anodic circuit and on cathode–anode differential pressure behaviour for design, off-design and transient hybrid system operative conditions. The information obtained in these tests is essential to understand the main features of the variables that drive the phenomena and to design a suitable control system that can mitigate the differential pressure values during all plant operating conditions.

[1]  David Tucker,et al.  A Study in the Process Modeling of the Startup of Fuel Cell/Gas Turbine Hybrid Systems , 2010 .

[2]  Fabian Mueller,et al.  Dynamic Simulation of an Integrated Solid Oxide Fuel Cell System Including Current-Based Fuel Flow Control , 2005 .

[3]  Aristide F. Massardo,et al.  Micro Gas Turbine Recuperator: Steady-State and Transient Experimental Investigation , 2010 .

[4]  Alberto Traverso,et al.  Generic Real-Time Modeling of Solid Oxide Fuel Cell Hybrid Systems , 2009 .

[5]  Aristide F. Massardo,et al.  Hybrid System Test Rig: Start-up and Shutdown Physical Emulation , 2010 .

[6]  Fabian Mueller,et al.  Dynamic modeling and evaluation of solid oxide fuel cell – combined heat and power system operating strategies , 2009 .

[7]  P. Quirion.  Complying with the Kyoto Protocol Under Uncertainty: Taxes or Tradable Permits? , 2002 .

[8]  Francesco Calise,et al.  Parametric exergy analysis of a tubular Solid Oxide Fuel Cell (SOFC) stack through finite-volume model , 2009 .

[9]  Aristide F. Massardo,et al.  Design and Testing of Ejectors for High Temperature Fuel Cell Hybrid Systems , 2006 .

[10]  Aristide F. Massardo,et al.  Ejector Model for High Temperature Fuel Cell Hybrid Systems: Experimental Validation at Steady-State and Dynamic Conditions , 2008 .

[11]  Ernst Riensche,et al.  Optimization of a 200 kW SOFC cogeneration power plant. Part I: Variation of process parameters , 1998 .

[12]  Manfred Aigner,et al.  Micro Gas Turbine Test Rig for Hybrid Power Plant Application , 2008 .

[13]  Jack Brouwer,et al.  Experimental and theoretical evidence for control requirements in solid oxide fuel cell gas turbine hybrid systems , 2012 .

[14]  Randall Gemmen,et al.  Issues for low-emission, fuel-flexible power systems , 2001 .

[15]  Aristide F. Massardo,et al.  Modeling and Performance Analysis of the Rolls-Royce Fuel Cell Systems Limited: 1 MW Plant , 2011 .

[16]  S. Chou,et al.  Energy solutions for a sustainable world , 2012 .

[17]  Mario L. Ferrari,et al.  Hybrid Simulation Facility Based on Commercial 100 kWe Micro Gas Turbine , 2009 .

[18]  Wayne L. Lundberg,et al.  Tubular Solid Oxide Fuel Cell/Gas Turbine Hybrid Cycle Power Systems: Status , 1999 .

[19]  M. Bozzolo,et al.  The Design and Integration of the Rolls-Royce Fuel Cell Systems 1MW SOFC , 2005 .

[20]  A. F. Massardo.  Internal Reforming Solid Oxide Fuel Cell Gas Turbine Combined Cycles (IRSOFC-GT)—Part II: Exergy and Thermoeconomic Analyses , 2003 .

[21]  Mario L. Ferrari,et al.  Solid oxide fuel cell hybrid system: Control strategy for stand-alone configurations , 2011 .

[22]  Aristide F. Massardo,et al.  Internal Reforming Solid Oxide Fuel Cell-Gas Turbine Combined Cycles (IRSOFC-GT): Part A—Cell Model and Cycle Thermodynamic Analysis , 2000 .

[23]  Alberto Traverso,et al.  Hybrid system test rig: Chemical composition emulation with steam injection , 2012 .

[24]  Bengt Sundén,et al.  Review on modeling development for multiscale chemical reactions coupled transport phenomena in solid oxide fuel cells , 2010 .

[25]  Aristide F. Massardo,et al.  MGT/HTFC Hybrid System Emulator Test Rig: Experimental Investigation on the Anodic Recirculation System , 2011 .

[26]  Eban S. Goodstein.  Economics and the environment , 1995 .

[27]  Loredana Magistri,et al.  Ejector performance influence on a solid oxide fuel cell anodic recirculation system , 2004 .

[28]  Alberto Traverso,et al.  Influence of the anodic recirculation transient behaviour on the SOFC hybrid system performance , 2005 .

[29]  C. F. McDonald.  A Review on Heat Recovery Exchangers for Very Small Engines , 1996 .