Quantitative In Situ Mechanical Characterization of the Effects of Chemical Functionalization on Individual Carbon Nanofibers

Carbon nanofibers (CNFs) have been used for applications in composite material for decades because of their unique mechanical, thermal, and electrical properties. Consequently, an in‐depth understanding of mechanical properties of individual CNFs, particularly after chemical functionalization, would provide important insight into its effective integration into composite materials. Fluorination and amination of CNFs is achieved and systematic chemical characterizations of functionalized CNFs are performed. An in situ tensile testing method, which combines a simple microfabricated device with a quantitative nanoindenter inside a scanning electron microscope (SEM) chamber, is used to measure mechanical properties of individual pristine, fluorinated, and amino‐functionalized CNFs. The nominal CNFs strengths follow the Weibull distribution and the fluorinated CNFs are found to possess higher nominal strength but similar strain when compared with the pristine and amino‐functionalized CNFs. SEM fracture surfaces analysis shows that all nanofibers failed in a similar cup‐and‐cone fashion. Microscopy image sof fluorinated CNFs reveal an unexpected change in the hollow core before and after fiber fracture, which is attributed to the possible effects of fluorination‐induced compression on nanofiber surfaces. The results demonstrate the potential of fluorination for improving both the mechanical properties of CNFs and their successful integration into composites.

[1]  Y. Hayashi,et al.  Determination of Young’s modulus of carbon nanofiber probes fabricated by the argon ion bombardment of carbon coated silicon cantilever , 2011 .

[2]  V. Khabashesku.  Covalent functionalization of carbon nanotubes: synthesis, properties and applications of fluorinated derivatives , 2011 .

[3]  M. Naraghi,et al.  Strong carbon nanofibers from electrospun polyacrylonitrile , 2011 .

[4]  P. Ajayan,et al.  Effect of nitrogen doping on the mechanical properties of carbon nanotubes. , 2010, ACS nano.

[5]  Hao Lu,et al.  Development and Application of a Novel Microfabricated Device for the In Situ Tensile Testing of 1-D Nanomaterials , 2010, Journal of Microelectromechanical Systems.

[6]  Shouheng Sun,et al.  Cold welding of ultrathin gold nanowires. , 2010, Nature nanotechnology.

[7]  Claude A. Klein,et al.  Characteristic strength, Weibull modulus, and failure probability of fused silica glass , 2009 .

[8]  Ji Won Suk,et al.  Microsystem for nanofiber electromechanical measurements , 2009 .

[9]  Jun Ma,et al.  High tensile modulus of carbon nanotube nano-fibers produced by dielectrophoresis , 2009 .

[10]  Darrell H. Reneker,et al.  Development of carbon nanofibers from aligned electrospun polyacrylonitrile nanofiber bundles and characterization of their microstructural, electrical, and mechanical properties , 2009 .

[11]  A. Nadarajah,et al.  Structural transformation of vapor grown carbon nanofibers studied by HRTEM , 2008 .

[12]  A. Nadarajah,et al.  Elastic properties and morphology of individual carbon nanofibers. , 2008, ACS nano.

[13]  Jun Li,et al.  Current-induced breakdown of carbon nanofibers , 2007 .

[14]  V. Khabashesku,et al.  Functionalization of Carbon Nano-onions by Direct Fluorination , 2007 .

[15]  V. Khabashesku,et al.  Chemical Modification of Carbon Nanotubes , 2006 .

[16]  A. Nadarajah,et al.  Structural analysis of conical carbon nanofibers , 2006 .

[17]  Eyal Zussman,et al.  Mechanical and structural characterization of electrospun PAN-derived carbon nanofibers , 2005 .

[18]  D. Srivastava,et al.  Nanomechanics of carbon nanofibers: Structural and elastic properties , 2004 .

[19]  Q. Bao,et al.  Well-aligned carbon nanotubes from ethanol flame , 2002 .

[20]  W. E. Billups,et al.  Fluorination of single-wall carbon nanotubes and subsequent derivatization reactions. , 2002, Accounts of chemical research.

[21]  Gang Gu,et al.  Simple method to prepare individual suspended nanofibers , 2002 .

[22]  M. Dresselhaus,et al.  Vapor-grown carbon fibers (VGCFs): Basic properties and their battery applications , 2001 .

[23]  Linda S. Schadler,et al.  LOAD TRANSFER IN CARBON NANOTUBE EPOXY COMPOSITES , 1998 .

[24]  Arthur J. Hallinan.  A Review of the Weibull Distribution , 1993 .

[25]  Jun Lou,et al.  A Multi-step Method for In Situ Mechanical Characterization of 1-D Nanostructures Using a Novel Micromechanical Device , 2010 .

[26]  M. Naraghi,et al.  Mechanical properties of vapor grown carbon nanofibers , 2010 .

[27]  P. Mangonon,et al.  The principles of materials selection for engineering design , 1998 .

[28]  K. J. Hüttinger,et al.  Carbon fibers, filaments, and composites , 1990 .

[29]  Erich Fitzer,et al.  Carbon fibres and their composites , 1985 .

[30]  R. Lagow,et al.  Some new synthetic approaches to graphite–fluorine chemistry , 1974 .