Efficient Quaternary Organic Solar Cells with Parallel‐Alloy Morphology

Two compatible donors (PBDB‐T and PTB7‐Th) and two miscible acceptors (ITIC and FOIC) are employed to deliver a parallel‐alloy morphology model in non‐fullerene‐based quaternary organic solar cells. PBDB‐T and PTB7‐Th form a parallel link with a slight adjustment of molecular packing into enhanced face‐on crystallites while ITIC disperses into discontinuous FOIC microcrystal regions to form continuous and ordered alloy‐like acceptor phases. Characterization of blend morphology highlights the parallel‐alloy model—enabled by the introduction of PBDB‐T and ITIC, which contributes to improved molecular packing and reduced domain size resulting in efficient charge generation and consistent transport channels. This successful parallel‐alloy quaternary blend morphology demonstrates an enhanced optical absorption, optimized domain size, and nanostructures toward simultaneous improvement in charge transfer and transport. Therefore, a power conversion efficiency of 12.52% is realized for a quaternary device which is 6% higher than the ternary device (PBDB‐T:PTB7‐Th:FOIC) and 12% higher than the binary device (PTB7‐Th:FOIC). Domination of quaternary devices over ternary and binary blends, which is another feasible way to realize highly efficient devices through further investigation of quaternary OSCs, is presented.

[1]  P. Maillard,et al.  Energy Transfer , 2021, Radial Flow Turbocompressors.

[2]  A. Jen,et al.  Ternary non-fullerene polymer solar cells with 13.51% efficiency and a record-high fill factor of 78.13% , 2018 .

[3]  Runnan Yu,et al.  Recent Progress in Ternary Organic Solar Cells Based on Nonfullerene Acceptors , 2018 .

[4]  W. Sha,et al.  A comprehensively theoretical and experimental study of carrier generation and transport for achieving high performance ternary blend organic solar cells , 2018, Nano Energy.

[5]  Z. Tang,et al.  A Highly Efficient Non‐Fullerene Organic Solar Cell with a Fill Factor over 0.80 Enabled by a Fine‐Tuned Hole‐Transporting Layer , 2018, Advanced materials.

[6]  H. Yao,et al.  Toward Efficient Polymer Solar Cells Processed by a Solution‐Processed Layer‐By‐Layer Approach , 2018, Advanced materials.

[7]  Olle Inganäs,et al.  Organic Photovoltaics over Three Decades , 2018, Advanced materials.

[8]  C. Brabec,et al.  Robust nonfullerene solar cells approaching unity external quantum efficiency enabled by suppression of geminate recombination , 2018, Nature Communications.

[9]  Stephen R. Forrest,et al.  High fabrication yield organic tandem photovoltaics combining vacuum- and solution-processed subcells with 15% efficiency , 2018 .

[10]  Fujun Zhang,et al.  Efficient ternary non-fullerene polymer solar cells with PCE of 11.92% and FF of 76.5% , 2018 .

[11]  Frédéric Laquai,et al.  Impact of Nonfullerene Acceptor Core Structure on the Photophysics and Efficiency of Polymer Solar Cells , 2018 .

[12]  H. Ade,et al.  Multiple Cases of Efficient Nonfullerene Ternary Organic Solar Cells Enabled by an Effective Morphology Control Method , 2018 .

[13]  W. Ma,et al.  Fused Tris(thienothiophene)‐Based Electron Acceptor with Strong Near‐Infrared Absorption for High‐Performance As‐Cast Solar Cells , 2018, Advanced materials.

[14]  Yang Yang,et al.  Ternary System with Controlled Structure: A New Strategy toward Efficient Organic Photovoltaics , 2018, Advanced materials.

[15]  Xiangwei Zhu,et al.  From Alloy-Like to Cascade Blended Structure: Designing High-Performance All-Small-Molecule Ternary Solar Cells. , 2018, Journal of the American Chemical Society.

[16]  W. Choy,et al.  Highly Efficient Ternary‐Blend Polymer Solar Cells Enabled by a Nonfullerene Acceptor and Two Polymer Donors with a Broad Composition Tolerance , 2017, Advanced materials.

[17]  Liming Ding,et al.  Ternary organic solar cells offer 14% power conversion efficiency. , 2017, Science bulletin.

[18]  Christoph J. Brabec,et al.  Washing away barriers , 2017 .

[19]  H. Yao,et al.  Two Well‐Miscible Acceptors Work as One for Efficient Fullerene‐Free Organic Solar Cells , 2017, Advanced materials.

[20]  Changduk Yang,et al.  Locking-In Optimal Nanoscale Structure Induced by Naphthalenediimide-Based Polymeric Additive Enables Efficient and Stable Inverted Polymer Solar Cells. , 2017, ACS nano.

[21]  Runnan Yu,et al.  Design, Synthesis, and Photovoltaic Characterization of a Small Molecular Acceptor with an Ultra-Narrow Band Gap. , 2017, Angewandte Chemie.

[22]  C. J. M. Emmott,et al.  Reducing the efficiency-stability-cost gap of organic photovoltaics with highly efficient and stable small molecule acceptor ternary solar cells. , 2017, Nature materials.

[23]  Changduk Yang,et al.  Ternary solar cells with a mixed face-on and edge-on orientation enable an unprecedented efficiency of 12.1% , 2017 .

[24]  Il Ki Han,et al.  Long-term efficient organic photovoltaics based on quaternary bulk heterojunctions , 2017, Nature Communications.

[25]  H. Ade,et al.  Panchromatic Sequentially Cast Ternary Polymer Solar Cells , 2017, Advanced materials.

[26]  C. Brabec,et al.  Designing ternary blend bulk heterojunction solar cells with reduced carrier recombination and a fill factor of 77% , 2016, Nature Energy.

[27]  Jianqi Zhang,et al.  Optimized “Alloy‐Parallel” Morphology of Ternary Organic Solar Cells , 2016 .

[28]  Morteza Eslamian,et al.  Progress in emerging solution-processed thin film solar cells – Part II: Perovskite solar cells , 2016 .

[29]  Fujun Zhang,et al.  Versatile ternary organic solar cells: a critical review , 2016 .

[30]  Bumjoon J. Kim,et al.  Charge Generation Dynamics in Efficient All-Polymer Solar Cells: Influence of Polymer Packing and Morphology. , 2015, ACS applied materials & interfaces.

[31]  Cheng Wang,et al.  Flexible, highly efficient all-polymer solar cells , 2015, Nature Communications.

[32]  Stephanie J. Benight,et al.  Impact of the Crystallite Orientation Distribution on Exciton Transport in Donor-Acceptor Conjugated Polymers. , 2015, ACS applied materials & interfaces.

[33]  A. Heeger,et al.  Polymer–Polymer Förster Resonance Energy Transfer Significantly Boosts the Power Conversion Efficiency of Bulk‐Heterojunction Solar Cells , 2015, Advanced materials.

[34]  Jianqi Zhang,et al.  Conjugated Polymer-Small Molecule Alloy Leads to High Efficient Ternary Organic Solar Cells. , 2015, Journal of the American Chemical Society.

[35]  Wei Chen,et al.  High-performance ternary blend polymer solar cells involving both energy transfer and hole relay processes , 2015, Nature Communications.

[36]  Yang Yang,et al.  High-performance multiple-donor bulk heterojunction solar cells , 2015, Nature Photonics.

[37]  Fujun Zhang,et al.  Simultaneous improvement in short circuit current, open circuit voltage, and fill factor of polymer solar cells through ternary strategy. , 2015, ACS applied materials & interfaces.

[38]  Daoben Zhu,et al.  An Electron Acceptor Challenging Fullerenes for Efficient Polymer Solar Cells , 2015, Advanced materials.

[39]  M. Lee,et al.  Coevaporated bisquaraine inverted solar cells: Enhancement due to energy transfer and open circuit voltage control , 2015 .

[40]  Der-Jang Liaw,et al.  A bifunctional copolymer additive to utilize photoenergy transfer and to improve hole mobility for organic ternary bulk-heterojunction solar cell. , 2014, ACS applied materials & interfaces.

[41]  M. Toney,et al.  Effect of Backbone Regioregularity on the Structure and Orientation of a Donor–Acceptor Semiconducting Copolymer , 2014 .

[42]  Yu-Shan Cheng,et al.  Fullerene Derivative‐Doped Zinc Oxide Nanofilm as the Cathode of Inverted Polymer Solar Cells with Low‐Bandgap Polymer (PTB7‐Th) for High Performance , 2013, Advanced materials.

[43]  A. Heeger,et al.  Improved light harvesting and improved efficiency by insertion of an optical spacer (ZnO) in solution-processed small-molecule solar cells. , 2013, Nano letters.

[44]  Matthew Y. Sfeir,et al.  Polymer bulk heterojunction solar cells employing Förster resonance energy transfer , 2013, Nature Photonics.

[45]  C. Nuckolls,et al.  Post-deposition processing methods to induce preferential orientation in contorted hexabenzocoronene thin films. , 2013, ACS nano.

[46]  Robert A. Street,et al.  Origin of the tunable open-circuit voltage in ternary blend bulk heterojunction organic solar cells. , 2013, Journal of the American Chemical Society.

[47]  John R. Tumbleston,et al.  Absolute Measurement of Domain Composition and Nanoscale Size Distribution Explains Performance in PTB7:PC71BM Solar Cells , 2013 .

[48]  Jianhui Hou,et al.  Design, Application, and Morphology Study of a New Photovoltaic Polymer with Strong Aggregation in Solution State , 2012 .

[49]  S. Mannsfeld,et al.  Quantitative determination of organic semiconductor microstructure from the molecular to device scale. , 2012, Chemical reviews.

[50]  A. Hexemer,et al.  Soft x-ray scattering facility at the Advanced Light Source with real-time data processing and analysis. , 2012, The Review of scientific instruments.

[51]  Yong Cao,et al.  Simultaneous Enhancement of Open‐Circuit Voltage, Short‐Circuit Current Density, and Fill Factor in Polymer Solar Cells , 2011, Advanced materials.

[52]  B. Thompson,et al.  Efficient ternary blend bulk heterojunction solar cells with tunable open-circuit voltage. , 2011, Journal of the American Chemical Society.

[53]  U. Lemmer,et al.  Effect of Photovoltaic Polymer/Fullerene Blend Composition Ratio on Microstructure Evolution during Film Solidification Investigated in Real Time by X-ray Diffraction , 2011 .

[54]  Robert A. Street,et al.  Transient photoconductivity in polymer bulk heterojunction solar cells: Competition between sweep-out and recombination , 2011 .

[55]  Alan J. Heeger,et al.  Recombination in polymer-fullerene bulk heterojunction solar cells , 2010 .

[56]  Howard A. Padmore,et al.  A SAXS/WAXS/GISAXS Beamline with Multilayer Monochromator , 2010 .

[57]  Vivek Subramanian,et al.  Quantification of thin film crystallographic orientation using X-ray diffraction with an area detector. , 2010, Langmuir : the ACS journal of surfaces and colloids.

[58]  B. de Boer,et al.  Effect of traps on the performance of bulk heterojunction organic solar cells , 2007 .

[59]  V. Mihailetchi,et al.  Photocurrent generation in polymer-fullerene bulk heterojunctions. , 2004, Physical review letters.

[60]  Christoph J. Brabec,et al.  Recombination and loss analysis in polythiophene based bulk heterojunction photodetectors , 2002 .