Condition monitoring of engine load using a new model based on adaptive neuro fuzzy inference system (ANFIS)

[1]  N. R. Sakthivel,et al.  Evaluation of expert system for condition monitoring of a single point cutting tool using principle component analysis and decision tree algorithm , 2011, Expert Syst. Appl..

[2]  Serge Guillaume,et al.  Designing fuzzy inference systems from data: An interpretability-oriented review , 2001, IEEE Trans. Fuzzy Syst..

[3]  Zahra Hashemiyan,et al.  A signal pre-processing algorithm designed for the needs of hardware implementation of neural classifiers used in condition monitoring , 2015 .

[4]  V. Sugumaran,et al.  Rough set based rule learning and fuzzy classification of wavelet features for fault diagnosis of monoblock centrifugal pump , 2013 .

[5]  Mukesh Saxena,et al.  Artificial Neural Networks for Internal Combustion Engine Performance and Emission Analysis , 2014 .

[6]  Hamid Mehdigholi,et al.  Investigation of the relationship between engine valve leakage and acoustic emission measured on the cylinder head ignoring combustion effects , 2016 .

[7]  Leila Naderloo,et al.  Modeling the energy ratio and productivity of biodiesel with different reactor dimensions and ultrasonic power using ANFIS , 2017 .

[8]  Yusuf Çay,et al.  Prediction of a gasoline engine performance with artificial neural network , 2013 .

[9]  Buyung Kosasih,et al.  Acoustic emission-based condition monitoring methods: Review and application for low speed slew bearing , 2016 .

[10]  Jianping Xuan,et al.  Application of a modified fuzzy ARTMAP with feature-weight learning for the fault diagnosis of bearing , 2009, Expert Syst. Appl..

[11]  A. Rohani,et al.  Modeling of specific fuel consumption and emission parameters of compression ignition engine using nanofluid combustion experimental data , 2016 .

[12]  Lino Guzzella,et al.  Optimal energy management for a diesel hybrid electric vehicle considering transient PM and quasi-static NOx emissions , 2014 .

[13]  Ahmad Lotfi,et al.  Condition monitoring of helical gears using automated selection of features and sensors , 2016 .

[14]  Thierry Marie Guerra,et al.  Robust Takagi–Sugeno fuzzy control of a spark ignition engine , 2007 .

[15]  Alexander Stotsky.  Adaptive Estimation of the Engine Friction Torque , 2005, Proceedings of the 44th IEEE Conference on Decision and Control.

[16]  Igor Svrkota,et al.  Risk assessment model of mining equipment failure based on fuzzy logic , 2014, Expert Syst. Appl..

[17]  Ahmed El Hajjaji,et al.  Unknown input estimation for diesel engine based on Takagi-Sugeno Fuzzy Descriptor systems , 2014, 2014 American Control Conference.

[18]  Zhiguo Zhao,et al.  Estimation of torque transmitted by clutch during shifting process for dry dual clutch transmission , 2016 .

[19]  Myeongsu Kang,et al.  Robust condition monitoring of rolling element bearings using de-noising and envelope analysis with signal decomposition techniques , 2015, Expert Syst. Appl..

[20]  Bingang Xu.  Intelligent fault inference for rotating flexible rotors using Bayesian belief network , 2012, Expert Syst. Appl..

[21]  Shunming Li,et al.  A dual path optimization ridge estimation method for condition monitoring of planetary gearbox under varying-speed operation , 2016 .

[22]  Feilong Liu,et al.  An Experimental Study on Engine Dynamics Model Based In-Cylinder Pressure Estimation , 2012 .

[23]  Samad Jafarmadar,et al.  Experimental and numerical consideration of the effect of CeO2 nanoparticles on diesel engine performance and exhaust emission with the aid of artificial neural network , 2017 .

[24]  Maurice Kettner,et al.  SVM and ANFIS for prediction of performance and exhaust emissions of a SI engine with gasoline-ethanol blended fuels , 2016 .

[25]  Karolos M. Grigoriadis,et al.  Real-time brake torque estimation for internal combustion engines , 2008 .

[26]  Junichi Furuya,et al.  Estimation of Engine Torque and Cylinder Pressure Index Based on Crankshaft Rotation Measurement , 2013 .

[27]  Sedat Bayseç,et al.  Nonlinear identification of a spark ignition engine torque based on ANFIS with NARX method , 2016, Expert Syst. J. Knowl. Eng..

[28]  S. V. Channapattana,et al.  Optimisation of operating parameters of DI-CI engine fueled with second generation Bio-fuel and development of ANN based prediction model , 2017 .

[29]  Tolgay Kara,et al.  Nonlinear modeling and identification of a spark ignition engine torque , 2012 .

[30]  Umberto Desideri,et al.  Experimental investigation of a diesel engine power, torque and noise emission using water–diesel emulsions , 2016 .

[31]  Rizalman Mamat,et al.  Prediction of Marine Diesel Engine Performance by Using Artificial Neural Network Model , 2016 .

[32]  Ismail Saritas,et al.  Prediction of diesel engine performance using biofuels with artificial neural network , 2010, Expert Syst. Appl..

[33]  Dariusz Dabrowski,et al.  Condition monitoring of planetary gearbox by hardware implementation of artificial neural networks , 2016 .

[34]  Shahaboddin Shamshirband,et al.  Support vector machine-based exergetic modelling of a DI diesel engine running on biodiesel–diesel blends containing expanded polystyrene , 2016 .

[35]  Kadir Aydin,et al.  Comparison of linear regression and artificial neural network model of a diesel engine fueled with biodiesel-alcohol mixtures , 2016 .

[36]  Richard Edwin Sonntag,et al.  Fundamentals of Thermodynamics , 1998 .

[37]  Ahmad Saifizul,et al.  Empirical investigation of acoustic emission signals for valve failure identification by using statistical method , 2014 .

[38]  W. Y. Liu,et al.  The structure healthy condition monitoring and fault diagnosis methods in wind turbines: A review , 2015 .

[39]  N. Khanjani,et al.  Driver exposure and environmental noise emission of Massey Ferguson 285 tractor during operations with different engine speeds and gears , 2013 .

[40]  Zhang Zengmeng,et al.  Extraction of fault component from abnormal sound in diesel engines using acoustic signals , 2016 .

[41]  Julian F Dunne,et al.  Engine cylinder pressure reconstruction using crank kinematics and recurrently-trained neural networks , 2017 .

[42]  Yaguo Lei,et al.  Condition monitoring and fault diagnosis of planetary gearboxes: A review , 2014 .

[43]  Yann Chamaillard,et al.  A simple method for robust control design, application on a non-linear and delayed system: engine torque control , 2004 .

[44]  Lin Ma,et al.  Estimating the Loading Condition of a Diesel Engine Using Instantaneous Angular Speed Analysis , 2011, WCE 2011.

[45]  Sedat Bayseç,et al.  Prediction of torque and specific fuel consumption of a gasoline engine by using artificial neural networks , 2010 .

[46]  Diego Cabrera,et al.  Gearbox fault diagnosis based on deep random forest fusion of acoustic and vibratory signals , 2016 .

[47]  Alain Rakotomamonjy,et al.  A comparison of statistical learning approaches for engine torque estimation , 2008 .

[48]  Mustafa Canakci,et al.  Prediction of performance and exhaust emissions of a diesel engine fueled with biodiesel produced from waste frying palm oil , 2009, Expert Syst. Appl..

[49]  Imtiaz Ahmed Choudhury,et al.  Application of acoustic emission sensor to investigate the frequency of tool wear and plastic deformation in tool condition monitoring , 2016 .

[50]  Bo-Suk Yang,et al.  Acoustic emission for diesel engine monitoring: A review and preliminary , 2011, WCE 2011.

[51]  José D. Martínez-Morales,et al.  Modeling of internal combustion engine emissions by LOLIMOT algorithm , 2012 .

[52]  Abbas Rohani,et al.  Prediction of tractor repair and maintenance costs using Artificial Neural Network , 2011, Expert Syst. Appl..

[53]  Yu Jiang,et al.  Recent progress on decoupling diagnosis of hybrid failures in gear transmission systems using vibration sensor signal: A review , 2016 .

[54]  José Luís Calvo-Rolle,et al.  Expert condition monitoring on hydrostatic self-levitating bearings , 2013, Expert Syst. Appl..

[55]  Thierry Marie Guerra,et al.  Transmitted torque observer applied to real time engine and clutch torque estimation , 2015 .

[56]  Seibum B. Choi,et al.  Driveline modeling and estimation of individual clutch torque during gear shifts for dual clutch transmission , 2014 .

[57]  Yousef Abbaspour-Gilandeh,et al.  Artificial Neural Network and stepwise multiple range regression methods for prediction of tractor fuel consumption , 2011 .

[58]  Indrajit Mukherjee,et al.  Comparing the performance of neural networks developed by using Levenberg-Marquardt and Quasi-Newton with the gradient descent algorithm for modelling a multiple response grinding process , 2012, Expert Syst. Appl..

[59]  Erhan Akdoğan,et al.  Prediction of emissions and exhaust temperature for direct injection diesel engine with emulsified fuel using ANN , 2013 .

[60]  Chuanlei Yang,et al.  Investigation of ANN and SVM based on limited samples for performance and emissions prediction of a CRDI-assisted marine diesel engine , 2017 .

[61]  R. Trigui,et al.  Predictive energy management of hybrid vehicle , 2008, 2008 IEEE Vehicle Power and Propulsion Conference.

[62]  R M Douglas,et al.  On-line power estimation of large diesel engines using acoustic emission and instantaneous crankshaft angular velocity , 2006 .

[63]  Jian-Da Wu,et al.  Investigation of engine fault diagnosis using discrete wavelet transform and neural network , 2008, Expert Syst. Appl..

[64]  Feng Lin,et al.  A novel optimal support vector machine ensemble model for NOX emissions prediction of a diesel engine , 2016 .

[65]  Talal Yusaf,et al.  Diesel engine performance and exhaust gas emissions using Microalgae Chlorella protothecoides biodiesel , 2017 .

[66]  Mustapha Ouladsine,et al.  Neural modelling and control of a Diesel engine with pollution constraints , 2005, J. Intell. Robotic Syst..

[67]  Jian Zhang,et al.  Fuzzy modeling of diesel engine based on working position , 2012, 2012 International Conference on System Science and Engineering (ICSSE).