An overview of active load control techniques for wind turbines with an emphasis on microtabs

This paper outlines the benefits and challenges of utilizing active flow control (AFC) for wind turbines. The goal of AFC is to mitigate damaging loads and control the aeroelastic response of wind turbine blades. This can be accomplished by sensing changes in turbine operation and activating devices to adjust the sectional lift coefficient and/or local angle of attack. Fifteen AFC devices are introduced, and four are described in more detail. Non-traditional trailing-edge flaps, plasma actuators, vortex generator jets and microtabs are examples of devices that hold promise for wind turbine control. The microtab system is discussed in further detail including recent experimental results demonstrating its effectiveness in a three-dimensional environment. Wind tunnel tests indicated that a nearly constant change in CL over a wide range of angles of attack is possible with microtab control. Using an angle of attack of 5 degrees as a reference, microtabs with a height of 1.5%c were capable of increasing CL by +0.21 (37%) and decreasing CL by −0.23 (−40%). The results are consistent with findings from past two-dimensional experiments and numerical efforts. Through comparisons to other load control studies, the controllable range of this microtab system is determined to be suitable for smart blade applications. Copyright © 2009 John Wiley & Sons, Ltd.

[1]  Hamid Johari,et al.  VISUALIZATION OF PULSED VORTEX GENERATOR JETS FOR ACTIVE CONTROL OF BOUNDARY LAYER SEPARATION , 1997 .

[2]  David H. Wolpert,et al.  Flight Control with Distributed Efiectors , 2005 .

[3]  Ron Barrett,et al.  Subsonic Aerodynamics and Performance of a Smart Vortex Generator System , 1996 .

[4]  S. Oerlemans.  Wind Tunnel Aeroacoustic Tests of Six Airfoils for Use on Small Wind Turbines; Period of Performance: August 23, 2002 through March 31, 2004 , 2004 .

[5]  Sumon K. Sinha,et al.  Flow Separation Control with Microflexural Wall Vibrations , 2001 .

[6]  Jean-Paul Bonnet,et al.  Airfoil Performance enhancement using fluidic actuators , 2007 .

[7]  C. P. van Dam,et al.  Computational Analysis of a Microtab-Based Aerodynamic Load Control System for Rotor Blades , 2005 .

[8]  T. D. Ashwill.  Blade Manufacturing Improvements Development of the ERS-100 Blade Final Project Report , 2001 .

[9]  G.A.M. van Kuik,et al.  State of the art and prospectives of smart rotor control for wind turbines , 2007 .

[10]  D. A. Griffin,et al.  COE Reductions through Active Aerodynamic Control of Rotor Aerodynamics and Geometry , 2008 .

[11]  John Magill,et al.  Exploring the Feasibility of Pulsed Jet Separation Control for Aircraft Configurations , 2001 .

[12]  Raymond Chow,et al.  Computational Investigations of Small Deploying Tabs and Flaps for Aerodynamic Load Control , 2007 .

[13]  L. S. Miller,et al.  Atmospheric tests of trailing-edge aerodynamic devices , 1998 .

[14]  Lakshmi N. Sankar,et al.  Numerical Studies of the Effects of Active and Passive Circulation Enhancement Concepts on Wind Turbine Performance , 2006 .

[15]  Ilan Kroo,et al.  Computational Investigation of Wings with Miniature Trailing Edge Control Surfaces , 2004 .

[16]  Scott J. Johnson,et al.  Active load control techniques for wind turbines. , 2008 .

[17]  Nan Jou Pern,et al.  Characterization of Zero Mass Flux Flow Control for Separation Control of an Adaptive Airfoil , 2006 .

[18]  Robert J. Englar,et al.  Circulation Control Pneumatic Aerodynamics: Blown Force and Moment Augmentation and Modification; Pa , 2000 .

[19]  Sridhar Kota,et al.  Active Flow Control Using High-Frequency Compliant Structures , 2004 .

[20]  Carl P. Tilmann,et al.  Design and application of compliant mechanisms for morphing aircraft structures , 2003, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[21]  Jamey Jacob,et al.  Flow control with plasma synthetic jet actuators , 2007 .

[22]  Thomas C. Corke,et al.  Overview of Plasma Flow Control: Concepts, Optimization, and Applications , 2005 .

[23]  Richard M. Wood,et al.  A Discussion of Aerodynamic Control Effectors (ACEs) for Unmanned Air Vehicles (UAVs) , 2002 .

[24]  C. P. van Dam,et al.  Active Aerodynamic Load Control of Wind Turbine Blades. , 2007 .

[25]  Mac Gaunaa,et al.  Wind tunnel test on wind turbine airfoil with adaptive trailing edge geometry , 2007 .

[26]  Kevin Standish,et al.  Two-Dimensional Wind Tunnel and Computational Investigation of a Microtab Modified Airfoil , 2005 .

[27]  Jamey Jacob,et al.  Active Control of Separation on a Wing with Oscillating Camber , 2002 .

[28]  Dieter Roth,et al.  Active rotor control by flaps for vibration reduction - Full scale demonstrator and first flight test results , 2006 .

[29]  John C. Lin,et al.  Review of research on low-profile vortex generators to control boundary-layer separation , 2002 .

[30]  Thomas Corke,et al.  Plasma Flow Control Optimized Airfoil , 2005 .

[31]  S. H. Hinton,et al.  Application of Boundary Layer Control to Rotor Blades , 1957 .

[32]  L. D. Krai,et al.  ACTIVE FLOW CONTROL APPLIED TO AN AIRFOIL , 1998 .

[33]  Sumon K. Sinha,et al.  Controlling Dynamic Stall with an Active Flexible Wall , 2004 .

[34]  R. Liebeck.  Design of Subsonic Airfoils for High Lift , 1976 .

[35]  Inderjit Chopra,et al.  Review of State of Art of Smart Structures and Integrated Systems , 2002 .

[36]  Lakshmi N. Sankar,et al.  Computational Evaluation of the Steady and Pulsed Jet Effects on the Performance of a Circulation Control Wing Section , 2004 .

[37]  Paul S. Veers,et al.  Load Mitigation with Bending/Twist-coupled Blades on Rotors using Modern Control Strategies , 2003 .

[38]  Stefan Oerlemans,et al.  Wind Tunnel Aeroacoustic Tests of Six Airfoils for Use on Small Wind Turbines: Preprint , 2003 .

[39]  Charles P. Butterfield,et al.  Considerations for an Integrated Wind Turbine Controls Capability at the National Wind Technology Center: An Aileron Control Case Study for Power Regulation and Load Mitigation , 1996 .

[40]  Eric Moreau,et al.  Airflow control by non-thermal plasma actuators , 2007 .

[41]  James P. Johnston,et al.  Vortex Generator Jets—Means for Flow Separation Control , 1990 .

[42]  Christian Bak,et al.  Potential load reduction using airfoils with variable trailing edge geometry , 2005 .

[43]  Scott D. Collins,et al.  Active Load Control for Airfoils using Microtabs , 2001 .

[44]  I. Wygnanski,et al.  Active separation control: an overview of Reynolds and Mach numbers effects , 2004 .

[45]  C. P. van Dam,et al.  Computational Investigation of Finite Width Microtabs for Aerodynamic Load Control , 2005 .

[46]  Raymond Chow,et al.  Computational Investigations of Deploying Load Control Microtabs on a Wind Turbine Airfoil , 2007 .

[47]  Michel Verhaegen,et al.  On the proof of concept of a ‘Smart’ wind turbine rotor blade for load alleviation , 2008 .