The behaviour of masonry walls subjected to fire: Modelling and parametrical studies in the case of hollow burnt-clay bricks

A thermo-mechanical model is adopted in order to investigate the fire behaviour of clay masonry walls. In this analysis, conductive, convective and radiative thermal transfers are considered together with local energy consumption due to phase changes. These latter are essentially initiated by both the vaporisation of adsorbed water and the chemical transformation of clay under rising temperatures. Therefore, experimental tests at both the material scale and the brick scale are performed in order to identify the parameters that characterise the thermo-hygral behaviour of clay. For this purpose, numerical simulations are carried out on the experimentally tested hollow bricks in order to determine by back analysis these material parameters. The thermal model being validated, the thermo-mechanical behaviour of a masonry wall subjected to fire, is thereafter investigated by adopting a full three-dimensional finite-element analysis. Numerical simulations results are compared to the experimentally measured ones in terms of both temperature and out-of plane displacement fields. In this analysis, it is shown that a non-linear elastic behaviour for bricks and mortar with temperature-dependent mechanical parameters is sufficient to retrieve the overall behaviour of thin masonry walls. Finally, a parametric study provides the influence of each material parameter on the fire behaviour of the partition walls.

[1]  Jean Crabol.  Transfert de chaleur , 1989 .

[2]  G. A. Khoury,et al.  Mechanical Properties of Hardened Cement Paste Exposed to Temperatures up to 700 C (1292 F) , 1990 .

[3]  Philippe Boch,et al.  Elastic modulus changes in cementitious materials submitted to thermal treatments up to 1000°C , 2002 .

[4]  Bernhard A. Schrefler,et al.  Modelling of hygro-thermal behaviour of concrete at high temperature with thermo-chemical and mechanical material degradation , 2003 .

[5]  Ali Nadjai,et al.  Finite element modelling of compartment masonry walls in fire , 2003 .

[6]  Robert Černý,et al.  THERMAL AND HYGRIC PROPERTIES OF PORTLAND CEMENT MORTAR AFTER HIGH-TEMPERATURE EXPOSURE COMBINED WITH COMPRESSIVE STRESS , 2003 .

[7]  Frédéric Alain Grondin,et al.  Modélisation multi-échelles du comportement thermo-hydro-mécanique des matériaux hétérogènes. Applications aux matériaux cimentaires sous sollicitations sévères. , 2005 .

[8]  John W. Bull.  Computational modelling of masonry, brickwork and blockwork structures , 2001 .

[9]  Leyla Dokuzer Öztürk,et al.  COMPRESSIVE STRENGTH-COLOR CHANGE RELATION IN MORTARS AT HIGH TEMPERATURE , 2004 .

[10]  S. K. Rhee,et al.  Porosity—Thermal conductivity correlations for ceramic materials , 1975 .

[11]  M. Pinar Mengüç,et al.  Thermal Radiation Heat Transfer , 2020 .

[12]  Mehmet Sait Cülfik,et al.  Effect of elevated temperatures on the residual mechanical properties of high-performance mortar , 2002 .

[13]  Ali Alnajim.  Modélisation et simulation du comportement du béton sous hautes températures par une approche thermo-hygro-mécanique couplée : application à des situations accidentelles , 2004 .