Survivability of steel frame structures subject to blast and fire

Abstract The lesson learned from the terrorist attacks on buildings is the need to assure structures’ ability to sustain local damage without total collapse. Some of the terrorist attacks take the form of blast followed by fire which may cause catastrophic failure of the structure. This paper presents a numerical model for analyzing steel frame structures subject to localized damage caused by blast load and subsequently investigating their survivability under fire attack. The proposed numerical method adopts a mixed-element approach for modeling large-scale framework and it is proven to be sufficiently accurate for capturing the detailed behaviour of member and frame instability associated with the effects of high-strain rate and fire temperature. Design implications related to the use of various numerical models for separate assessment of blast and fire resistance of steel structures and their components are discussed. Fire–blast interaction diagrams are generated to determine the fire resistance of columns considering the initial damage caused by the blast loads. A multi-storey steel building frame is analyzed so that the complex interaction effects of blast and fire can be understood and quantified. The frame is found to be vulnerable, as it possesses little fire resistance due to the deformation of key structural elements caused by the high blast load.

[1]  Hong Chen,et al.  EXPLOSION AND FIRE ANALYSIS OF STEEL FRAMES USING FIBER ELEMENT APPROACH , 2004 .

[2]  Jack C. McCormac.  Structural Steel Design , 1981 .

[3]  F. E. Lakey.  Providence, R. I , 1906 .

[4]  W. F. Chen,et al.  Improved nonlinear plastic hinge analysis of space frame structures , 2000 .

[5]  M. Bassim,et al.  High strain rate effects on the strain of alloy steels , 1999 .

[6]  M. P. Byfield.  Behavior and Design of Commercial Multistory Buildings Subjected to Blast , 2006 .

[7]  J. Y. Richard Liew,et al.  Advanced analysis of 3D steel framework exposed to compartment fire , 2004 .

[8]  Amr S. Elnashai,et al.  An integrated adaptive environment for fire and explosion analysis of steel frames — Part II:: verification and application , 2000 .

[9]  Theodor Krauthammer.  Blast-resistant structural steel connections , 1998 .

[10]  Norval Dobbs,et al.  Structures to Resist the Effects of Accidential Explosions. Volume 4. Reinforced Concrete Design , 1987 .

[11]  B. A. Izzuddin,et al.  Rate-sensitive analysis of framed structures Part I: model formulation and verification , 1997 .

[12]  W. E. Baker,et al.  Energy Solutions for Predicting Deformations in Blast-Loaded Structures , 1975 .

[13]  Samuel Weissman,et al.  Elastic and Elasto-Plastic Computerized Dynamic Analysis of Frame Structures Subjected to Blast Overpressure , 1976 .

[14]  Hong Chen,et al.  Explosion and Fire Analysis of Steel Frames Using Mixed Element Approach , 2005 .

[15]  Joel Kruppa,et al.  Collapse Temperature of Steel Structures , 1979 .

[16]  Samuel Weissman,et al.  Nonlinear Analysis of Frame Structures Subjected to Blast Overpressures , 1977 .

[17]  John Hetherington,et al.  Blast and ballistic loading of structures , 1994 .

[18]  János Lógó,et al.  Optimal design of elasto-plastic structures subjected to normal and extreme loads , 2006 .

[19]  Norval Dobbs,et al.  Structures to Resist the Effects of Accidental Explosions. Volume 5. Structural Steel Design , 1987 .

[20]  Glenn Randers-Pehrson,et al.  Airblast Loading Model for DYNA2D and DYNA3D. , 1997 .

[21]  S. Chan,et al.  Refined plastic hinge analysis of steel frames under fire , 2001 .

[22]  Yngve Anderberg,et al.  Modelling Steel Behaviour , 1988 .

[23]  Zhaohui Huang,et al.  Three-Dimensional Analysis of Composite Steel-Framed Buildings in Fire , 2000 .

[24]  L. K. Tang,et al.  Advanced analysis for the assessment of steel frames in fire , 1998 .

[25]  J. Y. Richard Liew,et al.  Direct analysis for performance-based design of steel and composite structures , 2004 .

[26]  Norval Dobbs,et al.  Structures to Resist the Effects of Accidental Explosions. Volume 3. Principles of Dynamic Analysis , 1984 .

[27]  David A. Nethercot,et al.  Modelling steel frame behaviour under fire conditions , 1991 .

[28]  Chu-Kia Wang,et al.  Reinforced Concrete Design , 1965 .

[29]  Robert Smilowitz,et al.  Blast Resistant Design of Commercial Buildings , 1996 .

[30]  Man-Biu Bill Wong.  Elastic and plastic methods for numerical modelling of steel structures subject to fire , 2001 .

[31]  R. Minne,et al.  Buckling of steel columns in fire conditions , 1981 .

[32]  T. Krauthammer.  Blast mitigation technologies: developments and numerical considerations for behavior assessment and design , 1970 .

[33]  J. Y. Richard Liew,et al.  Nonlinear Plastic Hinge Analysis of Three-Dimensional Steel Frames in Fire , 2004 .

[34]  S. R. Bodner,et al.  PLASTIC DEFORMATIONS IN IMPACT AND IMPULSIVE LOADING OF BEAMS , 1960 .

[35]  Hong Chen,et al.  Spread-of-plasticity analysis of three-dimensional steel frames , 2002 .

[36]  J. Y. Richard Liew.  Performance Based Fire Safety Design of Structures — A Multi-Dimensional Integration , 2004 .

[37]  G. Cowper,et al.  STRAIN-HARDENING AND STRAIN-RATE EFFECTS IN THE IMPACT LOADING OF CANTILEVER BEAMS , 1957 .