Electric current-driven migration of electrically neutral particles in liquids

We design and experimentally demonstrate a migration of electrically neutral particles in liquids driven by electric current according to the discrepancies of their electrical conductivities. A force from electric current to electrically neutral particles has been identified to drive the particles toward the lateral surface from the centre of suspension via three distinguishable zones, namely, pushing, trapping, and expelling zones. The driving force can overtake gravity in practical cases. The property of the force is found neither similar to that of the force in electromagnetophoresis nor similar to that of the electromigration force in terms of direction and magnitude. An expression for the force at the pushing zone has been developed based on the numerical calculation of the thermodynamics of suspension fluids. The excellent agreement between numerical calculations and experimental data demonstrates that our calculation provides fundamental and predictive insight into particles separation from the liquids. Therefore, it is possible to use the force in many engineering applications such as separation of particles according to the differences of their electrical conductivities.

[1]  C. Shek,et al.  On the thermodynamics and kinetics of electropulsing induced dissolution of β-Mg17Al12 phase in an aged Mg–9Al–1Zn alloy , 2009 .

[2]  King-Ning Tu,et al.  Current-crowding-induced electromigration failure in flip chip solder joints , 2002 .

[3]  S. Taniguchi,et al.  Model Experiment on Inclusion Removal by Bubble Flotation Accompanied by Particle Coagulation in Turbulent Flow , 2009 .

[4]  P. Ho,et al.  Mode II electromigration failure mechanism in Sn-based Pb-free solder joints with Ni under-bump metallization , 2013 .

[5]  Rongshan Qin,et al.  Electropulse-induced cementite nanoparticle formation in deformed pearlitic steels , 2011 .

[6]  Elperin,et al.  Thermodynamics of phase transitions in current-carrying conductors. , 1993, Physical review. B, Condensed matter.

[7]  Jun Luo,et al.  Refining mechanism of the electric current pulse on the solidification structure of pure aluminum , 2007 .

[8]  Kenneth C. Mills,et al.  The Role of Mould Fluxes in Continuous Casting-So Simple Yet So Complex , 2003 .

[9]  H. Watarai,et al.  Magnetophoresis and electromagnetophoresis of microparticles in liquids , 2004, Analytical and bioanalytical chemistry.

[10]  Xiukun Wu,et al.  Segregation of lead in Cu–Zn alloy under electric current pulses , 2006 .

[11]  Xiangjun Zuo,et al.  Flow Transport and Inclusion Motion in Steel Continuous-Casting Mold under Submerged Entry Nozzle Clogging Condition , 2008 .

[12]  A. Kolin,et al.  Theory of Electromagnetophoresis. I. Magnetohydrodynamic Forces Experienced by Spherical and Symmetrically Oriented Cylindrical Particles , 1954 .

[13]  Hiroshi Harada,et al.  Evaluation of Multiphase Phenomena in Mold Pool under In-mold Electromagnetic Stirring in Steel Continuous Casting , 2001 .

[14]  Brian G. Thomas,et al.  Inclusion removal by bubble flotation in a continuous casting mold , 2004 .

[15]  Jian Ku Shang,et al.  Abnormal polarity effect of electromigration on intermetallic compound formation in Sn-9Zn solder interconnect , 2007 .

[16]  P. Schiffer,et al.  Capillary magnetic field flow fractionation and analysis of magnetic nanoparticles. , 2005, Analytical chemistry.

[17]  A. Kolin An Electromagnetokinetic Phenomenon Involving Migration of Neutral Particles. , 1953, Science.

[18]  Wenjun Lu,et al.  Removal of MnS inclusions in molten steel using electropulsing , 2013 .

[19]  P. Ho,et al.  Electromigration in metals , 1989 .