Effects of silanization of C/C composites and grafting of h-BN fillers on the microstructure and interfacial properties of CVI-based C/C-BN composites

[1]  L. Pan,et al.  Effect of powdered h-BN as addition on the microstructure and mechanical properties of C/C composites fabricated by chemical vapor infiltration , 2019, Materials Science and Engineering: A.

[2]  Yang Li,et al.  Microstructures and tribological properties of carbon/carbon-boron nitride composites fabricated by powdered additives and chemical vapor infiltration , 2017 .

[3]  Dmitri Golberg,et al.  Functionalized hexagonal boron nitride nanomaterials: emerging properties and applications. , 2016, Chemical Society reviews.

[4]  Yudong Huang,et al.  Interfacial properties and impact toughness of methylphenylsilicone resin composites by chemically grafting POSS and tetraethylenepentamine onto carbon fibers , 2016 .

[5]  H. Ogawa,et al.  Dielectric and thermal properties of isotactic polypropylene/hexagonal boron nitride composites for high-frequency applications , 2014 .

[6]  Kehe Su,et al.  Thermodynamic study on the chemical vapor deposition of boron nitride from the BCl3–NH3–H2 system , 2014, Theoretical Chemistry Accounts.

[7]  S. Dong,et al.  Corrigendum to: Mechanical properties and microstructures of 2D Cf/ZrC–SiC composites using ZrC precursor and polycarbosilane , 2014 .

[8]  S. Dong,et al.  Fabrication and properties of 3-D Cf/ZrC–SiC composites via in-situ reaction , 2014 .

[9]  H. Hu,et al.  Effects of TaC amount on the properties of 2D C/SiC–TaC composites prepared via precursor infiltration and pyrolysis , 2013 .

[10]  S. Dong,et al.  Fabrication and properties of 3-D Cf/ZrC–SiC composites by the vapor silicon infiltration process , 2013 .

[11]  X. Xiong,et al.  Preparation and tribological properties of C fibre reinforced C/SiC dual matrix composites fabrication by liquid silicon infiltration , 2013 .

[12]  Lai-fei Cheng,et al.  Microstructure and tribological behaviors of C/C–BN composites fabricated by chemical vapor infiltration , 2012 .

[13]  Jin‐San Yoon,et al.  Surface modification of carbon fiber and the mechanical properties of the silicone rubber/carbon fiber composites , 2012 .

[14]  Yudong Huang,et al.  Formation of a carbon fiber/polyhedral oligomeric silsesquioxane/carbon nanotube hybrid reinforcement and its effect on the interfacial properties of carbon fiber/epoxy composites , 2011 .

[15]  Yequn Liu,et al.  Effect of in situ grown carbon nanotubes on the structure and mechanical properties of unidirectional carbon/carbon composites , 2011 .

[16]  Chao Gao,et al.  Making silica nanoparticle-covered graphene oxide nanohybrids as general building blocks for large-area superhydrophilic coatings. , 2011, Nanoscale.

[17]  Lai-fei Cheng,et al.  Wear mechanisms of the C/SiC brake materials , 2011 .

[18]  Xu Yongdong,et al.  Effects of TaC addition on the ablation resistance of C/SiC , 2010 .

[19]  H. Hu,et al.  Preparation and characterization of C/SiC–ZrB2 composites by precursor infiltration and pyrolysis process , 2010 .

[20]  Lai-fei Cheng,et al.  Preparation and properties of 2D C/ZrB2-SiC ultra high temperature ceramic composites , 2009 .

[21]  Jiecai Han,et al.  Characterization of hot-pressed short carbon fiber reinforced ZrB2–SiC ultra-high temperature ceramic composites , 2009 .

[22]  Jingyi Deng,et al.  Comparison of thermal and ablation behaviors of C/SiC composites and C/ZrB2–SiC composites , 2009 .

[23]  Yong Huang,et al.  Surface characteristics and aqueous dispersibility of commercial silicon nitride powders: Effects of acid leaching, surface hydrolysis, and thermal oxidation , 2008 .

[24]  S. Dong,et al.  Fabrication and Properties of C f /SiC-ZrC Composites , 2008 .

[25]  R. Weiss,et al.  Carbon/Carbons and Their Industrial Applications , 2008 .

[26]  Walter Krenkel,et al.  Ceramic Matrix Composites , 2008 .

[27]  C. Lesniak,et al.  Boron nitride (BN) and BN composites for high-temperature applications , 2008 .

[28]  R. Gadow,et al.  Multilayer C/SIC Composites for Automotive Brake Systems , 2007 .

[29]  Sufang Tang,et al.  Fabrication and Characterization of an Ultra‐High‐Temperature Carbon Fiber‐Reinforced ZrB2–SiC Matrix Composite , 2007 .

[30]  M. Weinmann,et al.  Fabrication of Fiber‐Reinforced Ceramic Composites by the Modified Slurry Infiltration Technique , 2007 .

[31]  Jang‐Kyo Kim,et al.  Functionalization of carbon nanotubes using a silane coupling agent , 2006 .

[32]  A. Odeshi,et al.  Manufacture and characterisation of a low cost carbon fibre reinforced C/SiC dual matrix composite , 2006 .

[33]  M. Leuchs,et al.  Applications of Non‐Oxide CMCs , 2006 .

[34]  J. Economy,et al.  High density carbon fiber/boron nitride matrix composites: Fabrication of composites with exceptional wear resistance , 2005 .

[35]  M. Petrescu.  Boron nitride theoretical hardness compared to carbon polymorphs , 2004 .

[36]  R. Naslain.  Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview , 2004 .

[37]  J. Economy,et al.  Carbon/carbon–boron nitride composites with improved wear resistance compared to carbon/carbon , 2004 .

[38]  A. Kohyama,et al.  Effect of SiC particle dispersion on microstructure and mechanical properties of polymer-derived SiC/SiC composite , 2003 .

[39]  Jinlong Yang,et al.  Effects of liquid medium and ball-milling on the surface group and aqueous dispersibility of Si3N4 powder , 2003 .

[40]  R. Piat,et al.  Modeling the effect of microstructure on the coefficients of thermal expansion of pyrolytic carbon , 2003 .

[41]  Michael J. Hoffmann,et al.  Microstructure and mechanical properties of carbon–carbon composites with multilayered pyrocarbon matrix , 2002 .

[42]  X. Bourrat,et al.  Regenerative laminar pyrocarbon , 2002 .

[43]  R. Day,et al.  Carbon fibre-reinforced CMCs by PCS infiltration , 2001 .

[44]  Soojin Park,et al.  The effects of MoSi2 on the oxidation behavior of carbon/carbon composites , 2001 .

[45]  Soojin Park,et al.  Effect of anti-oxidative filler on the interfacial mechanical properties of carbon–carbon composites measured at high temperature , 2000 .

[46]  Soojin Park,et al.  Influence of molybdenum disilicide filler on carbon-carbon composites , 1999 .

[47]  P. Greil.  Active‐Filler‐Controlled Pyrolysis of Preceramic Polymers , 1995 .

[48]  J. Economy,et al.  Oxidative and hydrolytic stability of boron nitride — A new approach to improving the oxidation resistance of carbonaceous structures , 1995 .

[49]  P. Greil,et al.  Microstructure Development of Oxycarbide Composites during Active‐Filler‐Controlled Polymer Pyrolysis , 1993 .

[50]  W. Sinclair,et al.  Microstructure and thermal shock behaviour of BN composites , 1987 .

[51]  I. F. Coffin.  STRUCTURE-PROPERTY RELATIONS FOR PYROLYTIC GRAPHITE , 1964 .