Implementation of reactive and resistive load matching for optimal energy harvesting from piezoelectric generators

This paper discusses the implementation of an equivalent resistive-reactive load for the optimum energy harvesting from vibration sources. In photovoltaic applications, the converter impedance that ensures the maximum power is real and the Maximum Power Point Tracker (MPPT) uses a single variable optimization algorithm (resistive load matching). The piezoelectric generator, instead, is characterized by a high capacitive impedance. Thus, the optimal power generation is obtained by a resistive and reactive load impedance (resistive and reactive load matching). Taking into account that the load matching inductor should be changed depending on the excitation frequency and it is usually impractically large if implemented by a passive element, the adaptive resistive-inductive (RL) impedance is here implemented using a bidirectional dc-dc converters and their parameters are tuned using a two-dimentional MPPT using the downhill simplex method. Simulation and experimental results obtained on a prototype, where the digital control has been implemented on a microcontroller platform, confirm the proposed analysis and the performance achievable by the proposed method. The resistive and reactive load matching strongly increases the power generation especially for excitation frequencies different from the resonant and antiresonant frequencies of the piezoelectric generator.

[1]  Joseph A. Paradiso,et al.  Energy scavenging for mobile and wireless electronics , 2005, IEEE Pervasive Computing.

[2]  Rajeevan Amirtharajah,et al.  Integrated Solar Energy Harvesting and Storage , 2009, IEEE Transactions on Very Large Scale Integration (VLSI) Systems.

[3]  Daniel J. Inman,et al.  On the optimal energy harvesting from a vibration source using a PZT stack , 2009 .

[4]  R. Zane,et al.  Recycling ambient microwave energy with broad-band rectenna arrays , 2004, IEEE Transactions on Microwave Theory and Techniques.

[5]  Shadrach Roundy,et al.  On the Effectiveness of Vibration-based Energy Harvesting , 2005 .

[6]  M.H. Mickle,et al.  RF energy harvesting with multiple antennas in the same space , 2005, IEEE Antennas and Propagation Magazine.

[7]  Jan M. Rabaey,et al.  Energy Scavenging for Wireless Sensor Networks: with Special Focus on Vibrations , 2012 .

[8]  Roy Want,et al.  Guest Editors' Introduction: Energy Harvesting and Conservation , 2005, IEEE Pervasive Comput..

[9]  John A. Nelder,et al.  A Simplex Method for Function Minimization , 1965, Comput. J..

[10]  Pai H. Chou,et al.  Everlast: long-life, supercapacitor-operated wireless sensor node , 2005, SenSys '05.

[11]  G.K. Ottman,et al.  Optimized piezoelectric energy harvesting circuit using step-down converter in discontinuous conduction mode , 2002, 2002 IEEE 33rd Annual IEEE Power Electronics Specialists Conference. Proceedings (Cat. No.02CH37289).

[12]  Heath Hofmann,et al.  Adaptive piezoelectric energy harvesting circuit for wireless, remote power supply , 2001 .

[13]  Joseph A. Paradiso,et al.  Energy Scavenging with Shoe-Mounted Piezoelectrics , 2001, IEEE Micro.

[14]  C. Pereira,et al.  Piezoelectric-based power sources for harvesting energy from platforms with low-frequency vibration , 2006, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[15]  Anantha Chandrakasan,et al.  Vibration-to-electric energy conversion , 1999, Proceedings. 1999 International Symposium on Low Power Electronics and Design (Cat. No.99TH8477).

[16]  Heath Hofmann,et al.  Optimized piezoelectric energy harvesting circuit using step-down converter in discontinuous conduction mode , 2003 .

[17]  Jan M. Rabaey,et al.  Improving power output for vibration-based energy scavengers , 2005, IEEE Pervasive Computing.