论文信息 - Coolant Effects on Tool Wear in Machining Single-Crystal Silicon with Diamond Tools

Coolant Effects on Tool Wear in Machining Single-Crystal Silicon with Diamond Tools

The service life of a diamond tool in cutting single-crystal silicon is normally very short because of severe tool wear. Therefore, it is important to use a proper coolant in order to restrain tool wear. In this paper, the performances of oil-based and water-based coolants were compared in silicon machining by investigating cutting forces and tool wear geometries. The water-based coolant was found to restrain flank wear more effectively than the oil-based one. The effective tool life using the water-based one was averagely three times longer than that using the oil-based one. The tool wear mechanism might be related to microplasma generated between silicon and diamond during cutting.

[1] K. Nakayama. Contact Geometry and Distribution of Plasma Generated in the Vicinity of Sliding Contact , 2007 .

[2] K.H.W. Seah,et al. Performance of single crystal diamond tools in ductile mode cutting of silicon , 2007 .

[3] Paul Shore,et al. 3D characterisation of tool wear whilst diamond turning silicon , 2007 .

[4] M. Rahman,et al. Tool wear characteristics and their effects on nanoscale ductile mode cutting of silicon wafer , 2005 .

[5] K. Nakayama,et al. The Energy of Electrons Emitted from Wearing Solid Surfaces , 2004 .

[6] Jun'ichi Tamaki,et al. Some observations on the wear of diamond tools in ultra-precision cutting of single-crystal silicon , 2003 .

[7] Tsunemoto Kuriyagawa,et al. Ductile-brittle transition at large negative tool rake angles , 2000 .

[8] Ronald O. Scattergood,et al. Ductile‐Regime Machining of Germanium and Silicon , 1990 .

[9] K. Nakayama. Microplasma Generated in a Gap of Sliding Contact , 2007 .

[10] Tsunemoto Kuriyagawa,et al. High-efficiency machining of single-crystal germanium using large-radius diamond tools , 2007 .

[11] Nakasuji Tomoaki,et al. Diamond Turning of Brittle Materials for Optical Components , 1990 .

[12] R. C. Weast. CRC Handbook of Chemistry and Physics , 1973 .