Effect of frequency, body parts and surrounding on the on-body propagation channel around the torso

Wearable medical devices can be positioned around the torso for monitoring of critical health parameters. The signal transmission between them is through a wireless link over an on-body propagation channel. In this paper, the effect of some factors which could influence the propagation channel around the torso as: (a) frequency of operation (b) positions of the arms (c) material of a chair used, have been investigated. Moreover, a comparison between the link loss around the torso of a full body phantom and a truncated torso phantom has been done. It is found that the frequency of operation and the positions of the arms have a significant influence on the channel. The difference between the link loss of a full body phantom and a truncated phantom is found to be minimal, indicating a possibility of using a truncated torso for a faster simulation. The results presented in the paper gives an insight in to the influence of arms and the frequency of operation on the propagation channel around the torso and thus would be beneficial for designing a reliable wireless link.

[1]  Kyung Sup Kwak,et al.  An overview of IEEE 802.15.6 standard , 2010, 2010 3rd International Symposium on Applied Sciences in Biomedical and Communication Technologies (ISABEL 2010).

[2]  Yang Hao,et al.  Subject-specific analysis of the on-body radio propagation channel adopting a parallel FDTD code , 2010, Proceedings of the Fourth European Conference on Antennas and Propagation.

[3]  Anders J Johansson.  Wave-propagation from medical implants-influence of body shape on radiation pattern , 2002, Proceedings of the Second Joint 24th Annual Conference and the Annual Fall Meeting of the Biomedical Engineering Society] [Engineering in Medicine and Biology.

[4]  A. Fort,et al.  A Body Area Propagation Model Derived From Fundamental Principles: Analytical Analysis and Comparison With Measurements , 2010, IEEE Transactions on Antennas and Propagation.

[5]  Yang Hao,et al.  Arm movements effect on ultra wideband on-body propagation channels and radio systems , 2009, 2009 Loughborough Antennas & Propagation Conference.

[6]  Julien Ryckaert,et al.  Channel model for wireless communication around human body , 2004 .

[7]  G. A. Conway,et al.  An analytical path-loss model for on-body radio propagation , 2010, 2010 URSI International Symposium on Electromagnetic Theory.

[8]  Anders J Johansson,et al.  Influence on the ear-to-ear link loss from heterogeneous head phantom variations , 2011, Proceedings of the 5th European Conference on Antennas and Propagation (EUCAP).

[9]  G. Delhomme,et al.  Wearable Medical Devices Using Textile and Flexible Technologies for Ambulatory Monitoring , 2005, 2005 IEEE Engineering in Medicine and Biology 27th Annual Conference.

[10]  R. Chandra,et al.  An elliptical analytic link loss model for wireless propagation around the human torso , 2012, 2012 6th European Conference on Antennas and Propagation (EUCAP).

[11]  Yang Hao,et al.  UWB on-body radio channel modeling using ray theory and subband FDTD method , 2006, IEEE Transactions on Microwave Theory and Techniques.

[12]  Constantine A. Balanis,et al.  Aperture radiation from an axially slotted elliptical conducting cylinder using geometrical theory of diffraction , 1969 .

[13]  Ryuji Kohno,et al.  Standardization for Body Area Networks , 2009, IEICE Trans. Commun..

[14]  P. S. Hall,et al.  Novel Yagi-Uda antennas for on-body communication at 60GHz , 2010, 2010 Loughborough Antennas & Propagation Conference.