Review on Modeling and Simulation of the Electric Arc Furnace (EAF)

[1]  E. Brusa.  Thermomechanical coupling effect of graphite electrodes upon the electric arc furnace dynamics , 2014 .

[2]  Herbert Pfeifer,et al.  Modelling of EAF Off-Gas Post Combustion in Dedusting Systems using CFD Methods , 2003 .

[3]  Xiang Bao,et al.  Simulation and Application of Bottom-Blowing in Electrical Arc Furnace Steelmaking Process , 2015 .

[4]  Igor Škrjanc,et al.  Low Computational-complexity Model of EAF Arc-heat Distribution , 2015 .

[5]  A. Conejo,et al.  Process dynamics of electric arc furnace during direct reduced iron melting , 2002 .

[6]  A. Conejo,et al.  Theoretical analysis of the interfacial phenomena during the injection of carbon particles into EAF slags , 2001 .

[7]  N. Provatas,et al.  Kinetics of Scrap Melting in Liquid Steel: Multipiece Scrap Melting , 2008 .

[8]  C. W. Hirt,et al.  Volume of fluid (VOF) method for the dynamics of free boundaries , 1981 .

[9]  F. Wang,et al.  Numerical study of dc arc plasma and molten bath in dc electric arc furnace , 2006 .

[10]  Igor Škrjanc,et al.  A Computational Model for Heat Transfer Coefficient Estimation in Electric Arc Furnace , 2016 .

[11]  B. Blanpain,et al.  An introduction to phase-field modeling of microstructure evolution , 2008 .

[12]  Igor Škrjanc,et al.  Mathematical Modeling and Experimental Validation of an Electric Arc Furnace , 2011 .

[13]  Geoffrey Brooks,et al.  Computational Fluid Dynamics Modeling of Supersonic Coherent Jets for Electric Arc Furnace Steelmaking Process , 2010 .

[14]  M. López-Cornejo,et al.  Mathematical Modeling of the Melting Rate of Metallic Particles in the EAF under Multiphase Flow , 2015 .

[15]  J. Szekely,et al.  The melting and dissolution of low-carbon steels in iron-carbon melts , 1972 .

[16]  S. Hara,et al.  Slag-foaming Phenomenon in Pyrometallurgical Processes , 1992 .

[17]  M. Sano,et al.  Effect of Slag Foaming on the Reduction of Iron Oxide in Molten Slag by Graphite , 1992 .

[18]  Marco A. Ramírez-Argáez,et al.  Mathematical Modeling of the Melting Rate of Metallic Particles in the Electric Arc Furnace , 2010 .

[19]  Herbert Pfeifer,et al.  Investigation on the Influence of the Arc Region on Heat and Mass Transport in an EAF Freeboard using Numerical Modeling , 2016 .

[20]  Rodolfo D. Morales,et al.  A Mathematical Simulator for the EAF Steelmaking Process Using Direct Reduced Iron , 2001 .

[21]  Morteza Behbahani-Nejad,et al.  Transient simulation of conjugate heat transfer in the roof cooling panel of an electric arc furnace , 2016 .

[22]  Hiroyuki Matsuura,et al.  Slag Foaming in an Electric Arc Furnace , 2009 .

[23]  A. Conejo,et al.  Mathematical Modeling of the Melting of Sponge Iron in a Bath of Non-reactive Molten Slag , 2015 .

[24]  Ola Widlund,et al.  Mathematical Modeling of Scrap Melting in an EAF Using Electromagnetic Stirring , 2013 .

[25]  Dimitri Papamoschou,et al.  Mean Flow Development in Dual-Stream Compressible Jets , 2002 .

[26]  H. Svendsen,et al.  Theoretical model for drop and bubble breakup in turbulent dispersions , 1996 .

[27]  Igor Škrjanc,et al.  Modeling and Validation of the Radiative Heat Transfer in an Electric Arc Furnace , 2012 .

[29]  M. A. Sattar,et al.  Numerical Simulation of Slag Foaming in High Temperature Molten Metal with Population Balance Modeling , 2013 .

[30]  W. Davenport,et al.  Foams and emulsions in oxygen steelmaking , 1973 .

[31]  Igor Škrjanc,et al.  Modeling and Validation of an Electric Arc Furnace: Part 1, Heat and Mass Transfer , 2012 .

[32]  Nikolas Provatas,et al.  Kinetics of scrap melting in liquid steel , 2005 .

[33]  Igor Škrjanc,et al.  Modeling and Validation of an Electric Arc Furnace: Part 2, Thermo-chemistry , 2012 .

[34]  A. Conejo,et al.  Effect of Foamy Slag Height on Hot Spots Formation inside the Electric Arc Furnace Based on a Radiation Model , 2012 .

[35]  Marco A. Ramírez-Argáez,et al.  Effect of Arc Length on Fluid Flow and Mixing Phenomena in AC Electric Arc Furnaces , 2010 .

[36]  Marco A. Ramírez-Argáez,et al.  Power Delivery from the Arc in AC Electric Arc Furnaces with Different Gas Atmospheres , 2009 .

[37]  Gerardo Trapaga,et al.  Modeling of a DC electric arc furnace - Heat transfer from the arc , 2000 .

[38]  G. Straffelini,et al.  Fluid Dynamics Of A Post-combustion ChamberIn Electric Arc Steelmaking Plants , 2011 .

[39]  H. Blanch,et al.  Bubble coalescence and break‐up in air‐sparged bubble columns , 1990 .

[40]  S. C. Koria,et al.  Penetrability of impinging gas jets in molten steel bath , 1987 .

[41]  Numerical investigation of coaxial jets entering into a hot environment , 2013 .