Model-Based Monitoring and Control of Industrial Freeze-Drying Processes: Effect of Batch Nonuniformity

This article deals with the monitoring and control of the freeze drying of pharmaceuticals in vials taking into account batch heterogeneity. Firstly, the problem of nonuniformity of the batch is addressed: the vials in the chamber of the freeze dryer can, in fact, exhibit different time evolutions due not only to radiation from the wall of the chamber, but also to temperature gradients on the heating shelf, vapor fluid dynamics, and nonuniform inert distribution, as it has been evidenced by means of computational fluid dynamics simulations. Then, the effect of batch heterogeneity on the performance of the monitoring and control system is discussed and a new tool is presented, based on an advanced algorithm, the Dynamic Parameters Estimation, that estimates the state of the system (product temperature and residual ice content) by using the results of the pressure rise test, coupled with a controller (LyoDriver) that changes the shelf temperature in order to maintain product temperature below the maximum allowed value while minimizing the duration of primary drying.

[1]  Nestlé's Products Ltd..  Freeze-drying apparatus. , 1970 .

[2]  Michael J Pikal,et al.  Use of manometric temperature measurement (MTM) and SMART freeze dryer technology for development of an optimized freeze-drying cycle. , 2007, Journal of pharmaceutical sciences.

[3]  A. I. Liapis,et al.  Research and Development Needs and Opportunities in Freeze Drying , 1996 .

[4]  Xiaolin Tang,et al.  Design of Freeze-Drying Processes for Pharmaceuticals: Practical Advice , 2004, Pharmaceutical Research.

[5]  R. Bruttini,et al.  Freeze-drying of pharmaceuticals in vials on trays: effects of drying chamber wall temperature and tray side on lyophilization performance , 2005 .

[6]  Michael J. Pikal,et al.  Evaluation of manometric temperature measurement, a process analytical technology tool for freeze-drying: Part II measurement of dry-layer resistance , 2008, AAPS PharmSciTech.

[7]  Davide Fissore,et al.  On the use of a dual-scale model to improve understanding of a pharmaceutical freeze-drying process. , 2010, Journal of pharmaceutical sciences.

[8]  Davide Fissore,et al.  Model based-monitoring of a non-uniform batch in a freeze-drying process , 2008 .

[9]  Davide Fissore,et al.  In-Line Control of a Freeze-Drying Process in Vials , 2008 .

[10]  Masakazu Kobayashi,et al.  Inter-vial Variance of the Sublimation Rate in Shelf Freeze-dryer , 2011 .

[11]  Hasan Sadikoglu,et al.  Mathematical Modelling of the Primary and Secondary Drying Stages of Bulk Solution Freeze-Drying in Trays: Parameter Estimation and Model Discrimination by Comparison of Theoretical Results With Experimental Data , 1997 .

[12]  S L Nail,et al.  Evaluation of manometric temperature measurement as a method of monitoring product temperature during lyophilization. , 1997, PDA journal of pharmaceutical science and technology.

[13]  R. Bruttini,et al.  Lyophilization in Vials on Trays: Effects of Tray Side , 2005 .

[14]  R. Bruttini,et al.  Heating Policies during the Primary and Secondary Drying Stages of the Lyophilization Process in Vials: Effects of the Arrangement of Vials in Clusters of Square and Hexagonal Arrays on Trays , 2004 .

[15]  Stanley E. Charm,et al.  Freeze Drying , 1964 .

[16]  Antonello Barresi,et al.  Modelling and experimental investigation of radiation effects in a freeze-drying process , 2008 .

[17]  Marco Parvis,et al.  Monitoring of the primary drying of a lyophilization process in vials , 2009 .

[18]  R. Bruttini,et al.  Freeze-Drying of Pharmaceutical Crystalline and Amorphous Solutes in Vials: Dynamic Multi-Dimensional Models of the Primary and Secondary Drying Stages and Qualitative Features of the Moving Interface , 1995 .

[19]  Antonello Barresi,et al.  A gentle PAT approach to in-line control of the lyophilization process , 2007 .

[20]  Michael J. Pikal,et al.  Evaluation of manometric temperature measurement (MTM), a process analytical technology tool in freeze drying, part III: Heat and mass transfer measurement , 2008, AAPS PharmSciTech.

[21]  Xiaolin Tang,et al.  Freeze-Drying Process Design by Manometric Temperature Measurement: Design of a Smart Freeze-Dryer , 2005, Pharmaceutical Research.

[22]  Antonello Barresi,et al.  Development of simplified models for the freeze-drying process and investigation of the optimal operating conditions , 2008 .

[23]  Davide Fissore,et al.  On the Design of an In-Line Control System for a Vial Freeze-Drying Process: The Role of Chamber Pressure , 2009 .

[24]  Hasan Sadikoglu,et al.  Freeze-Drying of Pharmaceutical Products: Research and Development Needs , 2006 .

[25]  Roberto Pisano,et al.  Monitoring and control of a freeze-drying process of pharmaceutical products in vials , 2009 .

[26]  Davide Fissore,et al.  In-line optimization and control of an industrial freeze-drying process for pharmaceuticals. , 2010, Journal of pharmaceutical sciences.

[27]  Antonello Barresi,et al.  Dynamic Parameters Estimation Method: Advanced Manometric Temperature Measurement Approach for Freeze-Drying Monitoring of Pharmaceutical Solutions , 2008 .