Bistable microvalve with pneumatically coupled membranes

The paper reports on a novel bistable electrostatic actuator with pneumatic coupling. Two buckled Si/SiO/sub 2/ membranes span over connected air filled cavities with enclosed driving electrodes. The membranes operate in counteraction. If one electrode is pulled down electrostatically, the other is pushed up pneumatically, and vice versa. The actuator module is designed to achieve a deflection of /spl plusmn/10 /spl mu/m and will be integrated in a microvalve for liquids. With first completed actuator modules the electrostatic/pneumatic driving principle could be demonstrated. Grey-tone lithography has been developed to fabricate curved driving electrodes on the cavity bottom. It is calculated that compared to flat electrodes the driving voltage then can be reduced up to a factor of five. The curved cavity bottom also improves the pneumatic coupling since the enclosed air volume is minimized.

[1]  B. Hok,et al.  Electrostatically Excited Diaphragm Driven As A Loudspeaker , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[2]  Chang-Jin Kim,et al.  A bistable snapping microactuator , 1994, Proceedings IEEE Micro Electro Mechanical Systems An Investigation of Micro Structures, Sensors, Actuators, Machines and Robotic Systems.

[3]  A Bertz,et al.  The formation of very flat silicon sidewalls by dry etching , 1994 .

[4]  J. Söderkvist,et al.  Characteristics of quasi-buckling , 1993 .

[5]  S. Timoshenko.  Theory of Elastic Stability , 1936 .

[6]  B. Halg.  On a micro-electro-mechanical nonvolatile memory cell , 1990 .

[7]  Miko Elwenspoek,et al.  Buckled membranes for microstructures , 1994, Proceedings IEEE Micro Electro Mechanical Systems An Investigation of Micro Structures, Sensors, Actuators, Machines and Robotic Systems.

[8]  J. Branebjerg,et al.  A new electrostatic actuator providing improved stroke length and force , 1992, [1992] Proceedings IEEE Micro Electro Mechanical Systems.

[9]  K. J. Gabriel,et al.  Surface-normal electrostatic/pneumatic actuator , 1992, [1992] Proceedings IEEE Micro Electro Mechanical Systems.

[10]  Hans Joachim Quenzer,et al.  Microfabrication of complex surface topographies using grey-tone lithography , 1995 .

[11]  Michael A. Huff,et al.  A threshold pressure switch utilizing plastic deformation of silicon , 1991, TRANSDUCERS '91: 1991 International Conference on Solid-State Sensors and Actuators. Digest of Technical Papers.

[12]  Mitsuhiro Shikida,et al.  Fabrication Of An Electrostatic Microactuator With An S-shaped Film , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.