Pore-scale study on Rayleigh-Bénard convection formed in the melting process of metal foam composite phase change material

[1]  S. Ahmadi,et al.  Increasing the electrical efficiency and thermal management of a photovoltaic module using expanded graphite (EG)/paraffin-beef tallow-coconut oil composite as phase change material , 2021 .

[2]  Zhengguo Zhang,et al.  Phase change material coat for battery thermal management with integrated rapid heating and cooling functions from −40 °C to 50 °C , 2021 .

[3]  Pushpendra Kumar Singh Rathore,et al.  Enhanced thermophysical properties of organic PCM through shape stabilization for thermal energy storage in buildings: A state of the art review , 2021 .

[4]  Dawei Tang,et al.  Influence of fin parameters on the melting behavior in a horizontal shell-and-tube latent heat storage unit with longitudinal fins , 2021 .

[5]  Jiafei Zhao,et al.  Simulation of forced convective heat transfer in Kelvin cells with optimized skeletons , 2021 .

[6]  Jiafei Zhao,et al.  Comparison of forced convective heat transfer between pillar and real foam structure under high Reynolds number , 2021 .

[7]  Ya-Ling He,et al.  Design of non-uniformly distributed annular fins for a shell-and-tube thermal energy storage unit , 2020 .

[8]  Hongyi Gao,et al.  Smart Utilization of Multifunctional Metal Oxides in Phase Change Materials , 2020, Matter.

[9]  Dawei Tang,et al.  Pore-scale investigation on the heat-storage characteristics of phase change material in graded copper foam , 2020 .

[10]  X. Duan,et al.  Effects of nanoparticles on phase change heat transfer rate in the presence of Rayleigh–Benard convection , 2020 .

[11]  H. Ali,et al.  Nanoparticles enhanced phase change materials (NePCMs)-A recent review , 2020 .

[12]  H. Bahai,et al.  Energy recovery from domestic radiators using a compact composite metal Foam/PCM latent heat storage , 2020, Journal of Cleaner Production.

[13]  X. Duan,et al.  Numerical and Experimental Investigation of Phase Change Heat Transfer in the Presence of Rayleigh–Benard Convection , 2020 .

[14]  Jiafei Zhao,et al.  Pore-scale simulation of forced convection heat transfer under turbulent conditions in open-cell metal foam , 2020, Chemical Engineering Journal.

[15]  X. Sui,et al.  Shape-stabilized hydrated salt/paraffin composite phase change materials for advanced thermal energy storage and management , 2020 .

[16]  Chunwei Zhang,et al.  Performance evaluation and analysis of a vertical heat pipe latent thermal energy storage system with fins-copper foam combination , 2020 .

[17]  A. K. Pathak,et al.  Thermal performance of phase change material integrated heat pipe evacuated tube solar collector system: An experimental assessment , 2020, Energy Conversion and Management.

[18]  Ruzhu Wang,et al.  High energy-density and power-density thermal storage prototype with hydrated salt for hot water and space heating , 2019, Applied Energy.

[19]  Hao Peng,et al.  Solidification performance of a latent heat storage unit with innovative longitudinal triangular fins , 2019, International Journal of Heat and Mass Transfer.

[20]  Emmanuel C. Nsofor,et al.  Hybrid heat transfer enhancement for latent-heat thermal energy storage systems: A review , 2019, International Journal of Heat and Mass Transfer.

[21]  W. Yan,et al.  A critical review on heat transfer augmentation of phase change materials embedded with porous materials/foams , 2019, International Journal of Heat and Mass Transfer.

[22]  H. Bao,et al.  Magnetically-accelerated large-capacity solar-thermal energy storage within high-temperature phase-change materials , 2019, Energy & Environmental Science.

[23]  X. Gong,et al.  Pore-scale numerical simulation of the thermal performance for phase change material embedded in metal foam with cubic periodic cell structure , 2019, Applied Thermal Engineering.

[24]  Wei Yang,et al.  High-performance composite phase change materials for energy conversion based on macroscopically three-dimensional structural materials , 2019, Materials Horizons.

[25]  Hongyi Gao,et al.  Shape-stabilized phase change materials based on porous supports for thermal energy storage applications , 2019, Chemical Engineering Journal.

[26]  V. Jain,et al.  Performance evaluation of nano-enhanced phase change materials during discharge stage in waste heat recovery , 2018, Renewable Energy.

[27]  S. Madruga,et al.  Dynamic of plumes and scaling during the melting of a Phase Change Material heated from below , 2017, International Journal of Heat and Mass Transfer.

[28]  Romeu Vicente,et al.  Phase change materials and carbon nanostructures for thermal energy storage: A literature review , 2017 .

[29]  Liwu Fan,et al.  A pore-scale visualized study of melting heat transfer of a paraffin wax saturated in a copper foam: Effects of the pore size , 2017 .

[30]  Huiying Wu,et al.  Pore scale investigation of heat conduction of high porosity open-cell metal foam/paraffin composite , 2017 .

[31]  Wei Li,et al.  The effect of pore size and porosity on thermal management performance of phase change material infiltrated microcellular metal foams , 2014 .

[32]  R. Ruoff,et al.  Enhanced thermal conductivity of phase change materials with ultrathin-graphite foams for thermal energy storage , 2014 .

[33]  M. Rosen,et al.  Analytical modeling of PCM solidification in a shell and tube finned thermal storage for air conditioning systems , 2012 .

[34]  W. Tao,et al.  Experimental and numerical studies on melting phase change heat transfer in open-cell metallic foams filled with paraffin , 2012 .

[35]  T. L. Bergman,et al.  Enhancement of latent heat energy storage using embedded heat pipes , 2011 .

[36]  Francis Agyenim,et al.  A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS) , 2010 .

[37]  J. Murthy,et al.  Simulation of Thermal Transport in Open-Cell Metal Foams: Effect of Periodic Unit-Cell Structure , 2008 .

[38]  C. Druma,et al.  Analysis of thermal conduction in carbon foams , 2004 .

[39]  Hasan Karabay,et al.  Melting of nanoparticle-enhanced paraffin wax in a rectangular enclosure with partially active walls , 2017 .