Laser and optical properties of Yb:YAG ceramics with layered doping distribution: design, characterization and evaluation of different production processes

The laser, optical and spectroscopic properties of multilayer Yb:YAG ceramic structures, differently activated, were investigated. The structures were designed by means of Finite Element Modeling, adjusting the doping distributions to reduce peak temperature, surface deformation and thermally induced stresses, depending on the pump and cooling geometry. Two ceramic processes were used, i.e. dry pressing of spray-dried powders (SD) and tape casting (TC), resulting in different defect density and size distribution: TC gives a more uniform transmission, whereas SD results in larger, unevenly scattered defects. The spectroscopic properties were found independent from the production process. The laser performance has been characterized under high intensity pumping in a longitudinally diode pumped laser cavity, comparing the behavior of the different structures in terms of slope efficiency, stability under increasing thermal load, spatial uniformity of laser emission. Slope efficiency values as high as 58% in Quasi-CW pumping conditions and 54% in CW conditions was measured in two-layers structures. The production process and the number of layers influenced the behavior of the samples, in particular regarding the spatial uniformity of the laser emission. Samples made by tape casting have shown overall a better thermal stability with respect to the samples made by spray drying.

[1]  Guido Toci,et al.  Lifetime measurements with the pinhole method in presence of radiation trapping: I—theoretical model , 2012 .

[2]  Lloyd L. Chase,et al.  Evaluation of absorption and emission properties of Yb/sup 3+/ doped crystals for laser applications , 1993 .

[3]  S. Kuck,et al.  Preparation and spectroscopy of Yb2+-doped Y3Al5O12, YAlO3, and LiBaF3 , 2000 .

[4]  Georges Boulon,et al.  Multilayered YAG-Yb:YAG ceramics: manufacture and laser performance , 2014 .

[5]  Jean-Christophe Chanteloup,et al.  Yb 3+ :YAG crystal growth with controlled doping distribution , 2012 .

[6]  Martin Nikl,et al.  Charge transfer luminescence in Yb3+-containing compounds , 2004 .

[7]  Matteo Vannini,et al.  Layered Yb:YAG ceramics produced by two different methods: processing, characterization, and comparison , 2016 .

[8]  G. Toci,et al.  3-D numerical simulation of Yb:YAG active slabs with longitudinal doping gradient for thermal load effects assessment. , 2014, Optics express.

[9]  Daniel Vivien,et al.  A simple model for the prediction of thermal conductivity in pure and doped insulating crystals , 2003 .

[10]  Hideki Yagi,et al.  Microhardness and fracture toughness of Y2O3-and Y3Al5O12-based nanocrystalline laser ceramics , 2005 .

[11]  David S. Sumida,et al.  Low-heat high-power scaling using InGaAs-diode-pumped Yb:YAG lasers , 1997 .

[12]  Martin Nikl,et al.  CW and quasi-CW laser performance of 10 at.% Yb3+:LuAG ceramic , 2013 .

[13]  Patrick Georges,et al.  On Yb:CaF2 and Yb:SrF2 : Review of spectroscopic and thermal properties and their impact on femtosecond and high power laser performance , 2011 .

[14]  Matteo Vannini,et al.  Lifetime measurements with the pinhole method in presence of radiation trapping: II—application to Yb3+ doped ceramics and crystals , 2012 .

[15]  Joachim Hein,et al.  Measurement of temperature-dependent absorption and emission spectra of Yb:YAG, Yb:LuAG, and Yb:CaF_2 between 20 °C and 200 °C and predictions on their influence on laser performance , 2012 .

[16]  Matteo Vannini,et al.  First laser oscillation and broad tunability of 1  at. % Yb-doped Sc2O3 and Lu2O3 ceramics. , 2011, Optics letters.

[17]  B. Aull,et al.  Vibronic interactions in Nd:YAG resulting in nonreciprocity of absorption and stimulated emission cross sections , 1982 .

[18]  Klaus Petermann,et al.  Model for the calculation of radiation trapping and description of the pinhole method. , 2007, Optics letters.

[19]  Martin Nikl,et al.  Direct comparison of Yb3+:CaF2 and heavily doped Yb3+:YLF as laser media at room temperature. , 2009, Optics express.