Effect of Gas Diffusion Layer Structure on the Performance of Polymer Electrolyte Membrane Fuel Cell

[1]  Yichun Liu,et al.  Flexible solid-state supercapacitors based on freestanding electrodes of electrospun polyacrylonitrile@polyaniline core-shell nanofibers , 2015 .

[2]  Jong-Won Lee,et al.  A review of gas diffusion layer in PEM fuel cells: Materials and designs , 2012 .

[3]  Eunsook Lee,et al.  Development of a novel hydrophobic/hydrophilic double micro porous layer for use in a cathode gas di , 2011 .

[4]  M. Mench,et al.  Laser perforated fuel cell diffusion media. Part I: Related changes in performance and water content , 2011 .

[5]  Xianguo Li,et al.  Development and impact of sandwich wettability structure for gas distribution media on PEM fuel cell performance , 2011 .

[6]  Zhe Tang,et al.  In situ grown carbon nanotubes on carbon paper as integrated gas diffusion and catalyst layer for proton exchange membrane fuel cells , 2011 .

[7]  S. Yen,et al.  High performance of catalysts supported by directly grown PTFE-free micro-porous CNT layer in a proton exchange membrane fuel cell , 2011 .

[8]  Y. Sung,et al.  Influence of hydrophilicity in micro-porous layer for polymer electrolyte membrane fuel cells , 2011 .

[9]  Branko N. Popov,et al.  Effect of a GDL based on carbon paper or carbon cloth on PEM fuel cell performance , 2011 .

[10]  Nisit Tantavichet,et al.  Novel application of Hicon Black in PEMFC microporous sublayer: Effects of composition and subsequent membrane selection , 2011 .

[11]  R. Schweiss,et al.  Mitigation of Water Management in PEM Fuel Cell Cathodes by Hydrophilic Wicking Microporous Layers , 2010 .

[12]  H. Gharibi,et al.  The synergy between multi-wall carbon nanotubes and Vulcan XC72R in microporous layers , 2010 .

[13]  D. Gerteisen,et al.  Stability and performance improvement of a polymer electrolyte membrane fuel cell stack by laser perforation of gas diffusion layers , 2010 .

[14]  Toshiaki Konomi,et al.  Microporous layer coated gas diffusion layers for enhanced performance of polymer electrolyte fuel cells , 2010 .

[15]  Sheng Wang,et al.  Carbon nanotubes based gas diffusion layers in direct methanol fuel cells , 2010 .

[16]  M. Thommes,et al.  Effect of carbon paper substrate of the gas diffusion layer on the performance of proton exchange membrane fuel cell , 2010 .

[17]  Marta C. Hatzell,et al.  Impact of channel wall hydrophobicity on through-plane water distribution and flooding behavior in a polymer electrolyte fuel cell , 2010 .

[18]  B. Popov,et al.  Effect of cathode GDL characteristics on mass transport in PEM fuel cells , 2009 .

[19]  M. Thommes,et al.  Surface modification of gas diffusion layers by inorganic nanomaterials for performance enhancement of proton exchange membrane fuel cells at low RH conditions , 2009 .

[20]  A. Kannan,et al.  Development of carbon nanotubes based gas diffusion layers by in situ chemical vapor deposition process for proton exchange membrane fuel cells , 2009 .

[21]  B. Popov,et al.  Effect of hydrophobicity and pore geometry in cathode GDL on PEM fuel cell performance , 2009 .

[22]  G. Yin,et al.  Gold‐plated Ni mesh as the gas diffusion medium for air‐breathing direct methanol fuel cell , 2009 .

[23]  Tse-Hao Ko,et al.  Performance of a Polymer Electrolyte Membrane Fuel Cell with Fabricated Carbon Fiber Cloth Electrode , 2008 .

[24]  Tse-Hao Ko,et al.  Effect of carbon fiber paper made from carbon felt with different yard weights on the performance of low temperature proton exchange membrane fuel cells , 2008 .

[25]  Christoph Ziegler,et al.  Enhancing liquid water transport by laser perforation of a GDL in a PEM fuel cell , 2008 .

[26]  Jong-Won Lee,et al.  Effect of PTFE content in microporous layer on water management in PEM fuel cells , 2008 .

[27]  Chun–Chen Yang,et al.  Electrochemical performance of an air-breathing direct methanol fuel cell using poly(vinyl alcohol)/hydroxyapatite composite polymer membrane , 2008 .

[28]  Suresh G. Advani,et al.  Performance of a metallic gas diffusion layer for PEM fuel cells , 2008 .

[29]  A. Kannan,et al.  Carbon nano-chain and carbon nano-fibers based gas diffusion layers for proton exchange membrane fuel cells , 2007 .

[30]  M. Yazici.  Mass transfer layer for liquid fuel cells , 2007 .

[31]  Rong Chen,et al.  A novel electrode architecture for passive direct methanol fuel cells , 2007 .

[32]  Mu Pan,et al.  Porosity-graded micro-porous layers for polymer electrolyte membrane fuel cells , 2007 .

[33]  Chaoyang Wang,et al.  Elucidating differences between carbon paper and carbon cloth in polymer electrolyte fuel cells , 2007 .

[34]  B. Popov,et al.  Effect of carbon loading in microporous layer on PEM fuel cell performance , 2006 .

[35]  Hsin-Fu Huang,et al.  CF4 plasma treatment for preparing gas diffusion layers in membrane electrode assemblies , 2006 .

[36]  B. Yi,et al.  A tubular direct methanol fuel cell with Ti mesh anode , 2006 .

[37]  K. Okazaki,et al.  Micromachined Metallic Thin Films for the Gas Diffusion Layer of PEFCs , 2006 .

[38]  B. Yi,et al.  Preparation and characterization of new anodes based on Ti mesh for direct methanol fuel cells , 2006 .

[39]  Huamin Zhang,et al.  PtRu/Ti anodes with varying Pt ratio: Ru ratio prepared by electrodeposition for the direct methanol fuel cell. , 2006, Physical chemistry chemical physics : PCCP.

[40]  A. Morin,et al.  Characterization of PEMFCs gas diffusion layers properties , 2006 .

[41]  A. Kannan,et al.  Gas diffusion layer using a new type of graphitized nano-carbon PUREBLACK® for proton exchange membrane fuel cells , 2006 .

[42]  Yann Bultel,et al.  Investigation of mass transport in gas diffusion layer at the air cathode of a PEMFC , 2005 .

[43]  David Blackwell,et al.  Water flow in the gas diffusion layer of PEM fuel cells , 2005 .

[44]  Ursula Wittstadt,et al.  Membrane electrode assemblies for unitised regenerative polymer electrolyte fuel cells , 2005 .

[45]  Chao-Yang Wang,et al.  Two-phase transport and the role of micro-porous layer in polymer electrolyte fuel cells , 2004 .

[46]  Chao-Yang Wang,et al.  Effects of hydrophobic polymer content in GDL on power performance of a PEM fuel cell , 2004 .

[47]  Chao-Yang Wang,et al.  Fundamental models for fuel cell engineering. , 2004, Chemical reviews.

[48]  K. Scott,et al.  Direct Methanol Fuel Cells Using Thermally Catalysed Ti Mesh , 2004 .

[49]  A. Weber,et al.  Modeling transport in polymer-electrolyte fuel cells. , 2004, Chemical reviews.

[50]  Chang-Soo Kim,et al.  Effect of PTFE contents in the gas diffusion media on the performance of PEMFC , 2004 .

[51]  K. Scott,et al.  Direct methanol alkaline fuel cell with catalysed metal mesh anodes , 2004 .

[52]  Andreas Schmitz,et al.  Influence of diffusion layer properties on low temperature DMFC , 2004 .

[53]  Tsutomu Ioroi,et al.  Influence of PTFE coating on gas diffusion backing for unitized regenerative polymer electrolyte fuel cells , 2003 .

[54]  Jin Hyun Nam,et al.  Effective diffusivity and water-saturation distribution in single- and two-layer PEMFC diffusion medium , 2003 .

[55]  James M. Fenton,et al.  Characterization of Gas Diffusion Layers for PEMFC , 2004 .

[56]  E. Ticianelli,et al.  Effects of the carbon powder characteristics in the cathode gas diffusion layer on the performance of polymer electrolyte fuel cells , 2002 .

[57]  Tae-Hee Lee,et al.  Influence of pore-size distribution of diffusion layer on mass-transport problems of proton exchange membrane fuel cells , 2002 .

[58]  E. Ticianelli,et al.  Effects of the cathode gas diffusion layer characteristics on the performance of polymer electrolyte fuel cells , 2002 .

[59]  G. Squadrito,et al.  Effects of the Diffusion Layer Characteristics on the Performance of Polymer Electrolyte Fuel Cell Electrodes , 2001 .

[60]  A. Shukla,et al.  Diffusion layer parameters influencing optimal fuel cell performance , 2000 .

[61]  A. Shukla,et al.  Effect of diffusion-layer morphology on the performance of polymer electrolyte fuel cells operating at atmospheric pressure , 2000 .

[62]  G. Squadrito,et al.  Improvement in the diffusion characteristics of low Pt-loaded electrodes for PEFCs , 1999 .

[63]  E. Passalacqua,et al.  Influence of the PTFE content in the diffusion layer of low-Pt loading electrodes for polymer electrolyte fuel cells , 1998 .

[64]  D. Bevers,et al.  Examination of the influence of PTFE coating on the properties of carbon paper in polymer electrolyte fuel cells , 1996 .

[65]  Edson A. Ticianelli,et al.  Development and electrochemical studies of gas diffusion electrodes for polymer electrolyte fuel cells , 1996 .

[66]  G. Maggio,et al.  Influence of electrodic properties on water management in a solid polymer electrolyte fuel cell , 1992 .