A thermo-mechanical cohesive zone model for solder joint lifetime prediction
暂无分享,去创建一个
[1] J. Barber,et al. The Penny-Shaped Interface Crack With Heat Flow, Part 1: Perfect Contact , 1983 .
[2] Pedro P. Camanho,et al. An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models , 2007 .
[3] Mauro Ciappa,et al. Selected failure mechanisms of modern power modules , 2002, Microelectron. Reliab..
[4] Mechanical behaviors of 60/40 tin-lead solder lap joints , 1989 .
[5] S. Manson. Behavior of materials under conditions of thermal stress , 1953 .
[6] Y. Miyashita,et al. Low-cycle fatigue behavior and mechanisms of a lead-free solder 96.5Sn/3.5Ag , 2002 .
[7] A. Majumdar,et al. Thermal Conductance of Delamination Cracks in a Fiber‐Reinforced Ceramic Composite , 2004 .
[8] C. Chao,et al. ANALYTICAL SOLUTIONS AND NUMERICAL EXAMPLES FOR THERMOELASTIC INTERFACE CRACK PROBLEMS IN DISSIMILAR ANISOTROPIC MEDIA , 1994 .
[9] J. Hutchinson,et al. The relation between crack growth resistance and fracture process parameters in elastic-plastic solids , 1992 .
[10] C. Moriconi,et al. Influence of hydrogen coverage on the parameters of a cohesive zone model dedicated to fatigue crack propagation , 2011 .
[11] K. Lee,et al. Determination of thermal stress intensity factors for an interface crack under vertical uniform heat flow , 1991 .
[12] G. I. Barenblatt. THE MATHEMATICAL THEORY OF EQUILIBRIUM CRACKS IN BRITTLE FRACTURE , 1962 .
[13] K. Lee,et al. Thermal stress intensity factors for partially insulated interface crack under uniform heat flow , 1995 .
[14] Qingda Yang,et al. A cohesive zone model for low cycle fatigue life prediction of solder joints , 2004 .
[15] A. Needleman. A Continuum Model for Void Nucleation by Inclusion Debonding , 1987 .
[16] H. Solomon. Fatigue of 60/40 Solder , 1986 .
[17] T. Siegmund,et al. An irreversible cohesive zone model for interface fatigue crack growth simulation , 2003 .
[18] N. Hasebe,et al. Analysis of Kinked Crack under Uniform Heat Flow , 1986 .
[19] M. Geers,et al. Intergranular thermal fatigue damage evolution in SnAgCu lead-free solder , 2008 .
[20] James Barber. STEADY-STATE THERMAL STRESSES CAUSED BY AN IMPERFECTLY CONDUCTING PENNY-SHAPED CRACK IN AN ELASTIC SOLID , 1980 .
[21] Wen-Hwa Chen,et al. Three-dimensional thermal analysis of an infinite solid containing an elliptical surface crack , 1992, International Journal of Fracture.
[22] Gerhard Wachutka,et al. Reliability model for Al wire bonds subjected to heel crack failures , 2000 .
[23] A. Kuo. Effects of Crack Surface Heat Conductance on Stress Intensity Factors , 1990 .
[24] A. Hillerborg,et al. Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements , 1976 .
[25] G. Sih. On the Singular Character of Thermal Stresses Near a Crack Tip , 1962 .
[26] L. Coffin,et al. A Study of the Effects of Cyclic Thermal Stresses on a Ductile Metal , 1954, Journal of Fluids Engineering.
[27] Mgd Marc Geers,et al. Fatigue damage modeling in solder interconnects using a cohesive zone approach , 2005 .
[28] S. Itou. THERMAL STRESSES AROUND A CRACK IN AN ADHESIVE LAYER BETWEEN TWO DISSIMILAR ELASTIC HALF-PLANES , 1993 .
[29] Robert Darveaux,et al. Effect of Simulation Methodology on Solder Joint Crack Growth Correlation and Fatigue Life Prediction , 2002 .
[30] J.H.L. Pang,et al. Mechanical Properties for 95.5Sn–3.8Ag–0.7Cu Lead-Free Solder Alloy , 2005, IEEE Transactions on Components and Packaging Technologies.
[31] A. L. Florence,et al. The linear thermoelastic problem of uniform heat flow disturbed by a penny-shaped insulated crack , 1963 .
[32] D. S. Dugdale. Yielding of steel sheets containing slits , 1960 .
[33] Laurent Champaney,et al. A damage-mechanics-based approach for modelling decohesion in adhesively bonded assemblies , 2006 .
[34] T. Siegmund,et al. Bridging effects in cracked laminates under thermal gradients , 2002 .
[35] P. Camanho,et al. Mixed-Mode Decohesion Finite Elements for the Simulation of Delamination in Composite Materials , 2002 .
[36] Gerard Coquery,et al. Investigation of the heel crack mechanism in Al connections for power electronics modules , 2011, Microelectron. Reliab..
[37] A. D. Crocombe,et al. Predicting fatigue damage in adhesively bonded joints using a cohesive zone model , 2010 .
[38] A. Needleman. An analysis of tensile decohesion along an interface , 1990 .