Properties of lightweight concrete composed of magnesia phosphate cement and expanded polystyrene aggregates

Expanded polystyrene (EPS) concrete is a lightweight concrete with better deformation capacity, but lower strength than conventional concrete. Its application for structural components was limited due to inadequate strength. The present study aims to develop a class of structural grade EPS concrete by replacing Portland cement with magnesia phosphate cement (MPC). The resulting MPC–EPS concrete had a density ranging from 750 to 1,800 kg/m3. Extensive laboratory tests were performed to characterize the strength, drying shrinkage and water absorption properties of the MPC–EPS concrete. The test results showed that the MPC–EPS concrete had a higher early-age strength than the typical EPS concrete, and the rate of strength gain increased with increasing EPS contents. The drying shrinkage potential and water absorption of the MPC–EPS concrete were much lower than those of the typical EPS concrete, indicating that the MPC–EPS concrete could be a building material with high thermal-resistance and good durability.

[1]  J. Pera,et al.  Mechanism of setting reaction in magnesia-phosphate cements , 2000 .

[2]  Zhu Ding,et al.  Effect of aggregates and water contents on the properties of magnesium phospho-silicate cement , 2005 .

[3]  C. Boulay,et al.  Taking into account the inclusions' size in lightweight concrete compressive strength prediction , 2005 .

[4]  Bing Chen,et al.  Mechanical properties of polymer-modified concretes containing expanded polystyrene beads , 2007 .

[5]  Karam Sab,et al.  Particle size effect on EPS lightweight concrete compressive strength: Experimental investigation and modelling , 2007 .

[6]  K. Ganesh Babu,et al.  Properties of lightweight expanded polystyrene aggregate concretes containing fly ash , 2005 .

[7]  R. Ravindrarajah,et al.  Properties of hardened concrete containing treated expanded polystyrene beads , 1994 .

[8]  Karam Sab,et al.  Compressive behavior of an idealized EPS lightweight concrete: size effects and failure mode , 2004 .

[9]  S H Perry,et al.  Mix details and material behaviour of polystyrene aggregate concrete , 1991 .

[10]  Bing Chen,et al.  Properties of lightweight expanded polystyrene concrete reinforced with steel fiber , 2004 .

[11]  Bing Chen,et al.  Mechanical properties of EPS lightweight concrete , 2011 .

[12]  K. Ramamurthy,et al.  STRUCTURE AND PROPERTIES OF AERATED CONCRETE: A REVIEW , 2000 .

[13]  C. Bagon,et al.  Marine floating concrete made with polystyrene expanded beads , 1976 .

[14]  K. Ganesh Babu,et al.  BEHAVIOUR OF LIGHTWEIGHT EXPANDED POLYSTYRENE CONCRETE CONTAINING SILICA FUME , 2003 .

[15]  Abid Nadeem,et al.  Mechanical and drying shrinkage properties of structural-graded polystyrene aggregate concrete , 2008 .

[16]  A. Wagh.  Chemically Bonded Phosphate Ceramics , 2016 .

[17]  Gilles Peix,et al.  Characterization and Simulation of Microstructure and Properties of EPS Lightweight Concrete , 2007 .

[18]  Li Zongjin,et al.  Study of High Early Strength Cement based on Fly Ash, Magnesia and Phosphate , 2005 .