论文信息 - Flow pattern identification of fluidized beds using ECT

Flow pattern identification of fluidized beds using ECT

Electrical capacitance tomography (ECT) was applied in measuring solids distribution in square circulating fluidized beds. The fluidization conditions varied from bubbling fluidized bed to circulating fluidized bed. In the whole range of fluidization conditions, ECT was able to instantaneously provide the solids concentration and voids distributions in the fluidized beds. According to the acquired data from ECT and reconstructed image, different fluidization regimes can also be identified.

S. Liu | W. Q. Yang | H. Wang | G. Yan | Z. Pan

[1] J. Yerushalmi,et al. Further studies of the regimes of fluidization , 1979 .

[2] H. T. Bi. Effects of Measurement Method on Velocities Used to Demarcate the Transition to Turbulent Fluidization , 1995 .

[3] W. V. Swaaij. The Design of Gas-Solids Fluid Bed and Related Reactors , 1978 .

[4] Joachim Werther,et al. Solids Motion and Mixing , 1997 .

[5] A. Avidan,et al. Conversion model aids scale-up of mobil's fluid-bed MTG process , 1986 .

[6] John R. Grace,et al. Reactor modeling for high-velocity fluidized beds , 1997 .

[7] Natural gas combustion in a catalytic turbulent fluidized bed , 1994 .

[8] J. Grace,et al. The transition to turbulent fluidization : Chemical reaction engineering , 1992 .

[9] Wuqiang Yang,et al. Electrical capacitance tomography with square sensor , 1999 .

[10] Hsiaotao Bi,et al. Introduction to Circulating Fluidized Beds , 1997 .

[11] Wuqiang Yang,et al. Optimization of an iterative image reconstruction algorithm for electrical capacitance tomography , 1999 .

[12] T. Dyakowski,et al. AN APPLICATION OF ELECTRICAL CAPACITANCE TOMOGRAPHY TO MEASURE GAS-SOLID MOTION IN A FLUIDIZED BED , 1996 .