Investigation of modulation index, operational mode and load type on the SHEM current source inverter

This paper investigated influence of load type, operational mode and modulation index on the SHEM current source inverter. For this purpose an inverter designed and constructed which can be operated in single and three phase mode with any number of harmonics elimination capability. In current source inverters with resistive-inductive loads, over voltages in output voltage waveform appears. To remove this over voltage, we used a capacitor. In this study the effect of this capacitor on the output voltage has been investigated. The result of varying of modulation index shows that the amplitude of the system's harmonics varied with their variation, which can cause undesired effects on the supplied devices with inverter. The effect of these parameters on the CSI, simulated with PSPICE. The comparisons have been done on our laboratorial system outputs, with simulated results. Then it has been shown that experimental results verify the simulation results.

[1]  S. Daher,et al.  Multilevel current source inverter-the switching control strategy for high power application , 1996, Proceedings of the 1996 IEEE IECON. 22nd International Conference on Industrial Electronics, Control, and Instrumentation.

[2]  G. Joos,et al.  A current-source inverter fed induction motor drive system with reduced losses , 1995, IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting.

[3]  Mehrdad Kazerani A direct AC/AC converter based on current-source converter modules , 2003 .

[4]  Henrique A. C. Braga,et al.  Application of a generalized current multilevel cell to current-source inverters , 1999, IEEE Trans. Ind. Electron..

[5]  Karsten P. Ulland,et al.  Vii. References , 2022 .

[6]  B. M. Han,et al.  Static reactive-power compensator using soft-switching current-source inverter , 2001, IEEE Trans. Ind. Electron..

[7]  Frede Blaabjerg,et al.  Power losses in PWM-VSI inverter using NPT or PT IGBT devices , 1994 .

[8]  D. Shen,et al.  Modeling Analysis and Control of a Current Source Inverter-Based STATCOM , 2001, IEEE Power Engineering Review.

[9]  Hamid A. Toliyat,et al.  Current-source-rectifier topologies for sinusoidal supply current: theoretical studies and analyses , 2006, IEEE Transactions on Industrial Electronics.

[10]  Songquan Deng,et al.  A new single-phase multilevel current-source inverter , 2004, Nineteenth Annual IEEE Applied Power Electronics Conference and Exposition, 2004. APEC '04..

[11]  I. Barbi,et al.  Application of a generalized current multilevel cell to a current source inverter , 1995, Proceedings of IECON '95 - 21st Annual Conference on IEEE Industrial Electronics.

[12]  Byung-Moon Han,et al.  Static synchronous compensator using thyristor PWM current source inverter , 2000 .

[13]  Mika Salo,et al.  vector-controlled PWM current-source-inverter-fed induction motor drive with a new stator current control method , 2005, IEEE Transactions on Industrial Electronics.