A metal-mirror-based reflecting polarizing beam splitter

We theoretically investigated the design of a metal-mirror-based reflecting polarizing beam splitter (RPBS). The metal mirror is a silver slab, which is embedded in the substrate of a rectangular silica transmission grating. By using a modal analysis and rigorous coupled-wave analysis, an RPBS grating is designed for operation at 1550 nm. When it is illuminated in Littrow mounting, the transverse electric (TE) and transverse magnetic (TM) waves will be mainly reflected in the minus-first and zeroth orders, respectively. Moreover, a wideband RPBS grating is obtained by adopting the simulated annealing algorithm. The RPBS gratings exhibit high diffraction efficiencies (similar to 95%) and high extinction ratios over a certain angle and wavelength range, especially for the minus-first-order reflection. This kind of RPBS should be useful in practical optical applications.

[1]  Y Fainman,et al.  Polarizing beam splitter based on the anisotropic spectral reflectivity characteristic of form-birefringent multilayer gratings. , 1996, Optics letters.

[2]  H. Tamada,et al.  Al wire-grid polarizer using the s-polarization resonance effect at the 0.8-microm-wavelength band. , 1997, Optics letters.

[3]  A. Lopez,et al.  Wave-plate polarizing beam splitter based on a form-birefringent multilayer grating. , 1998, Optics letters.

[4]  J A Dobrowolski,et al.  High-performance thin-film polarizing beam splitter operating at angles greater than the critical angle. , 2000, Applied optics.

[5]  Y Renotte,et al.  Polarizing holographic beam splitter on a photoresist. , 1995, Optics letters.

[6]  Andreas Tünnermann,et al.  Investigation of the polarization-dependent diffraction of deep dielectric rectangular transmission gratings illuminated in Littrow mounting. , 2007, Applied optics.

[7]  Wen Liu,et al.  Broadband polarizing beam splitter with an embedded metal-wire nanograting. , 2005, Optics letters.

[8]  Yingbai Yan,et al.  Broadband polarizing beam splitter based on the form birefringence of a subwavelength grating in the quasi-static domain. , 2004, Optics letters.

[9]  Changhe Zhou,et al.  Polarizing beam splitter of deep-etched triangular-groove fused-silica gratings. , 2008, Optics letters.

[10]  A. Tünnermann,et al.  Reflective diffractive beam splitter for laser interferometers. , 2007, Applied Optics.

[11]  William L. Goffe,et al.  SIMANN: FORTRAN module to perform Global Optimization of Statistical Functions with Simulated Annealing , 1992 .

[12]  Jérôme Hazart,et al.  A transmission polarizing beam splitter grating , 1999 .

[13]  Thomas K. Gaylord,et al.  Stable implementation of the rigorous coupled-wave analysis for surface-relief gratings: enhanced transmittance matrix approach , 1995 .

[14]  A. Gobbi,et al.  Reflecting polarizing beam splitter. , 1997, Optics letters.

[15]  Changhe Zhou,et al.  Deep-etched high-density fused-silica transmission gratings with high efficiency at a wavelength of 1550 nm. , 2006, Applied optics.

[16]  Changhe Zhou,et al.  Polarizing beam splitter of a deep-etched fused-silica grating. , 2007, Optics letters.