Strain monitoring in reduced graphene o xide‐coated glass fiber/epoxy composite

[1]  Farid Sayar Irani,et al.  Graphene as a Piezoresistive Material in Strain Sensing Applications , 2022, Micromachines.

[2]  C. Sorensen,et al.  Additive manufacturing of continuous carbon fiber reinforced epoxy composite with graphene enhanced interlayer bond toward ultra‐high mechanical properties , 2021, Polymer Composites.

[3]  Adin Ming Tan,et al.  Graphene as a piezo-resistive coating to enable strain monitoring in glass fiber composites , 2021, Composites Science and Technology.

[4]  W. A. Crosby,et al.  Effect of fiber volume fraction on the mechanical properties of randomly oriented glass fiber reinforced polyurethane elastomer with crosshead speeds , 2020 .

[5]  S. Mansour,et al.  XPS and structural studies of high quality graphene oxide and reduced graphene oxide prepared by different chemical oxidation methods , 2019, Ceramics International.

[6]  Franz Konstantin Fuss,et al.  Benchmarking study of the forces and centre of pressure derived from a novel smart-insole against an existing pressure measuring insole and force plate , 2019, Measurement.

[7]  Adin Ming Tan,et al.  'Electrical viscosity' of piezoresistive sensors: Novel signal processing method, assessment of manufacturing quality, and proposal of an industrial standard. , 2019, Biosensors & bioelectronics.

[8]  Abbas S. Milani,et al.  Piezoresistive sensing in chopped carbon fiber embedded PDMS yarns , 2019, Composites Part B: Engineering.

[9]  Yang Lu,et al.  Recent developments in bio-monitoring via advanced polymer nanocomposite-based wearable strain sensors. , 2019, Biosensors & bioelectronics.

[10]  Pei Huang,et al.  High-Performance Structural Flexible Strain Sensors Based on Graphene-Coated Glass Fabric/Silicone Composite. , 2018, ACS applied materials & interfaces.

[11]  Haroon Mahmood,et al.  Mechanical properties and strain monitoring of glass-epoxy composites with graphene-coated fibers , 2018 .

[12]  R. Umer.  Manufacturing and Mechanical Properties of Graphene Coated Glass Fabric and Epoxy Composites , 2018 .

[13]  N. C. Murmu,et al.  Effect of Thermally Reduced Graphene Oxide on Mechanical Properties of Woven Carbon Fiber/Epoxy Composite , 2018 .

[14]  M. Sasikumar,et al.  Graphene based strain and damage prediction system for polymer composites , 2017 .

[15]  Vladan Koncar,et al.  New Textile Sensors for In Situ Structural Health Monitoring of Textile Reinforced Thermoplastic Composites Based on the Conductive Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) Polymer Complex , 2017, Sensors.

[16]  Olga Troynikov,et al.  Evaluation of Flexible Force Sensors for Pressure Monitoring in Treatment of Chronic Venous Disorders , 2017, Sensors.

[17]  María Sánchez,et al.  Graphene nanoplatelets coated glass fibre fabrics as strain sensors , 2017 .

[18]  Hang Zhao,et al.  Design of Electrically Conductive Structural Composites by Modulating Aligned CVD-Grown Carbon Nanotube Length on Glass Fibers. , 2017, ACS applied materials & interfaces.

[19]  Peng-Cheng Ma,et al.  Comparative study on monitoring structural damage in fiber-reinforced polymers using glass fibers with carbon nanotubes and graphene coating , 2016 .

[20]  H. Cui,et al.  Enhanced mechanical properties of multiscale carbon fiber/epoxy composites by fiber surface treatment with graphene oxide/polyhedral oligomeric silsesquioxane , 2016 .

[21]  Lawrence T. Drzal,et al.  Modifying the carbon fiber–epoxy matrix interphase with graphite nanoplatelets , 2016 .

[22]  Nicola Pugno,et al.  Enhancement of interfacial adhesion in glass fiber/epoxy composites by electrophoretic deposition of graphene oxide on glass fibers , 2016 .

[23]  J. Cauich‐Rodríguez,et al.  Interactions between the glass fiber coating and oxidized carbon nanotubes , 2015 .

[24]  Sida Luo,et al.  Graphite nanoplatelet enabled embeddable fiber sensor for in situ curing monitoring and structural health monitoring of polymeric composites. , 2014, ACS applied materials & interfaces.

[25]  J. Kenny,et al.  The role of irreversible and reversible phenomena in the piezoresistive behavior of graphene epoxy nanocomposites applied to structural health monitoring , 2013 .

[26]  A. Dasari,et al.  Chemical and thermal reduction of graphene oxide and its electrically conductive polylactic acid nanocomposites , 2012 .

[27]  J. Kenny,et al.  Carbon nanofibers for strain and impact damage sensing in glass fiber reinforced composites based on an unsaturated polyester resin , 2011 .

[28]  Jie Zhang,et al.  Glass Fibers with Carbon Nanotube Networks as Multifunctional Sensors , 2010 .

[29]  Junhong Chen,et al.  Reduced graphene oxide for room-temperature gas sensors , 2009, Nanotechnology.

[30]  Rakesh K. Gupta,et al.  Polymer Nanocomposites Handbook , 2009 .

[31]  Chunyu Li,et al.  Sensors and actuators based on carbon nanotubes and their composites: A review , 2008 .

[32]  Klaus Kern,et al.  Electronic transport properties of individual chemically reduced graphene oxide sheets. , 2007, Nano letters.

[33]  R C Haddon,et al.  Multiscale carbon nanotube-carbon fiber reinforcement for advanced epoxy composites. , 2007, Langmuir : the ACS journal of surfaces and colloids.

[34]  Derrick Dean,et al.  S2-Glass/Epoxy Polymer Nanocomposites: Manufacturing, Structures, Thermal and Mechanical Properties , 2003 .

[35]  D. Chung,et al.  Mechanical damage and strain in carbon fiber thermoplastic‐matrix composite, sensed by electrical resistivity measurement , 2002 .

[36]  Long-Gui Tang,et al.  A review of methods for improving the interfacial adhesion between carbon fiber and polymer matrix , 1997 .