Integration of multimode waveguides and micromirror couplers in printed circuit boards using laser ablation

Integration of optical interconnections on a Printed Circuit Board (PCB) is very challenging, as it should remain compatible with existing PCB manufacturing technology based on laminated FR4-substrates and making use of solder-reflow and well-known placement and assembly techniques. In this paper we will describe different technologies being used for integration of such optical interconnections in PCB's. As we will demonstrate, the use of laser ablation, already used in PCB manufacturing for microvia's, is a suitable technique for the fabrication of multimode waveguides and micromirrors to provide optical coupling. Laser ablation is a very flexible technology that is particularly well suited for structuring of polymers because of their excellent UV-absorption properties and highly non-thermal ablation behavior. One of the most critical problems on the integration of optical interconnections in PCB's is coupling the light in and out of the optical plane. Because in our set-up the excimer laser beam can be tilted, the 45 degrees micromirrors can be easily fabricated using laser ablation. The focus is on ablation of waveguides using a frequency tripled Nd-YAG laser and on ablation of 45 degrees facets using a KrF excimer laser. It is shown that these structures can be defined in one single processing step, resulting in a very accurate alignment.

[1]  Emil Wolf,et al.  CHAPTER 1 – BASIC PROPERTIES OF THE ELECTROMAGNETIC FIELD , 1980 .

[2]  S. Imamura,et al.  Polymeric optical waveguide films with 45° mirrors formed with a 90° V-shaped diamond blade , 1997 .

[3]  E. Palik.  Handbook of Optical Constants of Solids , 1997 .

[4]  Wolfgang Ehrfeld,et al.  Micro-optical components for parallel optical networks , 1998, 1998 IEEE/LEOS Summer Topical Meeting. Digest. Broadband Optical Networks and Technologies: An Emerging Reality. Optical MEMS. Smart Pixels. Organic Optics and Optoelectronics (Cat. No.98TH8369).

[5]  James T. Yardley,et al.  Integration of polymeric micro-optical elements with planar waveguiding circuits , 1998, Photonics West.

[6]  Ray T. Chen,et al.  Three-dimensionally interconnected multi-bus-line bidirectional optical backplane , 1999 .

[7]  Peter Van Daele,et al.  Low cost multi-fiber add/drop multiplexer demonstration system. , 1999 .

[8]  Manfred Rode,et al.  Optical backplanes with integrated polymer waveguides , 2000 .

[9]  M. Schaub,et al.  ORMOCER®S – Inorganic-Organic Hybrid Materials for e/o-Interconnection-Technology , 2000 .

[10]  Manabu Kagami,et al.  A polymer optical waveguide with out-of-plane branching mirrors for surface-normal optical interconnections , 2001 .

[11]  E. Griese,et al.  3-Gb/s data transmission with GaAs VCSELs over PCB integrated polymer waveguides , 2001, IEEE Photonics Technology Letters.

[12]  R.T. Chen,et al.  Optoelectronic integration of polymer waveguide array and metal-semiconductor-metal photodetector through micromirror couplers , 2001, IEEE Photonics Technology Letters.

[13]  G. Van Steenberge,et al.  Laser ablation as an enabling technology for opto-boards , 2003, 53rd Electronic Components and Technology Conference, 2003. Proceedings..

[14]  Hugo Thienpont,et al.  Direct writing of microlenses in polycarbonate with excimer laser ablation. , 2003, Applied optics.

[15]  M. Kinoshita,et al.  Implementation of active interposer for high-speed and low-cost chip level optical interconnects , 2003 .

[16]  R. Lytel,et al.  Optical interconnects: out of the box forever? , 2003 .