Jet stability and wall impingement flow field in a thermal striping experiment

[1]  H. Kastl,et al.  Stress and fatigue analysis of SNR-300 mixing devices, including optimizations and thermal shock tests on internal structures , 1984 .

[2]  Einar M. Rønquist,et al.  An Operator-integration-factor splitting method for time-dependent problems: Application to incompressible fluid flow , 1990 .

[3]  Hydraulic similarity in the temperature fluctuation phenomena of non-isothermal coaxial jets , 1990 .

[4]  Hermann F. Fasel,et al.  Outflow Boundary Conditions for Spatial Navier-Stokes Simulations of Transition Boundary Layers , 1993 .

[5]  J. H. Kim,et al.  Thermal stratification and reactor piping integrity , 1993 .

[6]  Soon-Bok Lee.  Thermal fatigue failure and design modification of a steam exhaust silencer , 1995 .

[7]  Akira Tokuhiro,et al.  An experimental investigation on thermal striping: Mixing phenomena of a vertical non-buoyant jet with two adjacent buoyant jets as measured by ultrasound Doppler velocimetry , 1999 .

[8]  Hui Meng,et al.  Experimental study of turbulent mixing in a tee mixer using PIV and PLIF , 2001 .

[9]  Claude Faidy,et al.  High Cycle Thermal Fatigue in French PWR , 2002 .

[10]  K. Christensen.  The influence of peak-locking errors on turbulence statistics computed from PIV ensembles , 2004 .

[11]  S. Benhamadouche,et al.  A synthetic-eddy-method for generating inflow conditions for large-eddy simulations , 2006 .

[12]  Hideki Kamide,et al.  Experimental investigation on transfer characteristics of temperature fluctuation from liquid sodium to wall in parallel triple-jet , 2007 .

[13]  Stephen T. Kreger,et al.  Swept-wavelength interferometric interrogation of fiber Rayleigh scatter for distributed sensing applications , 2007, SPIE Optics East.

[14]  Robert Stieglitz,et al.  Turbulent heat mixing of a heavy liquid metal flow in the MEGAPIE target geometry—The heated jet experiment , 2007 .

[15]  Hidetoshi Hashizume,et al.  Experimental Investigation of Flow Field Structure in Mixing Tee , 2009 .

[16]  Thermal Fatigue in CANDU Stations , 2009 .

[17]  Horst-Michael Prasser,et al.  Investigations on mixing phenomena in single-phase flow in a T-junction geometry , 2009 .

[18]  Hideki Kamide,et al.  Experimental study on fluid mixing phenomena in T-pipe junction with upstream elbow , 2010 .

[19]  Judha Purbolaksono,et al.  Thermal fatigue and corrosion fatigue in heat recovery area wall side tubes , 2010 .

[20]  P. Fischer,et al.  On the numerical simulation of thermal striping in the upper plenum of a fast reactor , 2010 .

[21]  Gavin Tabor,et al.  Inlet conditions for large eddy simulation: A review , 2010 .

[22]  Fulvio Scarano,et al.  Three-dimensional vortex dynamics and convective heat transfer in circular and chevron impinging jets , 2012 .

[23]  Yang Xiao,et al.  Experimental study on three-dimensional temperature fluctuation caused by coaxial-jet flows , 2012 .

[24]  G. Grötzbach,et al.  Challenges in low-Prandtl number heat transfer simulation and modelling , 2013 .

[25]  Jingzhou Zhang,et al.  Flow and heat transfer characteristics under synthetic jets impingement driven by piezoelectric actuator , 2013 .

[26]  D. Tenchine,et al.  Experimental and numerical studies on mixing jets for sodium cooled fast reactors , 2013 .

[27]  Twisted symmetry in multiple impingement jets at low Reynolds number , 2014 .

[28]  Horst-Michael Prasser,et al.  Turbulent penetration in T-junction branch lines with leakage flow , 2014 .

[29]  Imaging flow during impingement of differentially heated jets over a flat surface , 2015 .

[30]  P. Chellapandi,et al.  Thermal hydraulic issues and challenges for current and new generation FBRs , 2015 .

[31]  M. Bovo,et al.  Direct comparison of LES and experiment of a single-pulse impinging jet , 2015 .

[32]  T. Persoons,et al.  Heat transfer and flow characteristics of a pair of adjacent impinging synthetic jets , 2015 .

[33]  S. Honami,et al.  Heat transfer and fluid flow characteristics of impinging jet using combined device with triangular tabs and synthetic jets , 2015 .

[34]  S. Lomperski,et al.  Fiber optic distributed temperature sensor mapping of a jet-mixing flow field , 2015 .

[35]  Y. Hassan,et al.  Laser-Doppler measurements of the turbulent mixing of two rectangular water jets impinging on a stationary pool , 2016 .

[36]  B. Aupoix,et al.  Investigation of an impinging heated jet for a small nozzle-to-plate distance and high Reynolds number: An extensive experimental approach , 2016 .

[37]  Hyun Dong Kim,et al.  Transient temperature field and heat transfer measurement of oblique jet impingement by thermographic phosphor , 2016 .

[38]  Michel Schanen,et al.  On the Strong Scaling of the Spectral Element Solver Nek5000 on Petascale Systems , 2016, EASC.