3D printing in aerospace and its long-term sustainability

ABSTRACT Astonishingly 3D printing has excited the world of aerospace. This paper takes stock of the popular 3D printing processes in aerospace. Reasons for their popularity over the traditional manufacturing processes are dwelled upon. Materials developed specially for aerospace applications along with their characteristics are discussed. Ongoing activities related to 3D printing at various companies and organisations around the world are looked into. Project works in the area of extra-terrestrial printing are also highlighted. Even though 3D printing processes are operationally simple, they do have limitations in terms of the type, quality, and quantity of the materials they can handle. This paper underlines these points while discussing drawbacks of the printed components. Challenges associated with 3D printing in microgravity are also touched upon. Finally, a glimpse is taken into the future appearance of aerospace industry with 3D printing.

[1]  Konrad Wissenbach,et al.  Ductility of a Ti‐6Al‐4V alloy produced by selective laser melting of prealloyed powders , 2010 .

[2]  Neil Hopkinson,et al.  Rapid manufacturing : an industrial revolution for the digital age , 2006 .

[3]  Christopher B. Williams,et al.  Additive manufacturing (AM) and nanotechnology: promises and challenges , 2013 .

[4]  Mark Williamson.  Building a rocket? Press 'P' for print... [3D Printing Space Exploration 3D] , 2015 .

[5]  Barry Berman,et al.  3D printing: the new industrial revolution , 2012, IEEE Engineering Management Review.

[6]  Alexandra Witze,et al.  NASA to send 3D printer into space , 2014, Nature.

[7]  Jan Holmström,et al.  Additive manufacturing in the spare parts supply chain , 2014, Comput. Ind..

[8]  Erica R. H. Fuchs,et al.  Metal additive manufacturing , 2017 .

[9]  Graeme Stemp-Morlock,et al.  Personal fabrication , 2010, Commun. ACM.

[10]  Nicolas Serres,et al.  Environmental comparison of MESO-CLAD® process and conventional machining implementing life cycle assessment , 2011 .

[11]  Zhengxiao Guo,et al.  Microstructural evolution of a Ti-6Al-4V alloy during thermomechanical processing , 2000 .

[12]  Joshua M. Pearce,et al.  Environmental Life Cycle Analysis of Distributed Three-Dimensional Printing and Conventional Manufacturing of Polymer Products , 2013 .

[13]  P. Colegrove,et al.  Microstructure and Mechanical Properties of Wire and Arc Additive Manufactured Ti-6Al-4V , 2013, Metallurgical and Materials Transactions A.

[14]  F. Findik,et al.  Microstructural and mechanical characterization of injection molded 718 superalloy powders , 2013 .

[15]  Jürgen Groll,et al.  Fiber reinforcement during 3D printing , 2015 .

[16]  Ian A. Ashcroft,et al.  ENERGY INPUTS TO ADDITIVE MANUFACTURING: DOES CAPACITY UTILIZATION MATTER? , 2011 .

[17]  Tim Caffrey,et al.  Wohlers report 2013 : additive manufacturing and 3D printing state of the industry : annual worldwide progress report , 2013 .

[18]  Anton J.M. Schoot Uiterkamp,et al.  A global sustainability perspective on 3D printing technologies , 2014 .

[19]  Steve Johnson.  Why Not Just Let 'r Leak? , 2009 .

[20]  Eleonora Atzeni,et al.  Economics of additive manufacturing for end-usable metal parts , 2012 .

[21]  Thomas A. Campbell,et al.  3D printing of multifunctional nanocomposites , 2013 .

[22]  Chee Kai Chua,et al.  3D printing and additive manufacturing : principles and applications , 2015 .

[23]  Fiona Lickorish,et al.  A horizon scan of global conservation issues for 2013. , 2013, Trends in ecology & evolution.

[24]  Joseph R. Davis,et al.  Properties and selection : irons, steels, and high-performance alloys , 1995 .

[25]  F. C. Campbell.  Manufacturing technology for aerospace structural materials , 2006 .

[26]  Vojislav Petrovic,et al.  Additive layered manufacturing: sectors of industrial application shown through case studies , 2011 .

[27]  Martin Baumers,et al.  Economic aspects of additive manufacturing : benefits, costs and energy consumption , 2012 .

[28]  Brett Lyons,et al.  Additive Manufacturing in Aerospace; Examples and Research Outlook , 2014 .

[29]  Bernd Baufeld,et al.  Mechanical Properties of INCONEL 718 Parts Manufactured by Shaped Metal Deposition (SMD) , 2012, Journal of Materials Engineering and Performance.

[30]  R. van Gestel,et al.  Service experience with single crystal superalloys for high pressure turbine shrouds , 2011 .

[31]  Michael McDonald,et al.  Fundamentals of Modern Manufacturing: Materials, Processes and Systems , 2016 .

[32]  J. Ding,et al.  Thermo-mechanical analysis of wire and arc additive manufacturing process , 2012 .

[33]  A. Uriondo,et al.  The present and future of additive manufacturing in the aerospace sector: A review of important aspects , 2015 .

[34]  Miguel Castilho,et al.  Fabrication of computationally designed scaffolds by low temperature 3D printing , 2013, Biofabrication.

[35]  Leon Bennun,et al.  Horizon scan of global conservation issues for 2011. , 2011, Trends in ecology & evolution.

[36]  G. Appa Rao,et al.  Effect of standard heat treatment on the microstructure and mechanical properties of hot isostatically pressed superalloy inconel 718 , 2003 .

[37]  Luca Facchini,et al.  Microstructure and mechanical properties of Ti‐6Al‐4V produced by electron beam melting of pre‐alloyed powders , 2009 .

[38]  Neil Leach,et al.  3D Printing in Space , 2014 .

[39]  Rajiv S. Mishra,et al.  Friction stir additive manufacturing for high structural performance through microstructural control in an Mg based WE43 alloy , 2015 .

[40]  Valentina Colla,et al.  Building components for an outpost on the Lunar soil by means of a novel 3D printing technology , 2014 .

[41]  Karen M. Taminger,et al.  Electron Beam Freeform Fabrication (EBF3) for Cost Effective Near-Net Shape Manufacturing , 2006 .

[42]  Rajiv S. Mishra,et al.  Friction Stir Additive Manufacturing: Route to High Structural Performance , 2015 .

[43]  J S Tiley,et al.  Additive Manufacturing of Aerospace Alloys for Aircraft Structures , 2006 .

[44]  William E. Frazier,et al.  Metal Additive Manufacturing: A Review , 2014, Journal of Materials Engineering and Performance.